June 2018 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Jun 1 14:30:26 AEST 2018
Ending: Fri Jun 29 16:33:19 AEST 2018
Messages: 165

• [Skiboot] [PATCH v2] SLW: Provide cpuidle state description in device tree   Abhishek
• [Skiboot] [PATCH] hw/npu2: Use NPU instead of NPU2 as log message prefix   Reza Arbab
• [Skiboot] [PATCH] npu2-opencapi: reduce number of retries to train the link   Frederic Barrat
• [Skiboot] [PATCH] p8-i2c: fix wrong request status when a reset is needed   Frederic Barrat
• [Skiboot] [PATCH] npu2: Use same compatible string for NVLink and OpenCAPI link nodes in device tree   Frederic Barrat
• [Skiboot] [PATCH 1/4] occ-sensor: Avoid using uninitialised struct cpu_thread   Shilpasri G Bhat
• [Skiboot] [PATCH 1/3] init, occ: Initialise OCC earlier on POWER9   Shilpasri G Bhat
• [Skiboot] [PATCH v2 1/3] init, occ: Initialise OCC earlier on BMC systems   Shilpasri G Bhat
• [Skiboot] [PATCH v2 2/3] occ: Move occ declarations into occ.h   Shilpasri G Bhat
• [Skiboot] [PATCH v2 3/3] occ: Add support for GPU presence detection   Shilpasri G Bhat
• [Skiboot] [PATCH] npu2-opencapi: reduce number of retries to train the link   Andrew Donnellan
• [Skiboot] [PATCH] Blockchain isn't the only data structure deserving of love   Andrew Donnellan
• [Skiboot] [PATCH] hw/bt.c: quieten all the noisy BT/IPMI messages   Andrew Donnellan
• [Skiboot] [PATCH 0/3] occ: GPU presence detection   Andrew Donnellan
• [Skiboot] [PATCH 1/3] init, occ: Initialise OCC earlier on POWER9   Andrew Donnellan
• [Skiboot] [PATCH 2/3] occ: Move occ declarations into occ.h   Andrew Donnellan
• [Skiboot] [PATCH 3/3] occ: Add support for GPU presence detection   Andrew Donnellan
• [Skiboot] [PATCH 1/3] init, occ: Initialise OCC earlier on POWER9   Andrew Donnellan
• [Skiboot] [PATCH v2 0/3] occ: GPU presence detection   Andrew Donnellan
• [Skiboot] [PATCH v2 1/3] init, occ: Initialise OCC earlier on BMC systems   Andrew Donnellan
• [Skiboot] [PATCH v2 2/3] occ: Move occ declarations into occ.h   Andrew Donnellan
• [Skiboot] [PATCH v2 3/3] occ: Add support for GPU presence detection   Andrew Donnellan
• [Skiboot] [PATCH v3 0/3] occ: GPU presence detection   Andrew Donnellan
• [Skiboot] [PATCH v3 1/3] init, occ: Initialise OCC earlier on BMC systems   Andrew Donnellan
• [Skiboot] [PATCH v3 2/3] occ: Move occ declarations into occ.h   Andrew Donnellan
• [Skiboot] [PATCH v3 3/3] occ: Add support for GPU presence detection   Andrew Donnellan
• [Skiboot] [PATCH] slw: Fix trivial typo in debug message   Andrew Donnellan
• [Skiboot] [PATCH] hw/npu2: Use NPU instead of NPU2 as log message prefix   Andrew Donnellan
• [Skiboot] [PATCH] hw/npu2: Use NPU instead of NPU2 as log message prefix   Andrew Donnellan
• [Skiboot] [PATCH v2] hw/npu2, core/hmi: Use NPU instead of NPU2 as log message prefix   Andrew Donnellan
• [Skiboot] [PATCH] npu2: Use same compatible string for NVLink and OpenCAPI link nodes in device tree   Andrew Donnellan
• [Skiboot] [PATCH] npu2: Use same compatible string for NVLink and OpenCAPI link nodes in device tree   Andrew Donnellan
• [Skiboot] [PATCH v2] npu2: Use same compatible string for NVLink and OpenCAPI link nodes in device tree   Andrew Donnellan
• [Skiboot] [PATCH v2 0/3] occ: GPU presence detection   Andrew Donnellan
• [Skiboot] [PATCH] occ: Update Dynamic Data comment block with new GPU presence fields   Andrew Donnellan
• [Skiboot] [PATCH] plat/qemu: add PNOR support   Cédric Le Goater
• [Skiboot] [PATCH v2] plat/qemu: add PNOR support   Cédric Le Goater
• [Skiboot] [PATCH v2] plat/qemu: add PNOR support   Cédric Le Goater
• [Skiboot] [PATCH v2] SLW: Provide cpuidle state description in device tree   Abhishek Goel
• [Skiboot] [PATCH v3 00/18] MPIPL support   Vasant Hegde
• [Skiboot] [PATCH v3 01/18] FSP/MDST: Rename fsp-mdst-table.c -> fsp-sysdump.c   Vasant Hegde
• [Skiboot] [PATCH v3 02/18] hdata: Fix MDST structure   Vasant Hegde
• [Skiboot] [PATCH v3 03/18] hdata: Define MDDT and MDRT table   Vasant Hegde
• [Skiboot] [PATCH v3 04/18] hdata: Setup memory for MDDT table   Vasant Hegde
• [Skiboot] [PATCH v3 05/18] hdata: Setup memory for MDRT table   Vasant Hegde
• [Skiboot] [PATCH v3 06/18] fadump: Define destination memory for OPAL boot crash   Vasant Hegde
• [Skiboot] [PATCH v3 07/18] hdata: Add support for early OPAL crash   Vasant Hegde
• [Skiboot] [PATCH v3 08/18] hdata: Adjust various structure offset after relocation   Vasant Hegde
• [Skiboot] [PATCH v3 09/18] fadump: Define FADUMP structure   Vasant Hegde
• [Skiboot] [PATCH v3 10/18] hdata: Create ibm,dump DT node   Vasant Hegde
• [Skiboot] [PATCH v3 11/18] hdata: Add result table property to ibm, dump node   Vasant Hegde
• [Skiboot] [PATCH v3 12/18] fadump: Add fw-source-table to ibm, dump node   Vasant Hegde
• [Skiboot] [PATCH v3 13/18] fadump: Add OPAL API to register for fadump   Vasant Hegde
• [Skiboot] [PATCH v3 14/18] fadump: Introduce new reboot type   Vasant Hegde
• [Skiboot] [PATCH v3 15/18] fadump: Send OPAL relocated base address to SBE   Vasant Hegde
• [Skiboot] [PATCH v3 16/18] fadump: Add support to trigger memory preserving IPL on BMC system   Vasant Hegde
• [Skiboot] [PATCH v3 17/18] fadump: Add documentation   Vasant Hegde
• [Skiboot] [PATCH v3 18/18] mbox: Reset bmc mbox in MPIPL path   Vasant Hegde
• [Skiboot] [PATCH v3 18/18] mbox: Reset bmc mbox in MPIPL path   Vasant Hegde
• [Skiboot] [PATCH] fast-reboot: Disable on FSP IPL side change   Vasant Hegde
• [Skiboot] [PATCH] hdata: Make sure reserved node name starts with "ibm, "   Vasant Hegde
• [Skiboot] [PATCH] hdata: Fix dtc warnings   Vasant Hegde
• [Skiboot] [PATCH] vpd: Sanitize VPD data   Vasant Hegde
• [Skiboot] [PATCH v2 1/2] vpd: Sanitize VPD data   Vasant Hegde
• [Skiboot] [PATCH v2 2/2] vpd: Add vendor property to processor node   Vasant Hegde
• [Skiboot] [PATCH] hdata: Make sure reserved node name starts with "ibm, "   Vasant Hegde
• [Skiboot] [PATCH] hdata: Fix dtc warnings   Vasant Hegde
• [Skiboot] [PATCH v2 1/2] vpd: Sanitize VPD data   Vasant Hegde
• [Skiboot] [PATCH] pci: Fix PCI_DEVICE_ID()   Andrew Jeffery
• [Skiboot] [PATCH] core: Add test for PCI quirks   Andrew Jeffery
• [Skiboot] [PATCH v3 18/18] mbox: Reset bmc mbox in MPIPL path   Andrew Jeffery
• [Skiboot] [PATCH v3 18/18] mbox: Reset bmc mbox in MPIPL path   Andrew Jeffery
• [Skiboot] [PATCH skiboot] npu2: Reset NVLinks on hot reset   Alexey Kardashevskiy
• [Skiboot] [PATCH 0/9] ipmi-watchdog: Fixes for error handling and general cleanups   William Kennington
• [Skiboot] [PATCH 4/4] psi: Properly mask errors in SEMR   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH 4/4] psi: Properly mask errors in SEMR   Ananth N Mavinakayanahalli
• [Skiboot] [PATCH] Blockchain isn't the only data structure deserving of love   Samuel Mendoza-Jonas
• [Skiboot] [PATCH V2] NX: Add NX coprocessor init opal call   Haren Myneni
• [Skiboot] [PATCH V3] NX: Add NX coprocessor init opal call   Haren Myneni
• [Skiboot] [PATCH 1/3] phb4: Minimise wait when moving through FRESET states   Michael Neuling
• [Skiboot] [PATCH 2/3] phb4: Move training trace logging to next state.   Michael Neuling
• [Skiboot] [PATCH 3/3] phb4: Delay training till after PERST is deasserted   Michael Neuling
• [Skiboot] [PATCH] pci: Fix PCI_DEVICE_ID()   Oliver
• [Skiboot] [PATCH] hw/bt.c: quieten all the noisy BT/IPMI messages   Oliver
• [Skiboot] [PATCH] hdata: Make sure reserved node name starts with "ibm, "   Oliver
• [Skiboot] [PATCH] hdata: Fix dtc warnings   Oliver
• [Skiboot] [PATCH] hdata: Fix dtc warnings   Oliver
• [Skiboot] [PATCH] hdata: Make sure reserved node name starts with "ibm, "   Oliver
• [Skiboot] [PATCH] hw/bt.c: quieten all the noisy BT/IPMI messages   Alistair Popple
• [Skiboot] [PATCH] opal/hmi: Display correct chip id while printing NPU FIRs.   Mahesh Jagannath Salgaonkar
• [Skiboot] [PATCH] opal/hmi: Display correct chip id while printing NPU FIRs.   Balbir Singh
• [Skiboot] [PATCH] opal/hmi: Display correct chip id while printing NPU FIRs.   Balbir Singh
• [Skiboot] [PATCH skiboot] npu2: Reset NVLinks on hot reset   Balbir Singh
• [Skiboot] [PATCH] libflash: fix gcov build   Stewart Smith
• [Skiboot] [PATCH] Quieten console output on boot   Stewart Smith
• [Skiboot] [PATCH V2] NX: Add NX coprocessor init opal call   Stewart Smith
• [Skiboot] [PATCH V2] NX: Add NX coprocessor init opal call   Stewart Smith
• [Skiboot] [PATCH v2 0/5] npu2-opencapi: Use presence detection and reset   Stewart Smith
• [Skiboot] [PATCH] pflash: Use correct prefix when installing   Stewart Smith
• [Skiboot] [PATCH] ffspart: Don't require user to create blank partitions manually   Stewart Smith
• [Skiboot] [PATCH 0/9] ipmi-watchdog: Fixes for error handling and general cleanups   Stewart Smith
• [Skiboot] [PATCH 3/9] ipmi-watchdog: Don't reset the watchdog twice   Stewart Smith
• [Skiboot] [PATCH] opal/hmi: Display correct chip id while printing NPU FIRs.   Stewart Smith
• [Skiboot] [PATCH] Quieten console output on boot   Stewart Smith
• [Skiboot] [PATCH] libflash: fix gcov build   Stewart Smith
• [Skiboot] [PATCH] Blockchain isn't the only data structure deserving of love   Stewart Smith
• [Skiboot] [PATCH] hw/bt.c: quieten all the noisy BT/IPMI messages   Stewart Smith
• [Skiboot] [PATCH] libflash: quieten our logging   Stewart Smith
• [Skiboot] [PATCH v3 01/18] FSP/MDST: Rename fsp-mdst-table.c -> fsp-sysdump.c   Stewart Smith
• [Skiboot] On vacation next week   Stewart Smith
• [Skiboot] [PATCH] hw/bt.c: quieten all the noisy BT/IPMI messages   Stewart Smith
• [Skiboot] [PATCH] ipmi-sel: use opal_booting() over poking at debug descriptor   Stewart Smith
• [Skiboot] [PATCH] Split debug_descriptor out into own include file   Stewart Smith
• [Skiboot] [PATCH] Move include lock.h to fsp-console.h from console.h   Stewart Smith
• [Skiboot] [PATCH RFC hostboot] bootconfig: Describe pnor boot flags   Stewart Smith
• [Skiboot] [PATCH] pci: Fix PCI_DEVICE_ID()   Stewart Smith
• [Skiboot] [PATCH] pci: Fix PCI_DEVICE_ID()   Stewart Smith
• [Skiboot] [PATCH] core: Add test for PCI quirks   Stewart Smith
• [Skiboot] [PATCH] npu2-opencapi: reduce number of retries to train the link   Stewart Smith
• [Skiboot] [PATCH V3] NX: Add NX coprocessor init opal call   Stewart Smith
• [Skiboot] [PATCH] p8-i2c: fix wrong request status when a reset is needed   Stewart Smith
• [Skiboot] [PATCH] Blockchain isn't the only data structure deserving of love   Stewart Smith
• [Skiboot] [PATCH] hw/bt.c: quieten all the noisy BT/IPMI messages   Stewart Smith
• [Skiboot] [PATCH] libflash: quieten our logging   Stewart Smith
• [Skiboot] [PATCH] external/xscom-utils: Add python library for xscom access   Stewart Smith
• [Skiboot] [PATCH v2] plat/qemu: add PNOR support   Stewart Smith
• [Skiboot] [PATCH skiboot] npu2: Reset NVLinks on hot reset   Stewart Smith
• [Skiboot] [PATCH] fast-reboot: Disable on FSP IPL side change   Stewart Smith
• [Skiboot] [PATCH] ipmi-sel: use opal_booting() over poking at debug descriptor   Stewart Smith
• [Skiboot] [PATCH] Split debug_descriptor out into own include file   Stewart Smith
• [Skiboot] [PATCH] Move include lock.h to fsp-console.h from console.h   Stewart Smith
• [Skiboot] [PATCH 0/4] Misc fixes   Stewart Smith
• [Skiboot] [PATCH 0/2] Use mbox scratch register for p8   Stewart Smith
• [Skiboot] skiboot v6.1-rc1 released!   Stewart Smith
• [Skiboot] [PATCH] opal-ci: qemu: Use the powernv-3.0 branch   Stewart Smith
• [Skiboot] [RFC v2 PATCH 0/6] Faster fast reboot (2x!)   Stewart Smith
• [Skiboot] [RFC v2 PATCH 1/6] Add cpu_queue_job_on_node() to do node local jobs   Stewart Smith
• [Skiboot] [RFC v2 PATCH 2/6] fast-reboot: parallel memory clearing   Stewart Smith
• [Skiboot] [RFC v2 PATCH 3/6] Scan PCI and clear memory simultaneously   Stewart Smith
• [Skiboot] [RFC v2 PATCH 4/6] mem_region: log region name on mem_alloc failure   Stewart Smith
• [Skiboot] [RFC v2 PATCH 5/6] mem_check(): Correct alignment assumptions   Stewart Smith
• [Skiboot] [RFC v2 PATCH 6/6] core/flash.c: cache loaded resources   Stewart Smith
• [Skiboot] [PATCH v2 1/2] vpd: Sanitize VPD data   Stewart Smith
• [Skiboot] [PATCH v2] hw/npu2, core/hmi: Use NPU instead of NPU2 as log message prefix   Stewart Smith
• [Skiboot] [PATCH] slw: Fix trivial typo in debug message   Stewart Smith
• [Skiboot] [PATCH v2 0/3] occ: GPU presence detection   Stewart Smith
• [Skiboot] [PATCH] pmem: volatile bindings for the poorly enabled   Stewart Smith
• [Skiboot] [PATCH v2 1/2] vpd: Sanitize VPD data   Stewart Smith
• [Skiboot] [PATCH v2 0/3] occ: GPU presence detection   Stewart Smith
• [Skiboot] [PATCH] external/xscom-utils: Add python library for xscom access   Madhavan Srinivasan
• [Skiboot] [PATCH] pflash: Use correct prefix when installing   Joel Stanley
• [Skiboot] [PATCH 0/4] Misc fixes   Joel Stanley
• [Skiboot] [PATCH 1/4] occ-sensor: Avoid using uninitialised struct cpu_thread   Joel Stanley
• [Skiboot] [PATCH 2/4] timebase: Remove unused remaining time calculation   Joel Stanley
• [Skiboot] [PATCH 3/4] hdata: Remove hn variable where it is unused   Joel Stanley
• [Skiboot] [PATCH 4/4] psi: Properly mask errors in SEMR   Joel Stanley
• [Skiboot] [PATCH 4/4] psi: Properly mask errors in SEMR   Joel Stanley
• [Skiboot] [PATCH v2] plat/qemu: add PNOR support   Joel Stanley
• [Skiboot] [PATCH] opal-ci: qemu: Use the powernv-3.0 branch   Joel Stanley
• [Skiboot] [PATCH v2] SLW: Provide cpuidle state description in device tree   ppaidipe
• [Skiboot] [PATCH] vpd: Sanitize VPD data   ppaidipe
• [Skiboot] [PATCH v2 1/2] vpd: Sanitize VPD data   ppaidipe
• [Skiboot] [PATCH v2 2/2] vpd: Add vendor property to processor node   ppaidipe
• [Skiboot] [PATCH] trival: Remove an extra reg read of VUART1_GCTRLA   Balbir singh
• [Skiboot] [PATCH] pmem: volatile bindings for the poorly enabled   Balbir singh

Last message date: Fri Jun 29 16:33:19 AEST 2018
Archived on: Fri Jun 29 16:33:43 AEST 2018

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...