[Skiboot] [PATCH v3 10/18] hdata: Create ibm,dump DT node

Vasant Hegde hegdevasant at linux.vnet.ibm.com
Wed Jun 6 15:35:27 AEST 2018


We use MPIPL system parameter to detect whether MPIPL is supported or not.
If its supported create new device tree node (/ibm,dump) to pass all dump
related information to kernel. This patch creates new node and populates
below properties:
  - compatible   - ibm,dump version
  - fw-load-area - Memory used by OPAL to load kernel/initrd from PNOR
                   (KERNEL_LOAD_BASE & INITRAMFS_LOAD_BASE)
                   This is the temporary memory used by OPAL during boot.
		   Later Linux kernel is free to use this memory. We will
		   pass this information to Linux. If Linux kernel is using
		   these memory it will take necessary steps to make sure
		   OPAL stomping these memory doesn't impact vmcore.

Signed-off-by: Vasant Hegde <hegdevasant at linux.vnet.ibm.com>
---
 hdata/spira.c | 23 +++++++++++++++++++++++
 hdata/spira.h |  1 +
 2 files changed, 24 insertions(+)

diff --git a/hdata/spira.c b/hdata/spira.c
index 5a6289e9a..cc9633186 100644
--- a/hdata/spira.c
+++ b/hdata/spira.c
@@ -1028,6 +1028,25 @@ static void dt_init_secureboot_node(const struct iplparams_sysparams *sysparams)
 	dt_add_property_cells(node, "hw-key-hash-size", hw_key_hash_size);
 }
 
+static void fadump_add_node(void)
+{
+	u64 fw_load_area[4];
+	struct dt_node *node;
+
+	if (proc_gen < proc_gen_p9)
+		return;
+
+	node = dt_new(dt_root, "ibm,dump");
+	assert(node);
+	dt_add_property_string(node, "compatible", "ibm,opal-dump-v1");
+
+	fw_load_area[0] = (u64)KERNEL_LOAD_BASE;
+	fw_load_area[1] = KERNEL_LOAD_SIZE;
+	fw_load_area[2] = (u64)INITRAMFS_LOAD_BASE;
+	fw_load_area[3] = INITRAMFS_LOAD_SIZE;
+	dt_add_property(node, "fw-load-area", fw_load_area, sizeof(fw_load_area));
+}
+
 static void add_iplparams_sys_params(const void *iplp, struct dt_node *node)
 {
 	const struct iplparams_sysparams *p;
@@ -1115,6 +1134,10 @@ static void add_iplparams_sys_params(const void *iplp, struct dt_node *node)
 	if (sys_attributes & SYS_ATTR_RISK_LEVEL)
 		dt_add_property(node, "elevated-risk-level", NULL, 0);
 
+	/* Populate fadump node */
+	if (sys_attributes & SYS_ATTR_MPIPL_SUPPORTED)
+		fadump_add_node();
+
 	if (version >= 0x60 && proc_gen >= proc_gen_p9)
 		dt_init_secureboot_node(p);
 }
diff --git a/hdata/spira.h b/hdata/spira.h
index ef2aec257..398c1151a 100644
--- a/hdata/spira.h
+++ b/hdata/spira.h
@@ -363,6 +363,7 @@ struct iplparams_sysparams {
 	__be32		sys_eco_mode;
 #define SYS_ATTR_MULTIPLE_TPM PPC_BIT32(0)
 #define SYS_ATTR_RISK_LEVEL PPC_BIT32(3)
+#define SYS_ATTR_MPIPL_SUPPORTED PPC_BIT32(4)
 	__be32		sys_attributes;
 	__be32		mem_scrubbing;
 	__be16		cur_spl_value;
-- 
2.14.3



More information about the Skiboot mailing list