[PATCH v2] ARM: dts: aspeed: Enable PECI and LPC snoop for IBM System1

[Manojkiran Eda via B4 Relay]

From: Manojkiran Eda <manojkiran.eda at gmail.com>

This patch enables the PECI interface and configures the LPC Snoop for
ports 0x80 and 0x81 in the ASPEED BMC for IBM System1.

Signed-off-by: Manojkiran Eda <manojkiran.eda at gmail.com>
---
This patch enables PECI and LPC snoop functionality on the IBM System1
BMC in the device tree.

The following changes have been made:

1. Enabled the PECI controller (peci0) by marking its status to "okay".
2. Enabled the LPC snoop engine, configuring snoop ports at 0x80 and
   0x81.

These changes are required to support PECI communication and LPC
snooping for system monitoring and debugging purposes.

To: Ninad Palsule <ninad at linux.ibm.com>
To: Joel Stanley <joel at jms.id.au>
To: Andrew Jeffery <andrew at codeconstruct.com.au>
To: openbmc at lists.ozlabs.org
To: Eddie James <eajames at linux.ibm.com>
To: Rob Herring <robh+dt at kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
To: Conor Dooley <conor+dt at kernel.org>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-aspeed at lists.ozlabs.org
Cc: linux-kernel at vger.kernel.org

Changes in v2:
- Added ibm system1 in the subject & added upstream mailing
  list as well for reviews.
- Link to v1: https://lore.kernel.org/r/20240917-dts-aspeed-system1-peci-snoop-v1-1-b967fb3a6735@gmail.com
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index cb3063413d1f..738a86c787c0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -464,6 +464,15 @@ &kcs3 {
 	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 };
 
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
 &i2c0 {
 	status = "okay";
 

---
base-commit: ca2478a7d974f38d29d27acb42a952c7f168916e
change-id: 20240917-dts-aspeed-system1-peci-snoop-725c70f4a485

Best regards,
-- 
Manojkiran Eda <manojkiran.eda at gmail.com>