[PATCH v2 6/7] i2c: npcm: use i2c frequency table

[Tyrone Ting]

Hi Andi:

Thank you for your review.

Andi Shyti <andi.shyti at kernel.org> 於 2024年9月6日 週五 上午5:43寫道：
>
> Hi,
>
> On Fri, Aug 30, 2024 at 11:46:39AM GMT, Tyrone Ting wrote:
> > Modify i2c frequency from table parameters
> > for NPCM i2c modules.
> >
> > Supported frequencies are:
> >
> > 1. 100KHz
> > 2. 400KHz
> > 3. 1MHz
>
> I agree with Andy, please add a good explanation for this change.
>
> > Signed-off-by: Tyrone Ting <kfting at nuvoton.com>
> > ---
> >  drivers/i2c/busses/i2c-npcm7xx.c | 230 +++++++++++++++++++------------
> >  1 file changed, 144 insertions(+), 86 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
> > index 67d156ed29b9..cac4ea0b69b8 100644
> > --- a/drivers/i2c/busses/i2c-npcm7xx.c
> > +++ b/drivers/i2c/busses/i2c-npcm7xx.c
> > @@ -263,6 +263,121 @@ static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
> >  #define I2C_FREQ_MIN_HZ                      10000
> >  #define I2C_FREQ_MAX_HZ                      I2C_MAX_FAST_MODE_PLUS_FREQ
> >
> > +struct SMB_TIMING_T {
>
> Please run checkpatch.pl before sending the patches.
I did run the checkpatch.pl against this patch.
Here is the log from the checkpatch.pl:
-------------------------------------------------------------
./patch_i2c_v2/v2-0006-i2c-npcm-use-i2c-frequency-table.patch
-------------------------------------------------------------
total: 0 errors, 0 warnings, 265 lines checked

./patch_i2c_v2/v2-0006-i2c-npcm-use-i2c-frequency-table.patch has no
obvious style problems and is ready for submission.

It seems that the values of I2C_FREQ_MIN_HZ and I2C_FREQ_MAX_HZ are
not aligned in the email but they're
aligned in my editor (Vim with a default configuration).
>
> Thanks,
> Andi

Thank you.

Regards,
Tyrone