[PATCH] Powerpc 8xx CPM_UART delay in receive

[leroy christophe]

Le 14/08/2012 16:52, Alan Cox a écrit :
> On Tue, 14 Aug 2012 16:26:28 +0200
> Christophe Leroy <christophe.leroy at c-s.fr> wrote:
>
>> Hello,
>>
>> I'm not sure who to address this Patch to either
>>
>> It fixes a delay issue with CPM UART driver on Powerpc MPC8xx.
>> The problem is that with the actual code, the driver waits 32 IDLE patterns before returning the received data to the upper level. It means for instance about 1 second at 300 bauds.
>> This fix limits to one byte the waiting period.
> Take a look how the 8250 does it - I think you want to set the value
> based upon the data rate. Your patch will break it for everyone doing
> high seed I/O.
>
> Alan
>
I'm not sure I understand what you mean. As far as I can see 8250/16550 
is working a bit different, as it is based on a fifo and triggers an 
interrupt as soon as a given number of bytes is received. I also see 
that in case this amount is not reached, there is a receive-timeout 
which goes on after no byte is received for a duration of more than 4 bytes.

The PowerPC CPM is working differently. It doesn't use a fifo but 
buffers. Buffers are handed to the microprocessor only when they are 
full or after a timeout period which is adjustable. In the driver, the 
buffers are configured with a size of 32 bytes. And the timeout is set 
to the size of the buffer. That is this timeout that I'm reducing to 1 
byte in my proposed patch. I can't see what it would break for high 
speed I/O.

Christophe