[PATCH 1/2] PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too

Bjorn Helgaas bhelgaas at google.com
Fri Aug 24 04:02:13 EST 2012


On Thu, Aug 23, 2012 at 12:28:23AM -0700, Olof Johansson wrote:
> Hi,
> 
> On Mon, Jul 9, 2012 at 11:20 AM, Bjorn Helgaas <bhelgaas at google.com> wrote:
> > After 253d2e5498, we disable MEM and IO decoding for most devices while we
> > size 32-bit BARs.  However, we restore the original COMMAND register before
> > we size the upper 32 bits of 64-bit BARs, so we can still cause a conflict.
> >
> > This patch waits to restore the original COMMAND register until we're
> > completely finished sizing the BAR.
> >
> > Reference: https://lkml.org/lkml/2007/8/25/154
> > Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
> 
> This patch causes boot lockup on PA Semi hardware, since it disables
> the bar on the UART that is used for console, and it has printks
> between the old and the new re-enable location. If I boot with 'debug'
> level for printk, I hit this. If I boot with just regular console
> args, I don't.
> 
> I'm guessing any other platform that uses MMIO-based UART on PCI for
> console will have similar issues. I can verify on Chrome OS x86
> hardware tomorrow if legacy powerpc isn't important enough to care
> about. :-)
> 
> I have no proposal for a fix for this. Can you please consider
> reverting for 3.6 unless someone has a better idea?

Thanks a lot for finding and debugging this!

Can you try the patch below?


commit cfc29ece86d648e63fb46de81b2bf8e3e107672c
Author: Bjorn Helgaas <bhelgaas at google.com>
Date:   Thu Aug 23 10:53:08 2012 -0600

    PCI: Don't print anything while decoding is disabled
    
    If we try to print to the console device while its decoding is disabled,
    the system will hang.
    
    Reported-by: Olof Johansson <olof at lixom.net>
    Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6c143b4..9f8a6b7 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -144,15 +144,13 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
 	case PCI_BASE_ADDRESS_MEM_TYPE_32:
 		break;
 	case PCI_BASE_ADDRESS_MEM_TYPE_1M:
-		dev_info(&dev->dev, "1M mem BAR treated as 32-bit BAR\n");
+		/* 1M mem BAR treated as 32-bit BAR */
 		break;
 	case PCI_BASE_ADDRESS_MEM_TYPE_64:
 		flags |= IORESOURCE_MEM_64;
 		break;
 	default:
-		dev_warn(&dev->dev,
-			 "mem unknown type %x treated as 32-bit BAR\n",
-			 mem_type);
+		/* mem unknown type treated as 32-bit BAR */
 		break;
 	}
 	return flags;
@@ -173,9 +171,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	u32 l, sz, mask;
 	u16 orig_cmd;
 	struct pci_bus_region region;
+	bool bar_too_big = false, bar_disabled = false;
 
 	mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
 
+	/* No printks while decoding is disabled! */
 	if (!dev->mmio_always_on) {
 		pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
 		pci_write_config_word(dev, PCI_COMMAND,
@@ -240,8 +240,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			goto fail;
 
 		if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) {
-			dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n",
-				pos);
+			bar_too_big = true;
 			goto fail;
 		}
 
@@ -252,12 +251,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			region.start = 0;
 			region.end = sz64;
 			pcibios_bus_to_resource(dev, res, &region);
+			bar_disabled = true;
 		} else {
 			region.start = l64;
 			region.end = l64 + sz64;
 			pcibios_bus_to_resource(dev, res, &region);
-			dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n",
-				   pos, res);
 		}
 	} else {
 		sz = pci_size(l, sz, mask);
@@ -268,18 +266,23 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		region.start = l;
 		region.end = l + sz;
 		pcibios_bus_to_resource(dev, res, &region);
-
-		dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
 	}
 
- out:
+	goto out;
+
+
+fail:
+	res->flags = 0;
+out:
 	if (!dev->mmio_always_on)
 		pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
 
+	if (bar_too_big)
+		dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", pos);
+	if (res->flags && !bar_disabled)
+		dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
+
 	return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
- fail:
-	res->flags = 0;
-	goto out;
 }
 
 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)


More information about the Linuxppc-dev mailing list