August 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Aug 1 00:09:59 EST 2012
Ending: Fri Aug 31 20:41:08 EST 2012
Messages: 706

• [PATCH 1/3] powerpc/mpic: finish supporting timer group B on Freescale chips   Sethi Varun-B16395
  • [PATCH 1/3] powerpc/mpic: finish supporting timer group B on Freescale chips   Kumar Gala
• [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support   Kumar Gala
  • [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support   Zhao Chenhui
• [PATCH v8 7/7] powerpc/85xx: add support to JOG feature using cpufreq interface   Kumar Gala
• [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros   Kumar Gala
• [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE   Kumar Gala
• [PATCH v8 3/7] powerpc/85xx: implement hardware timebase sync   Kumar Gala
• [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support   Kumar Gala
• [PATCH] powerpc/fsl: mpic timer driver   Kumar Gala
  • [PATCH] powerpc/fsl: mpic timer driver   Scott Wood
  • [PATCH] powerpc/fsl: mpic timer driver   Wang Dongsheng-B40534
• [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Varun Sethi
  • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Kumar Gala
    • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Scott Wood
      • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Kumar Gala
      • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Sethi Varun-B16395
      • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Kumar Gala
    • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Sethi Varun-B16395
      • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Kumar Gala
      • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Sethi Varun-B16395
      • [PATCH 3/3 v3] powerpc/mpic: FSL MPIC error interrupt support.   Scott Wood
• [PATCH] dma/fsldma: fix a compilation warnings   Liu Qiang-B32616
  • [PATCH] dma/fsldma: fix a compilation warnings   Kumar Gala
• [PATCH] scsi/ibmvscsi: add module alias for ibmvscsic   Brian King
  • [PATCH] scsi/ibmvscsi: add module alias for ibmvscsic   Robert Jennings
  • [PATCH] scsi/ibmvscsi: add module alias for ibmvscsic   Robert Jennings
• [PATCH] powerpc: Update g5_defconfig   Andrey Gusev
• [PATCH v4 3/7] fsl-dma: change release process of dma descriptor for supporting async_tx   Ira W. Snyder
  • [PATCH v4 3/7] fsl-dma: change release process of dma descriptor for supporting async_tx   Liu Qiang-B32616
• [PATCH 0/7] fsl-dma: fixes for Freescale DMA driver   Ira W. Snyder
  • [PATCH 1/7] fsl-dma: remove attribute DMA_INTERRUPT of dmaengine   Ira W. Snyder
  • [PATCH 2/7] fsl-dma: minimize locking overhead   Ira W. Snyder
  • [PATCH 3/7] fsl-dma: add fsl_dma_free_descriptor() to reduce code duplication   Ira W. Snyder
  • [PATCH 4/7] fsl-dma: move functions to avoid forward declarations   Ira W. Snyder
  • [PATCH 5/7] fsl-dma: fix support for async_tx API   Ira W. Snyder
    • [PATCH 5/7] fsl-dma: fix support for async_tx API   Liu Qiang-B32616
  • [PATCH 6/7] fsl-dma: fix a warning of unitialized cookie   Ira W. Snyder
  • [PATCH 7/7] carma: remove unnecessary DMA_INTERRUPT capability   Ira W. Snyder
    • [PATCH 7/7] carma: remove unnecessary DMA_INTERRUPT capability   Liu Qiang-B32616
  • [PATCH 0/7] fsl-dma: fixes for Freescale DMA driver   Liu Qiang-B32616
• [RFC PATCH v5 12/19] memory-hotplug: introduce new function arch_remove_memory()   Wen Congyang
  • [RFC PATCH v5 12/19] memory-hotplug: introduce new function arch_remove_memory()   jencce zhou
    • [RFC PATCH v5 12/19] memory-hotplug: introduce new function arch_remove_memory()   Wen Congyang
• 3.5+: yaboot, Invalid memory access   Tony Breeds
  • 3.5+: yaboot, Invalid memory access   Christian Kujau
• [PATCH V3 1/5] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
  • [PATCH V3 1/5] powerpc/fsl-pci: Unify pci/pcie initialization code   Joakim Tjernlund
• [PATCH -V5 11/13] arch/powerpc: properly isolate kernel and user proto-VSID   Paul Mackerras
  • [PATCH -V5 11/13] arch/powerpc: properly isolate kernel and user proto-VSID   Aneesh Kumar K.V
• [PATCH -V5 03/13] arch/powerpc: Convert virtual address to vpn   Paul Mackerras
  • [PATCH -V5 03/13] arch/powerpc: Convert virtual address to vpn   Aneesh Kumar K.V
• [PATCH -V5 06/13] arch/powerpc: Increase the slice range to 64TB   Paul Mackerras
  • [PATCH -V5 06/13] arch/powerpc: Increase the slice range to 64TB   Aneesh Kumar K.V
• [PATCH -V5 07/13] arch/powerpc: Make some of the PGTABLE_RANGE dependency explicit   Paul Mackerras
  • [PATCH -V5 07/13] arch/powerpc: Make some of the PGTABLE_RANGE dependency explicit   Aneesh Kumar K.V
• [PATCH -V5 08/13] arch/powerpc: Use the rquired number of VSID bits in slbmte   Paul Mackerras
• [PATCH -V5 12/13] arch/powerpc: Replace open coded CONTEXT_BITS value   Paul Mackerras
  • [PATCH -V5 12/13] arch/powerpc: Replace open coded CONTEXT_BITS value   Aneesh Kumar K.V
• [PATCH -V5 13/13] arch/powerpc: Update VSID allocation documentation   Paul Mackerras
  • [PATCH -V5 13/13] arch/powerpc: Update VSID allocation documentation   Aneesh Kumar K.V
• [RFC PATCH v5 16/19] memory-hotplug: free memmap of sparse-vmemmap   Wen Congyang
• [PATCH] vphn: fix arch_update_cpu_topology() return value   Jesse Larrew
• [PATCH 1/8] ppc/pnv: create bus sensitive PEs   Richard Yang
  • [PATCH 1/8] ppc/pnv: create bus sensitive PEs   Gavin Shan
    • [PATCH 1/8] ppc/pnv: create bus sensitive PEs   Richard Yang
      • [PATCH 1/8] ppc/pnv: create bus sensitive PEs   Gavin Shan
• [PATCH v5 0/6] Raid: enable talitos xor offload for improving performance   qiang.liu at freescale.com
• [PATCH v5 1/6] Talitos: Support for async_tx XOR offload   qiang.liu at freescale.com
• [PATCH v5 2/6] fsl-dma: remove attribute DMA_INTERRUPT of dmaengine   qiang.liu at freescale.com
  • [PATCH v5 2/6] fsl-dma: remove attribute DMA_INTERRUPT of dmaengine   Ira W. Snyder
    • [PATCH v5 2/6] fsl-dma: remove attribute DMA_INTERRUPT of dmaengine   Liu Qiang-B32616
• [PATCH v5 3/6] fsl-dma: change release process of dma descriptor for supporting async_tx   qiang.liu at freescale.com
  • [PATCH v5 3/6] fsl-dma: change release process of dma descriptor for supporting async_tx   Liu Qiang-B32616
  • [PATCH v5 3/6] fsl-dma: change release process of dma descriptor for supporting async_tx   Ira W. Snyder
    • [PATCH v5 3/6] fsl-dma: change release process of dma descriptor for supporting async_tx   Liu Qiang-B32616
      • [PATCH v5 3/6] fsl-dma: change release process of dma descriptor for supporting async_tx   Ira W. Snyder
    • [PATCH v5 3/6] fsl-dma: change release process of dma descriptor for supporting async_tx   Liu Qiang-B32616
• [PATCH v5 4/6] fsl-dma: move the function ahead of its invoke function   qiang.liu at freescale.com
  • [PATCH v5 4/6] fsl-dma: move the function ahead of its invoke function   Ira W. Snyder
    • [PATCH v5 4/6] fsl-dma: move the function ahead of its invoke function   Liu Qiang-B32616
• [PATCH v5 5/6] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   qiang.liu at freescale.com
  • [PATCH v5 5/6] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   Ira W. Snyder
    • [PATCH v5 5/6] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   Liu Qiang-B32616
• [PATCH v5 6/6] fsl-dma: fix a warning of unitialized cookie   qiang.liu at freescale.com
  • [PATCH v5 6/6] fsl-dma: fix a warning of unitialized cookie   Ira W. Snyder
• [2/3][PATCH][v2] TDM Framework   Singh Sandeep-B37400
  • [2/3][PATCH][v2] TDM Framework   Greg KH
    • [2/3][PATCH][v2] TDM Framework   Mark Brown
• [PATCH -V6 0/12] arch/powerpc: Add 64TB support to ppc64   Aneesh Kumar K.V
  • [PATCH -V6 01/12] arch/powerpc: Replace open coded CONTEXT_BITS value   Aneesh Kumar K.V
    • [PATCH -V6 01/12] arch/powerpc: Replace open coded CONTEXT_BITS value   Paul Mackerras
  • [PATCH -V6 02/12] arch/powerpc: Use hpt_va to compute virtual address   Aneesh Kumar K.V
  • [PATCH -V6 03/12] arch/powerpc: Simplify hpte_decode   Aneesh Kumar K.V
  • [PATCH -V6 04/12] arch/powerpc: Convert virtual address to vpn   Aneesh Kumar K.V
  • [PATCH -V6 05/12] arch/powerpc: Rename va to vpn   Aneesh Kumar K.V
  • [PATCH -V6 06/12] arch/powerpc: Make KERN_VIRT_SIZE not dependend on PGTABLE_RANGE   Aneesh Kumar K.V
  • [PATCH -V6 07/12] arch/powerpc: Increase the slice range to 64TB   Aneesh Kumar K.V
  • [PATCH -V6 08/12] arch/powerpc: Make some of the PGTABLE_RANGE dependency explicit   Aneesh Kumar K.V
  • [PATCH -V6 09/12] arch/powerpc: Use the required number of VSID bits in slbmte   Aneesh Kumar K.V
  • [PATCH -V6 10/12] arch/powerpc: Use 32bit array for slb cache   Aneesh Kumar K.V
  • [PATCH -V6 11/12] arch/powerpc: Add 64TB support   Aneesh Kumar K.V
  • [PATCH -V6 12/12] arch/powerpc: Update VSID allocation documentation   Aneesh Kumar K.V
• Problem in phy.c, when using fixed network speed   Michael Koch
  • Problem in phy.c, when using fixed network speed   Jenkins, Clive
• [PATCH] powerpc: fix personality handling in ppc64_personality()   Jiri Kosina
  • [PATCH] powerpc: fix personality handling in ppc64_personality()   Andreas Schwab
    • [PATCH v2] powerpc: fix personality handling in ppc64_personality()   Jiri Kosina
• [PATCH] powerpc/smp: Do not disable IPI interrupts during suspend   Zhao Chenhui
  • [PATCH] powerpc/smp: Do not disable IPI interrupts during suspend   Kumar Gala
• Serial interrupt overrun and hard deadlock on 3.3.2 & 3.5, freescale 8347.   Christian Melki
• [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Jia Hongtao-B38951
  • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Jia Hongtao-B38951
    • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Scott Wood
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Kumar Gala
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Jia Hongtao-B38951
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Jia Hongtao-B38951
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Kumar Gala
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Scott Wood
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Jia Hongtao-B38951
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Jia Hongtao-B38951
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Li Yang
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Kumar Gala
      • [PATCH 5/6] powerpc/fsl-pci: Add pci inbound/outbound PM support   Jia Hongtao-B38951
• [PATCH V4 0/3] PCI patch set description   Jia Hongtao
  • [PATCH V4 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Jia Hongtao
    • [PATCH V4 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Kumar Gala
      • [PATCH V4 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Jia Hongtao-B38951
      • [PATCH V4 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Kumar Gala
      • [PATCH V4 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Li Yang
      • [PATCH V4 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Kumar Gala
  • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
    • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Kumar Gala
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
    • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Tabi Timur-B04825
      • [PATCH V4 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
• [PATCH V4 1/3] powerpc/fsl-pci: Only scan PCI bus if configured as a host   Jia Hongtao
• [PATCH] powerpc/crypto: Remove virt_to_abs() usage in nx-842.c   Michael Ellerman
  • [PATCH] powerpc/crypto: Remove virt_to_abs() usage in nx-842.c   Michael Ellerman
  • [PATCH] powerpc/crypto: Remove virt_to_abs() usage in nx-842.c   Seth Jennings
    • [PATCH] powerpc/crypto: Remove virt_to_abs() usage in nx-842.c   Herbert Xu
• [RFC PATCH V6 00/19] memory-hotplug: hot-remove physical memory   wency at cn.fujitsu.com
  • [RFC PATCH V6 01/19] memory-hotplug: rename remove_memory() to offline_memory()/offline_pages()   wency at cn.fujitsu.com
  • [RFC PATCH V6 02/19] memory-hotplug: implement offline_memory()   wency at cn.fujitsu.com
  • [RFC PATCH V6 03/19] memory-hotplug: store the node id in acpi_memory_device   wency at cn.fujitsu.com
  • [RFC PATCH V6 04/19] memory-hotplug: offline and remove memory when removing the memory device   wency at cn.fujitsu.com
    • [RFC PATCH V6 04/19] memory-hotplug: offline and remove memory when removing the memory device   Vasilis Liaskovitis
  • [RFC PATCH V6 05/19] memory-hotplug: check whether memory is present or not   wency at cn.fujitsu.com
  • [RFC PATCH V6 06/19] memory-hotplug: export the function acpi_bus_remove()   wency at cn.fujitsu.com
  • [RFC PATCH V6 07/19] memory-hotplug: call acpi_bus_remove() to remove memory device   wency at cn.fujitsu.com
  • [RFC PATCH V6 08/19] memory-hotplug: remove /sys/firmware/memmap/X sysfs   wency at cn.fujitsu.com
  • [RFC PATCH V6 09/19] memory-hotplug: does not release memory region in PAGES_PER_SECTION chunks   wency at cn.fujitsu.com
  • [RFC PATCH V6 10/19] memory-hotplug: add memory_block_release   wency at cn.fujitsu.com
  • [RFC PATCH V6 11/19] memory-hotplug: remove_memory calls __remove_pages   wency at cn.fujitsu.com
  • [RFC PATCH V6 12/19] memory-hotplug: introduce new function arch_remove_memory()   wency at cn.fujitsu.com
  • [RFC PATCH V6 13/19] memory-hotplug: check page type in get_page_bootmem   wency at cn.fujitsu.com
    • [RFC PATCH V6 13/19] memory-hotplug: check page type in get_page_bootmem   Wen Congyang
  • [RFC PATCH V6 14/19] memory-hotplug: move register_page_bootmem_info_node and put_page_bootmem for sparse-vmemmap   wency at cn.fujitsu.com
  • [RFC PATCH V6 15/19] memory-hotplug: implement register_page_bootmem_info_section of sparse-vmemmap   wency at cn.fujitsu.com
    • [RFC PATCH V6 15/19] memory-hotplug: implement register_page_bootmem_info_section of sparse-vmemmap   Wen Congyang
  • [RFC PATCH V6 16/19] memory-hotplug: free memmap of sparse-vmemmap   wency at cn.fujitsu.com
    • [RFC PATCH V6 16/19] memory-hotplug: free memmap of sparse-vmemmap   Wen Congyang
  • [RFC PATCH V6 17/19] memory_hotplug: clear zone when the memory is removed   wency at cn.fujitsu.com
  • [RFC PATCH V6 18/19] memory-hotplug: add node_device_release   wency at cn.fujitsu.com
  • [RFC PATCH V6 19/19] memory-hotplug: remove sysfs file of node   wency at cn.fujitsu.com
• [PATCH V5 0/3] PCI patch set description   Jia Hongtao
  • [PATCH V5 1/3] powerpc/fsl-pci: Only scan PCI bus if configured as a host   Jia Hongtao
    • [PATCH V5 1/3] powerpc/fsl-pci: Only scan PCI bus if configured as a host   Kumar Gala
  • [PATCH V5 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Jia Hongtao
    • [PATCH V5 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Kumar Gala
      • [PATCH V5 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Tony Breeds
    • [PATCH V5 2/3] powerpc/swiotlb: Enable at early stage and disable if not necessary   Kumar Gala
  • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
    • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Li Yang
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Gala Kumar-B11780
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V5 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
• [PATCH] Power 7+, OProfile: reject samples if marked event and the SIAR valid bit is not set.   Carl E. Love
• [git pull] Please pull powerpc.git merge branch   Kumar Gala
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
    • [git pull] Please pull powerpc.git merge branch   Kumar Gala
      • [git pull] Please pull powerpc.git merge branch (updated)   Kumar Gala
      • [git pull] Please pull powerpc.git merge branch (updated)   Kumar Gala
      • [git pull] Please pull powerpc.git merge branch (updated)   Kumar Gala
      • [git pull] Please pull powerpc.git merge branch (updated)   Kumar Gala
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
• Upstream patch status?? (v3.6-rc1 out)   Gala Kumar-B11780
  • Upstream patch status?? (v3.6-rc1 out)   Kumar Gala
• Threads inheriting debug state from parent threads   Luis Gustavo
  • Threads inheriting debug state from parent threads   Luis Gustavo
    • Threads inheriting debug state from parent threads   Luis Gustavo
• [PATCH 1/4] powepc/booke: Separate out E.HV check and ivor setup code.   Kumar Gala
• [PATCH 2/4] powerpc/booke: Merge the 32 bit e5500/e500mc cpu setup code.   Kumar Gala
  • [PATCH 2/4] powerpc/booke: Merge the 32 bit e5500/e500mc cpu setup code.   Sethi Varun-B16395
    • [PATCH 2/4] powerpc/booke: Merge the 32 bit e5500/e500mc cpu setup code.   Kumar Gala
      • [PATCH 2/4] powerpc/booke: Merge the 32 bit e5500/e500mc cpu setup code.   Sethi Varun-B16395
• [PATCH 3/4] powerpc/booke: Separate out restore_e5500/setup_e5500 routines.   Kumar Gala
• [PATCH 4/4] powerpc/booke: Add CPU_FTR_EMB_HV check for e5500.   Kumar Gala
• [git:v4l-dvb/for_v3.6] edac: Change internal representation to work with layers   Mauro Carvalho Chehab
• [git:v4l-dvb/for_v3.6] edac: move nr_pages to dimm struct   Mauro Carvalho Chehab
• [git:v4l-dvb/for_v3.6] edac: Rename the parent dev to pdev   Mauro Carvalho Chehab
• [git:v4l-dvb/for_v3.6] pasemi_edac: convert driver to use the new edac ABI   Mauro Carvalho Chehab
• [git:v4l-dvb/for_v3.6] edac: move dimm properties to struct dimm_info   Mauro Carvalho Chehab
• [git:v4l-dvb/for_v3.6] edac: change the mem allocation scheme to make Documentation/kobject.txt happy   Mauro Carvalho Chehab
• [PATCH 3/6] arch/powerpc/kvm/e500_tlb.c: fix error return code   Julia Lawall
• [PATCH 1/1] booke/wdt: fix incorrect WDIOC_GETSUPPORT return path   tiejun.chen
  • [PATCH 1/1] booke/wdt: fix incorrect WDIOC_GETSUPPORT return path   Kumar Gala
  • [PATCH 1/1] booke/wdt: fix incorrect WDIOC_GETSUPPORT return path   Tabi Timur-B04825
    • [PATCH 1/1] booke/wdt: fix incorrect WDIOC_GETSUPPORT return path   Tabi Timur-B04825
      • [PATCH 1/1] booke/wdt: fix incorrect WDIOC_GETSUPPORT return path   tiejun.chen
• how to implement platform specific per process parameter?   Alexey Kardashevskiy
  • how to implement platform specific per process parameter?   Anshuman Khandual
• mpc8xxx PCIe hotplug needs fixing, some clues ..   Joakim Tjernlund
• [PATCH v6 0/8] Raid: enable talitos xor offload for improving performance   qiang.liu at freescale.com
  • [PATCH v6 0/8] Raid: enable talitos xor offload for improving performance   Kim Phillips
    • [PATCH v6 0/8] Raid: enable talitos xor offload for improving performance   Liu Qiang-B32616
• [PATCH v6 1/8] Talitos: Support for async_tx XOR offload   qiang.liu at freescale.com
• [PATCH v6 2/8] fsl-dma: remove attribute DMA_INTERRUPT of dmaengine   qiang.liu at freescale.com
• [PATCH v6 3/8] fsl-dma: add fsl_dma_free_descriptor() to reduce code duplication   qiang.liu at freescale.com
• [PATCH v6 4/8] fsl-dma: move functions to avoid forward declarations   qiang.liu at freescale.com
• [PATCH v6 5/8] fsl-dma: change release process of dma descriptor for supporting async_tx   qiang.liu at freescale.com
  • [PATCH v6 5/8] fsl-dma: change release process of dma descriptor for supporting async_tx   Ira W. Snyder
    • [PATCH v6 5/8] fsl-dma: change release process of dma descriptor for supporting async_tx   Liu Qiang-B32616
    • [PATCH v6 5/8] fsl-dma: change release process of dma descriptor for supporting async_tx   Liu Qiang-B32616
• [PATCH 6/8] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   qiang.liu at freescale.com
  • [PATCH 6/8] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   Liu Qiang-B32616
• [PATCH v6 7/8] fsl-dma: fix a warning of unitialized cookie   qiang.liu at freescale.com
• [PATCH v6 8/8] carma: remove unnecessary DMA_INTERRUPT capability   qiang.liu at freescale.com
• [PATCH v6 6/8] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   qiang.liu at freescale.com
  • [PATCH v6 6/8] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   Arnd Bergmann
    • [PATCH v6 6/8] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   Liu Qiang-B32616
• [PATCH 3/3 v4] powerpc/mpic: FSL MPIC error interrupt support.   Varun Sethi
  • [PATCH 3/3 v4] powerpc/mpic: FSL MPIC error interrupt support.   Kumar Gala
    • [PATCH 3/3 v4] powerpc/mpic: FSL MPIC error interrupt support.   Sethi Varun-B16395
      • [PATCH 3/3 v4] powerpc/mpic: FSL MPIC error interrupt support.   Scott Wood
      • [PATCH 3/3 v4] powerpc/mpic: FSL MPIC error interrupt support.   Sethi Varun-B16395
• [PATCH 0/6] powerpc/booke64: add core support for KVM   Mihai Caraman
  • [PATCH 1/6] powerpc/booke64: fix machine check handler to use the right prolog   Mihai Caraman
  • [PATCH 2/6] powerpc/booke64: use GSRR registers in Guest Doorbell interrupts   Mihai Caraman
  • [PATCH 3/6] powerpc/booke64: add DO_KVM kernel hooks   Mihai Caraman
  • [PATCH 4/6] powerpc/booke64: remove mfspr srr1 duplicate in exception prolog   Mihai Caraman
  • [PATCH 5/6] powerpc/booke64: use SPRG0/3 scratch for bolted TLB miss & crit int   Mihai Caraman
  • [PATCH 6/6] powerpc/booke64: restore VDSO information on critical exception   Mihai Caraman
• [v2 PATCH 1/1] booke/wdt: some ioctls do not return values properly   Tiejun Chen
  • [v2 PATCH 1/1] booke/wdt: some ioctls do not return values properly   Tabi Timur-B04825
  • [v2 PATCH 1/1] booke/wdt: some ioctls do not return values properly   Kumar Gala
• [PATCH v2] PCI: use dev->irq instead of dev->pin to enable non MSI/INTx interrupt   Zang Roy-R61911
• [PATCH 1/4] powerpc/85xx: add sleep and deep sleep support   Zhao Chenhui
  • [PATCH 2/4] fsl_pmc: Add API to enable device as wakeup event source   Zhao Chenhui
    • [PATCH 2/4] fsl_pmc: Add API to enable device as wakeup event source   Tabi Timur-B04825
      • [PATCH 2/4] fsl_pmc: Add API to enable device as wakeup event source   Zhao Chenhui
      • [PATCH 2/4] fsl_pmc: Add API to enable device as wakeup event source   Zhao Chenhui
      • [PATCH 2/4] fsl_pmc: Add API to enable device as wakeup event source   Tabi Timur-B04825
  • [PATCH 3/4] cpu: export cpu hotplug disable/enable functions as global functions   Zhao Chenhui
    • [PATCH 3/4] cpu: export cpu hotplug disable/enable functions as global functions   Kumar Gala
      • [PATCH 3/4] cpu: export cpu hotplug disable/enable functions as global functions   Srivatsa S. Bhat
      • [PATCH 3/4] cpu: export cpu hotplug disable/enable functions as global functions   Zhao Chenhui
    • [PATCH 3/4] cpu: export cpu hotplug disable/enable functions as global functions   Zhao Chenhui
  • [PATCH 4/4] powerpc/85xx: add support to JOG feature using cpufreq interface   Zhao Chenhui
• [PATCH] mpc85xx_defconfig: add VIA PATA support for MPC85xxCDS   Zhao Chenhui
  • [PATCH] mpc85xx_defconfig: add VIA PATA support for MPC85xxCDS   Kumar Gala
• [PATCH 0/3] tpm: Add new vTPM device driver for PPC64   Ashley Lai
  • [PATCH 1/3] drivers/char/tpm: Add new device driver to support IBM vTPM   Ashley Lai
  • [PATCH 2/3] PPC64: Add support for instantiating SML from Open Firmware   Ashley Lai
  • [PATCH 3/3] drivers/char/tpm: Add securityfs support for event log   Ashley Lai
    • [PATCH 3/3] drivers/char/tpm: Add securityfs support for event log   Kent Yoder
      • [PATCH 3/3] drivers/char/tpm: Add securityfs support for event log   Ashley D Lai
    • [PATCH 3/3] drivers/char/tpm: Add securityfs support for event log   Ashley Lai
• [PATCH 39/41] TTY: hvc_console, add tty install   Jiri Slaby
• [PATCH 41/41] TTY: hvcs, add tty install   Jiri Slaby
• [PATCH v3 3/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• Endianness of multi-bit 'gpios' property?   Timur Tabi
• [PATCH] Use pmc_overflow() to detect rolled back events   Sukadev Bhattiprolu
• [PATCH 1/2] powerpc: POWER7 copy_to_user/copy_from_user patch applied twice   Anton Blanchard
  • [PATCH 2/2] powerpc: Fix VMX in interrupt check in POWER7 copy loops   Anton Blanchard
• [PATCH 3/3 v5] powerpc/mpic: FSL MPIC error interrupt support.   Varun Sethi
  • [PATCH 3/3 v5] powerpc/mpic: FSL MPIC error interrupt support.   Kumar Gala
• [PATCH 1/3] powerpc/e500v2: Add power isa properties to comply with ePAPR 1.1   Olivia Yin
  • [PATCH 2/3] powerpc/e500mc: Add power isa properties to comply with ePAPR 1.1   Olivia Yin
  • [PATCH 3/3] powerpc/e5500: Add power isa properties to comply with ePAPR 1.1   Olivia Yin
  • [PATCH 1/3] powerpc/e500v2: Add power isa properties to comply with ePAPR 1.1   Tabi Timur-B04825
• [PATCH] powerpc/44x: Support OCM(On Chip Memory) for APM821xx SoC and Bluestone board   Josh Boyer
• [PATCH 1/3, v2] powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1   Olivia Yin
  • [PATCH 2/3, v2] powerpc/e500mc: Add Power ISA properties to comply with ePAPR 1.1   Olivia Yin
    • [PATCH 3/3, v2] powerpc/e5500: Add Power ISA properties to comply with ePAPR 1.1   Olivia Yin
      • [PATCH 3/3, v2] powerpc/e5500: Add Power ISA properties to comply with ePAPR 1.1   Kumar Gala
    • [PATCH 2/3, v2] powerpc/e500mc: Add Power ISA properties to comply with ePAPR 1.1   Kumar Gala
  • [PATCH 1/3, v2] powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1   Kumar Gala
  • [PATCH 1/3, v2] powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1   Kumar Gala
• [PATCH v7 0/8] Raid: enable talitos xor offload for improving performance   qiang.liu at freescale.com
  • [PATCH v7 0/8] Raid: enable talitos xor offload for improving performance   Ira W. Snyder
    • [PATCH v7 0/8] Raid: enable talitos xor offload for improving performance   Liu Qiang-B32616
      • [PATCH v7 0/8] Raid: enable talitos xor offload for improving performance   Dan Williams
      • [PATCH v7 0/8] Raid: enable talitos xor offload for improving performance   Liu Qiang-B32616
      • [PATCH v7 0/8] Raid: enable talitos xor offload for improving performance   Liu Qiang-B32616
      • [PATCH v7 0/8] Raid: enable talitos xor offload for improving performance   Dan Williams
      • [PATCH v7 0/8] Raid: enable talitos xor offload for improving performance   Liu Qiang-B32616
• [PATCH v7 1/8] Talitos: Support for async_tx XOR offload   qiang.liu at freescale.com
  • [PATCH v7 1/8] Talitos: Support for async_tx XOR offload   Geanta Neag Horia Ioan-B05471
    • [PATCH v7 1/8] Talitos: Support for async_tx XOR offload   Liu Qiang-B32616
      • [PATCH v7 1/8] Talitos: Support for async_tx XOR offload   Geanta Neag Horia Ioan-B05471
      • [PATCH v7 1/8] Talitos: Support for async_tx XOR offload   Liu Qiang-B32616
• [PATCH v7 2/8] fsl-dma: remove attribute DMA_INTERRUPT of dmaengine   qiang.liu at freescale.com
• [PATCH v7 3/8] fsl-dma: add fsl_dma_free_descriptor() to reduce code duplication   qiang.liu at freescale.com
• [PATCH v7 4/8] fsl-dma: move functions to avoid forward declarations   qiang.liu at freescale.com
• [PATCH v7 5/8] fsl-dma: change release process of dma descriptor for supporting async_tx   qiang.liu at freescale.com
• [PATCH v7 6/8] fsl-dma: use spin_lock_bh to instead of spin_lock_irqsave   qiang.liu at freescale.com
• [PATCH v7 7/8] fsl-dma: fix a warning of unitialized cookie   qiang.liu at freescale.com
• [PATCH v7 8/8] carma: remove unnecessary DMA_INTERRUPT capability   qiang.liu at freescale.com
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
  • [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
  • [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
    • [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
      • [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
      • [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Ian Molton
      • [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [PATCH v2 0/6] Avoid cache trashing on clearing huge/gigantic page   Kirill A. Shutemov
  • [PATCH v2 1/6] THP: Use real address for NUMA policy   Kirill A. Shutemov
  • [PATCH v2 2/6] mm: make clear_huge_page tolerate non aligned address   Kirill A. Shutemov
  • [PATCH v2 3/6] THP: Pass real, not rounded, address to clear_huge_page   Kirill A. Shutemov
  • [PATCH v2 4/6] x86: Add clear_page_nocache   Kirill A. Shutemov
    • [PATCH v2 4/6] x86: Add clear_page_nocache   Jan Beulich
      • [PATCH v2 4/6] x86: Add clear_page_nocache   Kirill A. Shutemov
      • [PATCH v2 4/6] x86: Add clear_page_nocache   Jan Beulich
      • [PATCH v2 4/6] x86: Add clear_page_nocache   Andi Kleen
      • [PATCH v2 4/6] x86: Add clear_page_nocache   Borislav Petkov
      • [PATCH v2 4/6] x86: Add clear_page_nocache   Kirill A. Shutemov
    • [PATCH v2 4/6] x86: Add clear_page_nocache   H. Peter Anvin
  • [PATCH v2 5/6] mm: make clear_huge_page cache clear only around the fault address   Kirill A. Shutemov
  • [PATCH v2 6/6] x86: switch the 64bit uncached page clear to SSE/AVX v2   Kirill A. Shutemov
    • [PATCH v2 6/6] x86: switch the 64bit uncached page clear to SSE/AVX v2   Jan Beulich
• [PATCH V2 0/3] tpm: Add new vTPM device driver for PPC64   Ashley Lai
  • [PATCH V2 1/3] drivers/char/tpm: Add new device driver to support IBM vTPM   Ashley Lai
  • [PATCH V2 2/3] PPC64: Add support for instantiating SML from Open Firmware   Ashley Lai
  • [PATCH V2 3/3] drivers/char/tpm: Add securityfs support for event log   Ashley Lai
    • [PATCH V2 3/3] drivers/char/tpm: Add securityfs support for event log   Michael Ellerman
      • [PATCH V2 3/3] drivers/char/tpm: Add securityfs support for event log   Ashley Lai
• [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Dongsheng.wang at freescale.com
  • [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Gala Kumar-B11780
    • [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Wang Dongsheng-B40534
  • [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Scott Wood
    • [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Wang Dongsheng-B40534
      • [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Scott Wood
      • [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Wang Dongsheng-B40534
      • [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Scott Wood
      • [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Wang Dongsheng-B40534
• [PATCH v2 2/2] powerpc/mpic: add global timer support   Dongsheng.wang at freescale.com
  • [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
    • [PATCH v2 2/2] powerpc/mpic: add global timer support   Gala Kumar-B11780
    • [PATCH v2 2/2] powerpc/mpic: add global timer support   Wang Dongsheng-B40534
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Li Yang-R58472
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Wang Dongsheng-B40534
  • [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
    • [PATCH v2 2/2] powerpc/mpic: add global timer support   Wang Dongsheng-B40534
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Wang Dongsheng-B40534
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Wang Dongsheng-B40534
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Wang Dongsheng-B40534
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
  • [PATCH v2 2/2] powerpc/mpic: add global timer support   Tabi Timur-B04825
    • [PATCH v2 2/2] powerpc/mpic: add global timer support   Wang Dongsheng-B40534
      • [PATCH v2 2/2] powerpc/mpic: add global timer support   Wang Dongsheng-B40534
• [-next] ERROR: "epapr_hypercall_start" [drivers/tty/ehv_bytechan.ko] undefined!   Geert Uytterhoeven
  • [-next] ERROR: "epapr_hypercall_start" [drivers/tty/ehv_bytechan.ko] undefined!   Michael Ellerman
    • [-next] ERROR: "epapr_hypercall_start" [drivers/tty/ehv_bytechan.ko] undefined!   Michael Ellerman
      • [-next] ERROR: "epapr_hypercall_start" [drivers/tty/ehv_bytechan.ko] undefined!   Scott Wood
      • [-next] ERROR: "epapr_hypercall_start" [drivers/tty/ehv_bytechan.ko] undefined!   Michael Ellerman
• [PATCH V6 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
  • [PATCH V6 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Kumar Gala
  • [PATCH V6 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Kumar Gala
  • [PATCH V6 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Tabi Timur-B04825
    • [PATCH V6 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V6 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Tabi Timur-B04825
• [PATCH v2 4/4] powerpc/85xx: add support to JOG feature using cpufreq interface   Zhao Chenhui
• [PATCH 1/2] powerpc/p4080ds: dts - add usb controller version info and port0   Shengzhou Liu
  • [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Shengzhou Liu
    • [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Kumar Gala
      • [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Liu Shengzhou-B36685
      • [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Kumar Gala
      • [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Alan Stern
    • [PATCH 2/2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Tabi Timur-B04825
  • [PATCH 1/2] powerpc/p4080ds: dts - add usb controller version info and port0   Kumar Gala
• [PATCH] powerpc/epapr: export epapr_hypercall_start   Scott Wood
  • [PATCH] powerpc/epapr: export epapr_hypercall_start   Geert Uytterhoeven
    • [PATCH] powerpc/epapr: export epapr_hypercall_start   Tabi Timur-B04825
      • [PATCH] powerpc/epapr: export epapr_hypercall_start   Scott Wood
  • [PATCH] powerpc/epapr: export epapr_hypercall_start   Alexander Graf
• [PATCH v3 1/2] mmc: Move mmc_delay() to include/linux/mmc/core.h   Chunhe Lan
  • [PATCH v3 1/2] mmc: Move mmc_delay() to include/linux/mmc/core.h   Arnd Bergmann
• [PATCH v3 2/2] mmc: Use mmc_delay() instead of mdelay() for time delay   Chunhe Lan
• [PATCH 1/2] powerpc/85xx: add the Fman device tree template include files   Timur Tabi
  • [PATCH 1/2] powerpc/85xx: add the Fman device tree template include files   Scott Wood
    • [PATCH 1/2] powerpc/85xx: add the Fman device tree template include files   Timur Tabi
• [PATCH 2/2] powerpc/85xx: add Fman MDIO muxing support to the P4080DS   Timur Tabi
  • [PATCH 2/2] powerpc/85xx: add Fman MDIO muxing support to the P4080DS   Kumar Gala
    • [PATCH 2/2] powerpc/85xx: add Fman MDIO muxing support to the P4080DS   Timur Tabi
      • [PATCH 2/2] powerpc/85xx: add Fman MDIO muxing support to the P4080DS   Scott Wood
      • [PATCH 2/2] powerpc/85xx: add Fman MDIO muxing support to the P4080DS   Timur Tabi
      • [PATCH 2/2] powerpc/85xx: add Fman MDIO muxing support to the P4080DS   Scott Wood
      • [PATCH 2/2] powerpc/85xx: add Fman MDIO muxing support to the P4080DS   Timur Tabi
      • [PATCH 2/2] powerpc/85xx: add Fman MDIO muxing support to the P4080DS   Scott Wood
• [PATCH] [RESEND] powerpc: fix personality handling in ppc64_personality()   Jiri Kosina
• [PATCH 3/5] drivers/net/ethernet/freescale/fs_enet: fix error return code   Julia Lawall
  • [PATCH 3/5] drivers/net/ethernet/freescale/fs_enet: fix error return code   David Miller
• [PATCH] Powerpc 8xx CPM_UART desynchronisation   Christophe Leroy
• [PATCH] Powerpc 8xx CPM_UART delay in receive   Alan Cox
  • [PATCH] Powerpc 8xx CPM_UART delay in receive   Christophe Leroy
  • [PATCH] Powerpc 8xx CPM_UART delay in receive   leroy christophe
    • [PATCH] Powerpc 8xx CPM_UART delay in receive   Alan Cox
      • [PATCH] Powerpc 8xx CPM_UART delay in receive   leroy christophe
      • [PATCH] Powerpc 8xx CPM_UART delay in receive   Alan Cox
• [PATCH 5/5] arch/powerpc/platforms/powernv/pci.c: Remove potential NULL dereferences   Julia Lawall
• [PATCH V3 0/3] tpm: Add new vTPM device driver for PPC64   Ashley Lai
  • [PATCH V3 1/3] drivers/char/tpm: Add new device driver to support IBM vTPM   Ashley Lai
    • [PATCH V3 1/3] drivers/char/tpm: Add new device driver to support IBM vTPM   Ashley Lai
      • [PATCH V3 1/3] drivers/char/tpm: Add new device driver to support IBM vTPM   Kent Yoder
  • [PATCH V3 2/3] PPC64: Add support for instantiating SML from Open Firmware   Ashley Lai
  • [PATCH V3 3/3] drivers/char/tpm: Add securityfs support for event log   Ashley Lai
  • [PATCH V3 0/3] tpm: Add new vTPM device driver for PPC64   Kent Yoder
• [PATCH V7 0/3] PCI unification patch description   Jia Hongtao
  • [PATCH V7 1/3] powerpc/pci: Make sure ISA IO base is not zero   Jia Hongtao
    • [PATCH V7 1/3] powerpc/pci: Make sure ISA IO base is not zero   Scott Wood
      • [PATCH V7 1/3] powerpc/pci: Make sure ISA IO base is not zero   Benjamin Herrenschmidt
      • [PATCH V7 1/3] powerpc/pci: Make sure ISA IO base is not zero   Scott Wood
      • [PATCH V7 1/3] powerpc/pci: Make sure ISA IO base is not zero   Benjamin Herrenschmidt
      • [PATCH V7 1/3] powerpc/pci: Make sure ISA IO base is not zero   Jia Hongtao-B38951
      • [PATCH V7 1/3] powerpc/pci: Make sure ISA IO base is not zero   Jia Hongtao-B38951
  • [PATCH V7 2/3] powerpc/ge_imp3a: Add ISA node to PCI primary bus   Jia Hongtao
    • [PATCH V7 2/3] powerpc/ge_imp3a: Add ISA node to PCI primary bus   Scott Wood
      • [PATCH V7 2/3] powerpc/ge_imp3a: Add ISA node to PCI primary bus   Kumar Gala
      • [PATCH V7 2/3] powerpc/ge_imp3a: Add ISA node to PCI primary bus   Scott Wood
  • [PATCH V7 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
    • [PATCH V7 3/3] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
• [PATCH] kconfig: remove CONFIG_MTD_NAND_VERIFY_WRITE   Huang Shijie
  • [PATCH] kconfig: remove CONFIG_MTD_NAND_VERIFY_WRITE   Artem Bityutskiy
• [PATCH] powerpc:Update Integrated Flash controller device tree bindings   Prabhakar Kushwaha
  • [PATCH] powerpc:Update Integrated Flash controller device tree bindings   Kumar Gala
• [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Oleg Nesterov
  • [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Benjamin Herrenschmidt
    • [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Ananth N Mavinakayanahalli
      • [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Oleg Nesterov
      • [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Ananth N Mavinakayanahalli
      • [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Oleg Nesterov
      • [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Ananth N Mavinakayanahalli
      • [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Oleg Nesterov
      • [PATCH v3 2/2] powerpc: Uprobes port to powerpc   Ananth N Mavinakayanahalli
• [PATCH] rapidio/tsi721: fix inbound doorbell interrupt handling   Alexandre Bounine
• [PATCH] rapidio/tsi721: fix unused variable compiler warning   Alexandre Bounine
  • GE IMP3a   Kumar Gala
    • GE IMP3a   Martyn Welch
    • GE IMP3a   Kumar Gala
    • GE IMP3a   Martyn Welch
• therm_pm72 units, interface   Benjamin Herrenschmidt
  • therm_pm72 units, interface   Jan Engelhardt
  • therm_pm72 units, interface   Benjamin Herrenschmidt
  • therm_pm72 units, interface   Jan Engelhardt
    • therm_pm72 units, interface   Benjamin Herrenschmidt
      • therm_pm72 units, interface   Jan Engelhardt
      • therm_pm72 units, interface   Benjamin Herrenschmidt
      • therm_pm72 units, interface   Jan Engelhardt
• [PATCH] powerpc/mpc85xx:Add new ext fields to Integrated FLash Controller   Prabhakar Kushwaha
  • [PATCH] powerpc/mpc85xx:Add new ext fields to Integrated FLash Controller   Kumar Gala
• powerpc/perf: hw breakpoints return ENOSPC   Michael Neuling
  • powerpc/perf: hw breakpoints return ENOSPC   Peter Zijlstra
    • powerpc/perf: hw breakpoints return ENOSPC   Michael Neuling
      • powerpc/perf: hw breakpoints return ENOSPC   Peter Zijlstra
      • powerpc/perf: hw breakpoints return ENOSPC   Michael Ellerman
      • powerpc/perf: hw breakpoints return ENOSPC   Peter Zijlstra
      • powerpc/perf: hw breakpoints return ENOSPC   Michael Ellerman
      • powerpc/perf: hw breakpoints return ENOSPC   Michael Neuling
  • powerpc/perf: hw breakpoints return ENOSPC   Frederic Weisbecker
    • powerpc/perf: hw breakpoints return ENOSPC   Michael Neuling
• [PATCH v3 0/7] Avoid cache trashing on clearing huge/gigantic page   Kirill A. Shutemov
  • [PATCH v3 2/7] THP: Pass fault address to __do_huge_pmd_anonymous_page()   Kirill A. Shutemov
  • [PATCH v3 3/7] hugetlb: pass fault address to hugetlb_no_page()   Kirill A. Shutemov
  • [PATCH v3 5/7] x86: Add clear_page_nocache   Kirill A. Shutemov
  • [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address   Kirill A. Shutemov
    • [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address   Andrea Arcangeli
      • [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address   Kirill A. Shutemov
      • [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address   Andrea Arcangeli
      • [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address   Kirill A. Shutemov
      • [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address   Andrea Arcangeli
• [PATCH v3 1/7] THP: Use real address for NUMA policy   Kirill A. Shutemov
• [PATCH v3 4/7] mm: pass fault address to clear_huge_page()   Kirill A. Shutemov
• [PATCH v3 7/7] x86: switch the 64bit uncached page clear to SSE/AVX v2   Kirill A. Shutemov
• [PATCH] scsi/ibmvscsi: /sys/class/scsi_host/hostX/config doesn't show any information   Robert Jennings
• PPC64 & DMA zone   Aaro Koskinen
  • PPC64 & DMA zone   Benjamin Herrenschmidt
    • PPC64 & DMA zone   Aaro Koskinen
      • PPC64 & DMA zone   Benjamin Herrenschmidt
• [PATCH] powerpc: dma-iommu: fix IOMMU window check   Aaro Koskinen
• [PATCH 9/9] sound/ppc/snd_ps3.c: fix error return code   Julia Lawall
• [PATCH 4/8] time: Condense timekeeper.xtime into xtime_sec   Andreas Schwab
  • [PATCH 4/8] time: Condense timekeeper.xtime into xtime_sec   John Stultz
    • [PATCH 4/8] time: Condense timekeeper.xtime into xtime_sec   Andreas Schwab
      • [PATCH 4/8] time: Condense timekeeper.xtime into xtime_sec   John Stultz
      • [PATCH 4/8] time: Condense timekeeper.xtime into xtime_sec   Andreas Schwab
      • [PATCH 4/8] time: Condense timekeeper.xtime into xtime_sec   John Stultz
      • [PATCH 4/8] time: Condense timekeeper.xtime into xtime_sec   Andreas Schwab
      • [PATCH 4/8] time: Condense timekeeper.xtime into xtime_sec   John Stultz
• [PATCH] powerpc: Rename 64-bit PVR constants to PVR_foo   Michael Ellerman
• [RFC V7 PATCH 00/19] memory-hotplug: hot-remove physical memory   wency at cn.fujitsu.com
  • [RFC V7 PATCH 01/19] memory-hotplug: rename remove_memory() to offline_memory()/offline_pages()   wency at cn.fujitsu.com
  • [RFC V7 PATCH 02/19] memory-hotplug: implement offline_memory()   wency at cn.fujitsu.com
  • [RFC V7 PATCH 03/19] memory-hotplug: store the node id in acpi_memory_device   wency at cn.fujitsu.com
  • [RFC V7 PATCH 04/19] memory-hotplug: offline and remove memory when removing the memory device   wency at cn.fujitsu.com
  • [RFC V7 PATCH 07/19] memory-hotplug: call acpi_bus_remove() to remove memory device   wency at cn.fujitsu.com
  • [RFC V7 PATCH 08/19] memory-hotplug: remove /sys/firmware/memmap/X sysfs   wency at cn.fujitsu.com
  • [RFC V7 PATCH 09/19] memory-hotplug: does not release memory region in PAGES_PER_SECTION chunks   wency at cn.fujitsu.com
  • [RFC V7 PATCH 10/19] memory-hotplug: add memory_block_release   wency at cn.fujitsu.com
  • [RFC V7 PATCH 11/19] memory-hotplug: remove_memory calls __remove_pages   wency at cn.fujitsu.com
  • [RFC V7 PATCH 12/19] memory-hotplug: introduce new function arch_remove_memory()   wency at cn.fujitsu.com
  • [RFC V7 PATCH 13/19] memory-hotplug: check page type in get_page_bootmem   wency at cn.fujitsu.com
  • [RFC V7 PATCH 14/19] memory-hotplug: move register_page_bootmem_info_node and put_page_bootmem for sparse-vmemmap   wency at cn.fujitsu.com
  • [RFC V7 PATCH 15/19] memory-hotplug: implement register_page_bootmem_info_section of sparse-vmemmap   wency at cn.fujitsu.com
  • [RFC V7 PATCH 16/19] memory-hotplug: free memmap of sparse-vmemmap   wency at cn.fujitsu.com
  • [RFC V7 PATCH 17/19] memory_hotplug: clear zone when the memory is removed   wency at cn.fujitsu.com
  • [RFC V7 PATCH 18/19] memory-hotplug: add node_device_release   wency at cn.fujitsu.com
    • [RFC V7 PATCH 18/19] memory-hotplug: add node_device_release   Jianguo Wu
  • [RFC V7 PATCH 19/19] memory-hotplug: remove sysfs file of node   wency at cn.fujitsu.com
• [RFC V7 PATCH 05/19] memory-hotplug: check whether memory is present or not   wency at cn.fujitsu.com
• [RFC V7 PATCH 06/19] memory-hotplug: export the function acpi_bus_remove()   wency at cn.fujitsu.com
• [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
  • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
    • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Li Yang-R58472
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Li Yang-R58472
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
      • [PATCH V8] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
• myri10ge in p4080ds ppc   leonid
• [PATCH V4 0/8] Rework on PowerNV P7IOC initialization   Gavin Shan
  • [PATCH 1/8] ppc/pnv: create bus sensitive PEs   Gavin Shan
  • [PATCH 2/8] ppc/pnv: PE list based on creation order   Gavin Shan
  • [PATCH 3/8] ppc/pnv: I/O and MMIO resource assignment for PEs   Gavin Shan
  • [PATCH 4/8] ppc/pnv: initialize DMA for PEs   Gavin Shan
  • [PATCH 5/8] ppc/pnv: skip check on PE if necessary   Gavin Shan
  • [PATCH 7/8] ppc/pnv: using PCI core to do resource assignment   Gavin Shan
  • [PATCH 8/8] ppc/pnv: remove unused functions   Gavin Shan
• [PATCH 6/8] ppc/pnv: fix overrunning segment tracing array   Gavin Shan
• [PATCH v4 0/8] Avoid cache trashing on clearing huge/gigantic page   Kirill A. Shutemov
  • [PATCH v4 1/8] THP: Use real address for NUMA policy   Kirill A. Shutemov
  • [PATCH v4 2/8] THP: Pass fault address to __do_huge_pmd_anonymous_page()   Kirill A. Shutemov
  • [PATCH v4 3/8] hugetlb: pass fault address to hugetlb_no_page()   Kirill A. Shutemov
  • [PATCH v4 4/8] mm: pass fault address to clear_huge_page()   Kirill A. Shutemov
  • [PATCH v4 5/8] x86: Add clear_page_nocache   Kirill A. Shutemov
  • [PATCH v4 6/8] mm: make clear_huge_page cache clear only around the fault address   Kirill A. Shutemov
  • [PATCH v4 7/8] x86: switch the 64bit uncached page clear to SSE/AVX v2   Kirill A. Shutemov
  • [PATCH v4 8/8] mm: implement vm.clear_huge_page_nocache sysctl   Kirill A. Shutemov
• [PATCH v2 0/2][powerpc] Export memory_limit via device tree   Suzuki K. Poulose
  • [PATCH v2 1/2] [powerpc] Change memory_limit from phys_addr_t to unsigned long long   Suzuki K. Poulose
  • [PATCH v2 2/2] [powerpc] Export memory limit via device tree   Suzuki K. Poulose
• [PATCH] rapidio/tsi721: modify mport name assignment   Alexandre Bounine
  • [PATCH] rapidio/tsi721: modify mport name assignment   Andrew Morton
    • [PATCH] rapidio/tsi721: modify mport name assignment   Bounine, Alexandre
• [PATCH] rapidio: apply RX/TX enable to active switch ports only   Alexandre Bounine
  • [PATCH] rapidio: apply RX/TX enable to active switch ports only   Andrew Morton
    • [PATCH] rapidio: apply RX/TX enable to active switch ports only   Bounine, Alexandre
• [PATCH] powerpc/mm: match variable types to API   Paul Gortmaker
  • [PATCH] powerpc/mm: match variable types to API   Paul Mackerras
• [PATCH] powerpc/fsl: fix "Failed to mount /dev: No such device" errors   Kim Phillips
  • [PATCH] powerpc/fsl: fix "Failed to mount /dev: No such device" errors   Kumar Gala
    • [PATCH 1/2] powerpc/fsl: update defconfigs   Kim Phillips
      • [PATCH 1/2] powerpc/fsl: update defconfigs   Kumar Gala
    • [PATCH 2/2 v2] powerpc/fsl: fix "Failed to mount /dev: No such device" errors   Kim Phillips
      • [PATCH 2/2 v2] powerpc/fsl: fix "Failed to mount /dev: No such device" errors   Kumar Gala
• [PATCH] DMA/RaidEngine: Enable FSL RaidEngine   b29237 at freescale.com
  • [PATCH] DMA/RaidEngine: Enable FSL RaidEngine   Kumar Gala
• [PATCH] RAID/DMA/caamxor: support XOR offload by CAAM   b29237 at freescale.com
• [PATCH 0/2] powerpc: perf hardware breakpoint fixes   Michael Neuling
  • [PATCH] powerpc: Remove unnecessary ifdefs   Michael Neuling
  • [PATCH] powerpc: Fix null pointer deref in perf hardware breakpoints   Michael Neuling
    • [PATCH] powerpc: Fix null pointer deref in perf hardware breakpoints   Michael Neuling
• [PATCH 1/2] powerpc: Add trap_nr to thread_struct   Ananth N Mavinakayanahalli
  • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Ananth N Mavinakayanahalli
    • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Oleg Nesterov
    • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Michael Ellerman
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Srikar Dronamraju
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Benjamin Herrenschmidt
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Oleg Nesterov
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Srikar Dronamraju
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Srikar Dronamraju
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Benjamin Herrenschmidt
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Michael Ellerman
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Ananth N Mavinakayanahalli
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Michael Ellerman
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Benjamin Herrenschmidt
      • [PATCH v4 2/2] powerpc: Uprobes port to powerpc   Ananth N Mavinakayanahalli
• [PATCH v2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock   Shengzhou Liu
• [PATCH 1/3] kgdb,ppc: do not set kgdb_single_step on ppc   Tiejun Chen
  • [PATCH 2/3] powerpc: Bail out of KGDB when we've been triggered   Tiejun Chen
    • [PATCH 2/3] powerpc: Bail out of KGDB when we've been triggered   Tabi Timur-B04825
      • [PATCH 2/3] powerpc: Bail out of KGDB when we've been triggered   tiejun.chen
• [PATCH 3/3] powerpc/kgdb: restore current_thread_info properly   Tiejun Chen
• [PATCH] powerpc/mpic_msgr: add missing includes   Scott Wood
• [v2][PATCH 1/3] kgdb,ppc: do not set kgdb_single_step on ppc   Tiejun Chen
  • [v2][PATCH 3/3] powerpc/kgdb: restore current_thread_info properly   Tiejun Chen
    • [v2][PATCH 3/3] powerpc/kgdb: restore current_thread_info properly   Nicholas A. Bellinger
      • [v2][PATCH 3/3] powerpc/kgdb: restore current_thread_info properly   tiejun.chen
• [v2][PATCH 2/3] powerpc: Bail out of KGDB when we've been triggered   Tiejun Chen
• [PATCH] QE USB host fix for mpc832x   Ben Dubb
• [PATCH 1/2] PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too   Olof Johansson
  • [PATCH 1/2] PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too   Bjorn Helgaas
    • [PATCH 1/2] PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too   Olof Johansson
• [PATCH V9] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
  • [PATCH V9] powerpc/fsl-pci: Unify pci/pcie initialization code   Scott Wood
    • [PATCH V9] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
• [PATCH] powerpc: dts: 52xx: drop critical IRQ from dts files   Wolfram Sang
  • [PATCH] powerpc: dts: 52xx: drop critical IRQ from dts files   Grant Likely
    • [PATCH] powerpc: dts: 52xx: drop critical IRQ from dts files   Wolfram Sang
• Build regressions/improvements in v3.6-rc3   Geert Uytterhoeven
• [PATCH 1/3] powerpc: Consolidate *probe definitions   Ananth N Mavinakayanahalli
  • [PATCH 2/3] powerpc: Add trap_nr to thread_struct   Ananth N Mavinakayanahalli
  • [PATCH v5 3/3] powerpc: Uprobes port to powerpc   Ananth N Mavinakayanahalli
• [PATCH 1/2] powerpc: Fix xmon dl command for new printk implementation   Michael Ellerman
  • [PATCH 2/2] powerpc: Fixup whitespace in xmon   Michael Ellerman
• [PATCH][v2] powerpc/mm: using two zones for freescale 64 bit kernel   Shaohui Xie
  • [PATCH][v2] powerpc/mm: using two zones for freescale 64 bit kernel   Kumar Gala
• [PATCH 1/2] powerpc/mpc5200: add dts files for ifm camera machines   Anatolij Gustschin
  • [PATCH v2 1/2] powerpc/mpc5200: add dts files for ifm camera machines   Anatolij Gustschin
• [PATCH 2/2] dt/misc: add bindings documentation for ifm camera sensor interface   Anatolij Gustschin
• [PATCH] powerpc: Make sure IPI handlers see data written by IPI senders   Paul Mackerras
  • [PATCH] powerpc: Make sure IPI handlers see data written by IPI senders   Paul E. McKenney
• [PATCH 1/6] i2c: cpm: use devm_ functions   Julia Lawall
• [PATCH] powerpc: add adt7461 thermal monitor support to applicable boards   Jia Hongtao
  • [PATCH] powerpc: add adt7461 thermal monitor support to applicable boards   Kumar Gala
• [PATCH V10] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao
  • [PATCH V10] powerpc/fsl-pci: Unify pci/pcie initialization code   Kumar Gala
    • [PATCH V10] powerpc/fsl-pci: Unify pci/pcie initialization code   Jia Hongtao-B38951
• [RFC v8 PATCH 00/20] memory-hotplug: hot-remove physical memory   wency at cn.fujitsu.com
  • [RFC v8 PATCH 02/20] memory-hotplug: implement offline_memory()   wency at cn.fujitsu.com
  • [RFC v8 PATCH 04/20] memory-hotplug: offline and remove memory when removing the memory device   wency at cn.fujitsu.com
  • [RFC v8 PATCH 12/20] memory-hotplug: introduce new function arch_remove_memory()   wency at cn.fujitsu.com
  • [RFC v8 PATCH 15/20] memory-hotplug: implement register_page_bootmem_info_section of sparse-vmemmap   wency at cn.fujitsu.com
  • [RFC v8 PATCH 16/20] memory-hotplug: free memmap of sparse-vmemmap   wency at cn.fujitsu.com
  • [RFC v8 PATCH 17/20] memory_hotplug: clear zone when the memory is removed   wency at cn.fujitsu.com
• [RFC v8 PATCH 01/20] memory-hotplug: rename remove_memory() to offline_memory()/offline_pages()   wency at cn.fujitsu.com
• [RFC v8 PATCH 03/20] memory-hotplug: store the node id in acpi_memory_device   wency at cn.fujitsu.com
• [RFC v8 PATCH 05/20] memory-hotplug: check whether memory is present or not   wency at cn.fujitsu.com
• [RFC v8 PATCH 06/20] memory-hotplug: export the function acpi_bus_remove()   wency at cn.fujitsu.com
• [RFC v8 PATCH 07/20] memory-hotplug: call acpi_bus_remove() to remove memory device   wency at cn.fujitsu.com
• [RFC v8 PATCH 08/20] memory-hotplug: remove /sys/firmware/memmap/X sysfs   wency at cn.fujitsu.com
• [RFC v8 PATCH 09/20] memory-hotplug: does not release memory region in PAGES_PER_SECTION chunks   wency at cn.fujitsu.com
• [RFC v8 PATCH 10/20] memory-hotplug: add memory_block_release   wency at cn.fujitsu.com
• [RFC v8 PATCH 11/20] memory-hotplug: remove_memory calls __remove_pages   wency at cn.fujitsu.com
• [RFC v8 PATCH 13/20] memory-hotplug: check page type in get_page_bootmem   wency at cn.fujitsu.com
• [RFC v8 PATCH 14/20] memory-hotplug: move register_page_bootmem_info_node and put_page_bootmem for sparse-vmemmap   wency at cn.fujitsu.com
• [RFC v8 PATCH 18/20] memory-hotplug: add node_device_release   wency at cn.fujitsu.com
• [RFC v8 PATCH 19/20] memory-hotplug: remove sysfs file of node   wency at cn.fujitsu.com
• [RFC v8 PATCH 20/20] memory-hotplug: clear hwpoisoned flag when onlining pages   wency at cn.fujitsu.com
• [PATCH] clk: Make the generic clock API available by default   Mark Brown
  • [PATCH] clk: Make the generic clock API available by default   Hans-Christian Egtvedt
  • [PATCH] clk: Make the generic clock API available by default   Stephen Warren
    • [PATCH] clk: Make the generic clock API available by default   Mark Brown
      • [PATCH] clk: Make the generic clock API available by default   Stephen Warren
• [PATCH] powerpc/8544ds: add partition table for norflash   Dongsheng.wang at freescale.com
  • [PATCH] powerpc/8544ds: add partition table for norflash   Kumar Gala
• The MAX high_addr for `mmap` on PPC64   madper
  • The MAX high_addr for `mmap` on PPC64   David Gibson
    • The MAX high_addr for `mmap` on PPC64   madper
      • The MAX high_addr for `mmap` on PPC64   David Gibson
• [PATCH] powerpc/mpc52xx_lpbfifo: optionally defer fifo transfer start   Anatolij Gustschin
• [PATCH] i2c-mpc: Wait for STOP to hit the bus   Joakim Tjernlund
• Moving target   Guillaume Dargaud
  • Moving target   Andreas Schwab
  • Moving target   Michael Ellerman

Last message date: Fri Aug 31 20:41:08 EST 2012
Archived on: Fri Aug 31 20:41:22 EST 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...