[PATCH 1/2] powerpc/p4080ds: dts - add usb controller version info and port0

Shengzhou Liu Shengzhou.Liu at freescale.com
Fri Aug 10 20:48:31 EST 2012


Add the missing usb controller version info and port0, which is
required during setup usb phy.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
---
 arch/powerpc/boot/dts/fsl/p4080si-post.dtsi |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 8d35d2c..4f9c9f6 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -345,6 +345,13 @@
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
+	usb at 210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		port0;
+	};
 /include/ "qoriq-usb2-dr-0.dtsi"
+	usb at 211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	};
 /include/ "qoriq-sec4.0-0.dtsi"
 };
-- 
1.6.4




More information about the Linuxppc-dev mailing list