December 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Dec 1 02:33:45 EST 2013
Ending: Tue Dec 31 14:29:04 EST 2013
Messages: 577

• [PATCH] watchdog: mpc8xxx_wdt convert to watchdog core   Christophe Leroy
  • [PATCH] watchdog: mpc8xxx_wdt convert to watchdog core   Guenter Roeck
    • [PATCH] watchdog: mpc8xxx_wdt convert to watchdog core   leroy christophe
      • [PATCH] watchdog: mpc8xxx_wdt convert to watchdog core   Guenter Roeck
• [PATCH] watchdog: mpc8xxx_wdt: MPC8xx is HW enabled   Christophe Leroy
  • [PATCH] watchdog: mpc8xxx_wdt: MPC8xx is HW enabled   Guenter Roeck
    • [PATCH] watchdog: mpc8xxx_wdt: MPC8xx is HW enabled   Wolfgang Denk
      • [PATCH] watchdog: mpc8xxx_wdt: MPC8xx is HW enabled   Scott Wood
  • [PATCH] watchdog: mpc8xxx_wdt: MPC8xx is HW enabled   Guenter Roeck
• 3.13 Oops on ppc64_cpu --smt=off   Alexander Graf
  • 3.13 Oops on ppc64_cpu --smt=off   Preeti U Murthy
    • 3.13 Oops on ppc64_cpu --smt=off   Alexander Graf
      • 3.13 Oops on ppc64_cpu --smt=off   Preeti U Murthy
• 3.13-rc1: eth0 hw csum failure on powerpc   Christian Kujau
  • 3.13-rc1: eth0 hw csum failure on powerpc   Andreas Schwab
    • 3.13-rc1: eth0 hw csum failure on powerpc (bisected)   Christian Kujau
      • 3.13-rc1: eth0 hw csum failure on powerpc (bisected)   David Miller
• [PATCH v6 00/17] add COMMON_CLK support for PowerPC MPC512x   Gerhard Sittig
  • [PATCH v6 02/17] dts: mpc512x: introduce dt-bindings/clock/ header   Gerhard Sittig
    • [PATCH v6 02/17] dts: mpc512x: introduce dt-bindings/clock/ header   Mark Rutland
      • [PATCH v6 02/17] dts: mpc512x: introduce dt-bindings/clock/ header   Gerhard Sittig
    • [PATCH v6 02/17] dts: mpc512x: introduce dt-bindings/clock/ header   Anatolij Gustschin
  • [PATCH v6 03/17] dts: mpc512x: add clock related device tree specs   Gerhard Sittig
    • [PATCH v6 03/17] dts: mpc512x: add clock related device tree specs   Anatolij Gustschin
  • [PATCH v6 04/17] clk: mpc512x: introduce COMMON_CLK for MPC512x (disabled)   Gerhard Sittig
    • [PATCH v6 04/17] clk: mpc512x: introduce COMMON_CLK for MPC512x (disabled)   Anatolij Gustschin
  • [PATCH v6 05/17] clk: mpc512x: add backwards compat to the CCF code   Gerhard Sittig
    • [PATCH v6 05/17] clk: mpc512x: add backwards compat to the CCF code   Anatolij Gustschin
  • [PATCH v6 06/17] dts: mpc512x: add clock specs for client lookups   Gerhard Sittig
    • [PATCH v6 06/17] dts: mpc512x: add clock specs for client lookups   Anatolij Gustschin
  • [PATCH v6 07/17] clk: mpc5xxx: switch to COMMON_CLK, retire PPC_CLOCK   Gerhard Sittig
    • [PATCH v6 07/17] clk: mpc5xxx: switch to COMMON_CLK, retire PPC_CLOCK   Anatolij Gustschin
  • [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Gerhard Sittig
    • [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Mark Rutland
      • [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Gerhard Sittig
    • [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Mark Brown
    • [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Anatolij Gustschin
  • [PATCH v6 09/17] serial: mpc512x: adjust for OF based clock lookup   Gerhard Sittig
    • [PATCH v6 09/17] serial: mpc512x: adjust for OF based clock lookup   Greg Kroah-Hartman
    • [PATCH v6 09/17] serial: mpc512x: adjust for OF based clock lookup   Anatolij Gustschin
  • [PATCH v6 10/17] serial: mpc512x: setup the PSC FIFO clock as well   Gerhard Sittig
    • [PATCH v6 10/17] serial: mpc512x: setup the PSC FIFO clock as well   Greg Kroah-Hartman
    • [PATCH v6 10/17] serial: mpc512x: setup the PSC FIFO clock as well   Anatolij Gustschin
  • [PATCH v6 11/17] USB: fsl-mph-dr-of: adjust for OF based clock lookup   Gerhard Sittig
    • [PATCH v6 11/17] USB: fsl-mph-dr-of: adjust for OF based clock lookup   Greg Kroah-Hartman
    • [PATCH v6 11/17] USB: fsl-mph-dr-of: adjust for OF based clock lookup   Anatolij Gustschin
  • [PATCH v6 12/17] mtd: mpc5121_nfc: adjust for OF based clock lookup   Gerhard Sittig
    • [PATCH v6 12/17] mtd: mpc5121_nfc: adjust for OF based clock lookup   Anatolij Gustschin
  • [PATCH v6 13/17] [media] fsl-viu: adjust for OF based clock lookup   Gerhard Sittig
    • [PATCH v6 13/17] [media] fsl-viu: adjust for OF based clock lookup   Anatolij Gustschin
  • [PATCH v6 14/17] net: can: mscan: adjust to common clock support for mpc512x   Gerhard Sittig
    • [PATCH v6 14/17] net: can: mscan: adjust to common clock support for mpc512x   Anatolij Gustschin
  • [PATCH v6 15/17] net: can: mscan: remove non-CCF code for MPC512x   Gerhard Sittig
    • [PATCH v6 15/17] net: can: mscan: remove non-CCF code for MPC512x   Anatolij Gustschin
  • [PATCH v6 16/17] powerpc/mpc512x: improve DIU related clock setup   Gerhard Sittig
    • [PATCH v6 16/17] powerpc/mpc512x: improve DIU related clock setup   Anatolij Gustschin
  • [PATCH v6 17/17] clk: mpc512x: remove migration support workarounds   Gerhard Sittig
    • [PATCH v6 17/17] clk: mpc512x: remove migration support workarounds   Anatolij Gustschin
  • [PATCH v6 00/17] add COMMON_CLK support for PowerPC MPC512x   Gerhard Sittig
• [PATCH v6 01/17] powerpc/fsl-pci: improve clock API use   Gerhard Sittig
• Build regressions/improvements in v3.13-rc2   Geert Uytterhoeven
  • Build regressions/improvements in v3.13-rc2   Guenter Roeck
    • Build regressions/improvements in v3.13-rc2   Geert Uytterhoeven
• [PATCH 3/9] powerpc: Add TIF_ELF2ABI flag.   Rusty Russell
• ping: re: [PATCH 1/1] kernel code that do not handle NULL return of kmem_cache_zalloc   Zhouyi Zhou
  • ping: re:[PATCH 1/1] kernel code that do not handle NULL return of kmem_cache_zalloc   zhouzhouyi at gmail.com
  • ping: re: [PATCH 1/1] kernel code that do not handle NULL return of kmem_cache_zalloc   Alexander Graf
• [PATCH] powerpc: fix xmon disassembler for little-endian   Philippe Bergheaud
  • [PATCH] powerpc: fix xmon disassembler for little-endian   Tom Musta
    • [PATCH] powerpc: fix xmon disassembler for little-endian   Philippe Bergheaud
      • [PATCH] powerpc: fix xmon disassembler for little-endian   Benjamin Herrenschmidt
      • [PATCH] powerpc: fix xmon disassembler for little-endian   Philippe Bergheaud
• [PATCH v2] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface   Mark Brown
  • [PATCH v2] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface   Nicolin Chen
• [PATCH V4 7/9] cpuidle/powernv: Add "Fast-Sleep" CPU idle state   Preeti U Murthy
  • [PATCH V4 7/9] cpuidle/powernv: Add "Fast-Sleep" CPU idle state   Thomas Gleixner
• [PATCH V4 6/9] cpuidle/ppc: Add basic infrastructure to enable the broadcast framework on ppc   Preeti U Murthy
• [PATCH v3] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface   Nicolin Chen
  • [PATCH v3] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface   Mark Brown
• [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices   Alex Williamson
  • [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices   Varun Sethi
    • [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices   Alex Williamson
• [PATCH 1/3 v2] iommu/fsl: Factor out PCI specific code.   Alex Williamson
• [PATCH] powerpc/defconfig: Enable ath9k wireless card support   Chunhe Lan
  • [PATCH] powerpc/defconfig: Enable ath9k wireless card support   Scott Wood
• [RFC PATCH powerpc 1/2] fix using page adddress as the page stucture pointer in __pte_free_tlb()   Li Zhong
  • [RFC PATCH powerpc 2/2] adjust the variable type and name in __pte_free_tlb()   Li Zhong
• [V3 01/10] perf: New conditional branch filter criteria in branch stack sampling   Anshuman Khandual
• [PATCH] ASoC: fsl_ssi: Implement symmetric_channels and symmetric_samplebits   Nicolin Chen
  • [PATCH] ASoC: fsl_ssi: Implement symmetric_channels and symmetric_samplebits   Mark Brown
    • [PATCH] ASoC: fsl_ssi: Implement symmetric_channels and symmetric_samplebits   Nicolin Chen
      • [alsa-devel] [PATCH] ASoC: fsl_ssi: Implement symmetric_channels and symmetric_samplebits   Mark Brown
      • [alsa-devel] [PATCH] ASoC: fsl_ssi: Implement symmetric_channels and symmetric_samplebits   Nicolin Chen
• [PATCH v1 1/1] powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node   Gerhard Sittig
  • [PATCH v1 1/1] powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node   Anatolij Gustschin
    • [PATCH v1 1/1] powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node   Gerhard Sittig
      • [PATCH v1 1/1] powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node   Gerhard Sittig
• [PATCH v2] watchdog: mpc8xxx_wdt convert to watchdog core   Christophe Leroy
  • [PATCH v2] watchdog: mpc8xxx_wdt convert to watchdog core   Guenter Roeck
• [PATCH v4 1/1] powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100   Stephen Chivers
  • [PATCH v4 1/1] powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100   Geert Uytterhoeven
• Error in frreing hugepages with preemption enabled   Andrea Arcangeli
  • Error in frreing hugepages with preemption enabled   Benjamin Herrenschmidt
  • Error in frreing hugepages with preemption enabled   Bharat Bhushan
• [V3 00/10] perf: New conditional branch filter   Michael Ellerman
• [PATCH -V2 3/5] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Benjamin Herrenschmidt
  • [PATCH -V2 3/5] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Aneesh Kumar K.V
    • [PATCH -V2 3/5] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Benjamin Herrenschmidt
      • [PATCH -V2 3/5] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Rik van Riel
  • [PATCH -V2 3/5] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Rik van Riel
    • [PATCH -V2 3/5] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Benjamin Herrenschmidt
• [PATCH v3] watchdog: mpc8xxx_wdt convert to watchdog core   Christophe Leroy
  • [PATCH v3] watchdog: mpc8xxx_wdt convert to watchdog core   Guenter Roeck
• [PATCH 0/3] optimize for powerpc _PAGE_NUMA   Liu Ping Fan
  • [PATCH 1/3] powerpc: mm: make _PAGE_NUMA take effect   Liu Ping Fan
    • [PATCH 1/3] powerpc: mm: make _PAGE_NUMA take effect   Aneesh Kumar K.V
      • [PATCH 1/3] powerpc: mm: make _PAGE_NUMA take effect   Benjamin Herrenschmidt
      • [PATCH 1/3] powerpc: mm: make _PAGE_NUMA take effect   Liu ping fan
      • [PATCH 1/3] powerpc: mm: make _PAGE_NUMA take effect   Benjamin Herrenschmidt
      • [PATCH 1/3] powerpc: mm: make _PAGE_NUMA take effect   Liu ping fan
      • [PATCH 1/3] powerpc: mm: make _PAGE_NUMA take effect   Benjamin Herrenschmidt
      • [PATCH 1/3] powerpc: mm: make _PAGE_NUMA take effect   Liu ping fan
  • [PATCH 2/3] mm: export numa_migrate_prep()   Liu Ping Fan
  • [PATCH 3/3] powerpc: mm: optimize for the correctly placed page   Liu Ping Fan
    • [PATCH 3/3] powerpc: mm: optimize for the correctly placed page   Aneesh Kumar K.V
      • [PATCH 3/3] powerpc: mm: optimize for the correctly placed page   Liu ping fan
• [PATCH V4 00/10] perf: New conditional branch filter   Anshuman Khandual
  • [PATCH V4 01/10] perf: Add PERF_SAMPLE_BRANCH_COND   Anshuman Khandual
  • [PATCH V4 03/10] perf, tool: Conditional branch filter 'cond' added to perf record   Anshuman Khandual
  • [PATCH V4 04/10] x86, perf: Add conditional branch filtering support   Anshuman Khandual
    • [PATCH V4 04/10] x86, perf: Add conditional branch filtering support   Andi Kleen
  • [PATCH V4 06/10] powerpc, perf: Change the name of HW PMU branch filter tracking variable   Anshuman Khandual
  • [PATCH V4 07/10] powerpc, lib: Add new branch instruction analysis support functions   Anshuman Khandual
    • [PATCH V4 07/10] powerpc, lib: Add new branch instruction analysis support functions   Michael Ellerman
      • [PATCH V4 07/10] powerpc, lib: Add new branch instruction analysis support functions   Anshuman Khandual
      • [PATCH V4 07/10] powerpc, lib: Add new branch instruction analysis support functions   Anshuman Khandual
  • [PATCH V4 09/10] power8, perf: Change BHRB branch filter configuration   Anshuman Khandual
    • [PATCH V4 09/10] power8, perf: Change BHRB branch filter configuration   Michael Ellerman
      • [PATCH V4 09/10] power8, perf: Change BHRB branch filter configuration   Anshuman Khandual
      • [PATCH V4 09/10] power8, perf: Change BHRB branch filter configuration   Michael Ellerman
      • [PATCH V4 09/10] power8, perf: Change BHRB branch filter configuration   Anshuman Khandual
  • [PATCH V4 10/10] powerpc, perf: Cleanup SW branch filter list look up   Anshuman Khandual
    • [PATCH V4 10/10] powerpc, perf: Cleanup SW branch filter list look up   Michael Ellerman
      • [PATCH V4 10/10] powerpc, perf: Cleanup SW branch filter list look up   Anshuman Khandual
  • [PATCH V4 00/10] perf: New conditional branch filter   Michael Ellerman
    • [PATCH V4 00/10] perf: New conditional branch filter   Arnaldo Carvalho de Melo
      • [PATCH V4 00/10] perf: New conditional branch filter   Michael Ellerman
• [PATCH V4 02/10] powerpc, perf: Enable conditional branch filter for POWER8   Anshuman Khandual
• [PATCH V4 05/10] perf, documentation: Description for conditional branch filter   Anshuman Khandual
• [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Anshuman Khandual
  • [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Michael Ellerman
    • [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Anshuman Khandual
      • [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Anshuman Khandual
      • [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Michael Ellerman
    • [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Anshuman Khandual
      • [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Michael Ellerman
      • [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Anshuman Khandual
      • [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branch stack sampling framework   Michael Ellerman
• [PATCH v2] offb: make the screen properties endian safe   Cedric Le Goater
• [PATCH v3 1/2] offb: little endian fixes   Cédric Le Goater
• [PATCH v3 2/2] offb: add palette hack for little endian   Cédric Le Goater
• [PATCH 2/2] arch/powerpc: Dynamically allocate slb_shadow from memblock   Jeremy Kerr
  • [PATCH v2] arch/powerpc: Dynamically allocate slb_shadow from memblock   Jeremy Kerr
• [PATCH 1/2] arch/powerpc: Make slb_shadow a local   Jeremy Kerr
• [PATCH 3/8] IBM Akebono: Add support for a new PHY interface to the IBM emac driver   Benjamin Herrenschmidt
• [PATCH] powerpc/p1010rdb-pa: modify phy interrupt.   Zhao Qiang
• [PATCH 6/9] powerpc/pci: Use dev_is_pci() to check whether it is pci device   Yijing Wang
  • [PATCH 6/9] powerpc/pci: Use dev_is_pci() to check whether it is pci device   Wei Yang
    • [PATCH 6/9] powerpc/pci: Use dev_is_pci() to check whether it is pci device   Yijing Wang
      • [PATCH 6/9] powerpc/pci: Use dev_is_pci() to check whether it is pci device   Wei Yang
• [PATCH] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Hong H. Pham
  • [PATCH] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Aneesh Kumar K.V
    • [PATCH] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Hong H. Pham
      • [PATCH] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Hong H. Pham
    • [PATCH v2] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Hong H. Pham
    • [PATCH v3] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Hong H. Pham
      • [PATCH v3] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Benjamin Herrenschmidt
      • [PATCH v3] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Benjamin Herrenschmidt
      • [PATCH v3] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Aneesh Kumar K.V
      • [PATCH v3] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Aneesh Kumar K.V
      • [PATCH v3] powerpc: Fix PTE page address mismatch in pgtable ctor/dtor   Sebastian Andrzej Siewior
• [PATCH -V3] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Aneesh Kumar K.V
  • [PATCH -V3] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Rik van Riel
  • [PATCH -V3] mm: Move change_prot_numa outside CONFIG_ARCH_USES_NUMA_PROT_NONE   Mel Gorman
• [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Scott Wood
  • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Scott Wood
    • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Bharat Bhushan
      • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Scott Wood
      • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Alex Williamson
      • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Scott Wood
      • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Bharat.Bhushan at freescale.com
      • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Alex Williamson
      • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Bharat.Bhushan at freescale.com
  • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Bharat Bhushan
    • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Scott Wood
      • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Bharat.Bhushan at freescale.com
      • [PATCH 0/9 v2] vfio-pci: add support for Freescale IOMMU (PAMU)   Scott Wood
• [PATCH v3 00/11] Introduce pcim_enable_msi*() family helpers   Alexander Gordeev
• [PATCH] powernv: fix VFIO support with PHB3   Thadeu Lima de Souza Cascardo
  • [PATCH] powernv: fix VFIO support with PHB3   Alexey Kardashevskiy
    • [PATCH] powernv: fix VFIO support with PHB3   Thadeu Lima de Souza Cascardo
  • [PATCH] powernv: fix VFIO support with PHB3   Thadeu Lima de Souza Cascardo
• [PATCH] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   Scott Wood
  • [PATCH] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   christophe leroy
    • [PATCH] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   Benjamin Herrenschmidt
• [PATCH] DTS: DMA: Fix DMA3 interrupts   Scott Wood
  • [PATCH] DTS: DMA: Fix DMA3 interrupts   Hongbo Zhang
    • [PATCH] DTS: DMA: Fix DMA3 interrupts   Scott Wood
      • [PATCH] DTS: DMA: Fix DMA3 interrupts   Hongbo Zhang
      • [PATCH] DTS: DMA: Fix DMA3 interrupts   Li Yang
      • [PATCH] DTS: DMA: Fix DMA3 interrupts   Scott Wood
• [PATCH RFC v4 2/5] dma: mpc512x: add support for peripheral transfers   Alexander Popov
  • [PATCH RFC v4 2/5] dma: mpc512x: add support for peripheral transfers   Lars-Peter Clausen
    • [PATCH RFC v4 2/5] dma: mpc512x: add support for peripheral transfers   Alexander Popov
• [PATCH 1/6] powerpc: fix exception clearing in e500 SPE float emulation   Scott Wood
  • questions: second of the 2 pcie controllers does not scan the bus.   Ruchika
    • questions: second of the 2 pcie controllers does not scan the bus.   Ruchika
    • questions: second of the 2 pcie controllers does not scan the bus.   Scott Wood
  • [PATCHv2 1/6] powerpc: fix exception clearing in e500 SPE float emulation   Joseph S. Myers
• [PATCH] powerpc/44x: fix ocm_block allocation   Ilia Mirkin
  • [PATCH] powerpc/44x: fix ocm_block allocation   Vinh Huu Tuong Nguyen
    • [PATCH] powerpc/44x: fix ocm_block allocation   Ilia Mirkin
• [PATCH] drivers/tty: ehv_bytechan fails to build as a module   Anton Blanchard
• [PATCH][RESEND] powerpc: remove unused REDBOOT Kconfig parameter   Michael Opdenacker
  • [PATCH][RESEND] powerpc: remove unused REDBOOT Kconfig parameter   Benjamin Herrenschmidt
• linux-next: build failure after merge of the final tree (powerpc tree related)   Stephen Rothwell
• [PATCH V2 0/3] powerpc iommu: Remove hardcoded page sizes   Alistair Popple
  • [PATCH V2 1/3] powerpc iommu: Update constant names to reflect their hardcoded page size   Alistair Popple
  • [PATCH V2 2/3] powerpc iommu: Add it_page_shift field to determine iommu page size   Alistair Popple
  • [PATCH V2 3/3] powerpc iommu: Update the generic code to use dynamic iommu page sizes   Alistair Popple
• MPC8641 BASED Custom designed Board Linux stucks after Mounting cache hash table entries   Ashish
• [PATCH] powerpc: Fix up the kdump base cap to 128M   Mahesh J Salgaonkar
• [PATCH] powerpc: Fix "attempt to move .org backwards" error   Mahesh J Salgaonkar
  • [PATCH] powerpc: Fix "attempt to move .org backwards" error   Stephen Rothwell
    • [PATCH] powerpc: Fix "attempt to move .org backwards" error   Benjamin Herrenschmidt
• [PATCH] powerpc/52xx: re-enable bestcomm driver in defconfigs   Anatolij Gustschin
• Please pull 'merge' branch of 5xxx tree   Anatolij Gustschin
  • Please pull 'merge' branch of 5xxx tree   Anatolij Gustschin
• [PATCH] powerpc/pasemi: turn on devtmpfs in defconfig   Olof Johansson
• [PATCH 1/9] PCI: Use dev_is_pci() to check whether it is pci device   Bjorn Helgaas
  • [PATCH 1/9] PCI: Use dev_is_pci() to check whether it is pci device   Benjamin Herrenschmidt
    • [PATCH 1/9] PCI: Use dev_is_pci() to check whether it is pci device   Bjorn Helgaas
  • [PATCH 1/9] PCI: Use dev_is_pci() to check whether it is pci device   Yijing Wang
• [PATCH] powerpc/pseries: Don't try to register pseries cpu hotplug on non-pseries   Benjamin Herrenschmidt
  • [PATCH] powerpc/pseries: Don't try to register pseries cpu hotplug on non-pseries   Michael Ellerman
    • [PATCH] powerpc/pseries: Don't try to register pseries cpu hotplug on non-pseries   Benjamin Herrenschmidt
• [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Linus Torvalds
    • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
• [PATCH] powerpc/pseries: Select ARCH_RANDOM on pseries   Michael Ellerman
• [PATCH v4 1/5] PCI: pcibus address to resource converting take bus instead of dev   Yinghai Lu
• [PATCH] powerpc: set default kernel thread priority to medium-low   Philippe Bergheaud
  • [PATCH] powerpc: set default kernel thread priority to medium-low   Michael Ellerman
    • [PATCH] powerpc: set default kernel thread priority to medium-low   Benjamin Herrenschmidt
      • [PATCH] powerpc: set default kernel thread priority to medium-low   Philippe Bergheaud
      • [PATCH] powerpc: set default kernel thread priority to medium-low   Michael Ellerman
      • [PATCH] powerpc: set default kernel thread priority to medium-low   Philippe Bergheaud
      • [PATCH] powerpc: set default kernel thread priority to medium-low   Michael Ellerman
• [PATCH v2 00/11] Consolidate asm/fixmap.h files   Jonas Bonn
• [PATCH v1 1/1] powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)   Gerhard Sittig
  • [PATCH v1 1/1] powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)   Anatolij Gustschin
• [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Gerhard Sittig
  • [PATCH v1 1/4] powerpc/512x: clk: minor comment updates   Gerhard Sittig
  • [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Matteo Facchinetti
    • [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Sinan Akman
      • [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Scott Wood
      • [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Sinan Akman
    • [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Gerhard Sittig
  • [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Anatolij Gustschin
  • [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Mike Turquette
• [PATCH v1 2/4] powerpc/512x: clk: enforce even SDHC divider values   Gerhard Sittig
• [PATCH v1 3/4] powerpc/512x: clk: support MPC5121/5123/5125 SoC variants   Gerhard Sittig
• [PATCH v1 4/4] powerpc/512x: dts: add MPC5125 clock specs   Gerhard Sittig
• [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   Scott Wood
  • [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   Christophe Leroy
  • [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   leroy christophe
    • [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   Scott Wood
      • [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   leroy christophe
      • [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   Scott Wood
      • [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   leroy christophe
      • [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   Scott Wood
• [PATCH] KVM: PPC: Use schedule instead of cond_resched   Peter Zijlstra
  • [PATCH] KVM: PPC: Use schedule instead of cond_resched   Alexander Graf
    • [PATCH] KVM: PPC: Use schedule instead of cond_resched   Alexander Graf
      • [PATCH] KVM: PPC: Use schedule instead of cond_resched   Aneesh Kumar K.V
      • [PATCH] KVM: PPC: Use schedule instead of cond_resched   Aneesh Kumar K.V
      • [PATCH] KVM: PPC: Use schedule instead of cond_resched   Benjamin Herrenschmidt
  • [PATCH] KVM: PPC: Use schedule instead of cond_resched   Benjamin Herrenschmidt
• [V2 PATCH 3/3] powerpc: Fix Unaligned LE Floating Point Loads and Stores   Paul Mackerras
  • [V2 PATCH 3/3] powerpc: Fix Unaligned LE Floating Point Loads and Stores   Paul Mackerras
    • [V2 PATCH 3/3] powerpc: Fix Unaligned LE Floating Point Loads and Stores   Tom Musta
      • [V2 PATCH 3/3] powerpc: Fix Unaligned LE Floating Point Loads and Stores   Tom Musta
      • [V2 PATCH 3/3] powerpc: Fix Unaligned LE Floating Point Loads and Stores   Paul Mackerras
• [PATCH] spi/fsl-espi: Add Power Management support for eSPI controller   Hou Zhiqiang
  • [PATCH] spi/fsl-espi: Add Power Management support for eSPI controller   Mark Brown
• [PATCH] mtd: m25p80: Add Power Management support   Hou Zhiqiang
• [PATCH 0/4] powernv: kvm: numa fault improvement   Liu Ping Fan
  • [PATCH 1/4] mm: export numa_migrate_prep()   Liu Ping Fan
  • [PATCH 2/4] powernv: kvm: make _PAGE_NUMA take effect   Liu Ping Fan
  • [PATCH 3/4] powernv: kvm: extend input param for lookup_linux_pte   Liu Ping Fan
  • [PATCH 4/4] powernv: kvm: make the handling of _PAGE_NUMA faster for guest   Liu Ping Fan
• [PATCH 1/5] powerpc/85xx/dts: add third elo3 dma component   Shengzhou Liu
  • [PATCH 2/5] powerpc/fsl_pci: add versionless pci compatible   Shengzhou Liu
  • [PATCH 3/5] powerpc/fsl-booke: Add initial device tree support for T2080/T2081   Shengzhou Liu
  • [PATCH 4/5] powerpc/fsl-booke: Add initial T208x QDS board support   Shengzhou Liu
    • [PATCH 4/5] powerpc/fsl-booke: Add initial T208x QDS board support   Scott Wood
      • [PATCH 4/5] powerpc/fsl-booke: Add initial T208x QDS board support   Shengzhou.Liu at freescale.com
      • [PATCH 4/5] powerpc/fsl-booke: Add initial T208x QDS board support   Scott Wood
  • [PATCH 5/5] powerpc/fsl-booke: Enable T208xQDS board   Shengzhou Liu
  • [PATCH 1/5] powerpc/85xx/dts: add third elo3 dma component   Hongbo Zhang
    • [PATCH 1/5] powerpc/85xx/dts: add third elo3 dma component   Shengzhou.Liu at freescale.com
      • [PATCH 1/5] powerpc/85xx/dts: add third elo3 dma component   Hongbo Zhang
      • [PATCH 1/5] powerpc/85xx/dts: add third elo3 dma component   Scott Wood
• [PATCH v6 tip/core/locking 8/8] powerpc: Full barrier for smp_mb__after_unlock_lock()   Paul E. McKenney
• [PATCH 3/4] powerpc/kexec: Use global IND_FLAGS macro   Geoff Levand
• [PATCH 0/4] Minor fixes and improvements for kexec   Geoff Levand
  • [PATCH 2/4] kexec: Add IND_FLAGS macro   Geoff Levand
    • [PATCH 2/4] kexec: Add IND_FLAGS macro   Zhang Yanfei
      • [PATCH 2/4] kexec: Add IND_FLAGS macro   Geoff Levand
  • [PATCH 0/4] Minor fixes and improvements for kexec   Simon Horman
  • [PATCH 0/4] Minor fixes and improvements for kexec   WANG Chao
• [PATCH v2] spi/fsl-espi: Add Power Management support for eSPI controller   Hou Zhiqiang
  • [PATCH v2] spi/fsl-espi: Add Power Management support for eSPI controller   Mark Brown
• [PATCH 0/8] ppc64 little endian bug fixes   Anton Blanchard
  • [PATCH 1/8] powerpc: PTRACE_PEEKUSR always returns FPR0   Anton Blanchard
  • [PATCH 2/8] powerpc: Fix endian issue in setup-common.c   Anton Blanchard
  • [PATCH 3/8] powerpc: Fix topology core_id endian issue on LE builds   Anton Blanchard
  • [PATCH 4/8] powerpc/pseries: Fix endian issues in /proc/ppc64/lparcfg   Anton Blanchard
  • [PATCH 5/8] powerpc/pseries: Fix endian issues in nvram code   Anton Blanchard
  • [PATCH 6/8] powerpc/pseries: Fix PCIE link speed endian issue   Anton Blanchard
  • [PATCH 7/8] powerpc/pseries: Fix endian issues in MSI code   Anton Blanchard
  • [PATCH 8/8] powerpc: Fix endian issues in crash dump code   Anton Blanchard
    • [PATCH 8/8] powerpc: Fix endian issues in crash dump code   Michael Ellerman
• [PATCH v2] mtd: m25p80: Add Power Management support   Hou Zhiqiang
• [PATCH v11] PPC: POWERNV: move iommu_add_device earlier   Alexey Kardashevskiy
  • [PATCH v11] PPC: POWERNV: move iommu_add_device earlier   Bharat.Bhushan at freescale.com
  • [PATCH v11] PPC: POWERNV: move iommu_add_device earlier   Varun Sethi
• [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series   Nicolin Chen
  • [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series   Mark Brown
    • [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series   Nicolin Chen
  • [RFC][PATCH v1] ASoC: fsl_ssi: Add DAI master mode support for SSI on i.MX series   Mark Brown
• powerpc/powernv: Framework to log critical errors on powernv.   Deepthi Dharwar
  • powerpc/powernv: Framework to log critical errors on powernv.   Michael Ellerman
    • powerpc/powernv: Framework to log critical errors on powernv.   Benjamin Herrenschmidt
    • [PATCH] powerpc: Make unaligned accesses endian-safe for powerpc   Rajesh B Prathipati
      • [PATCH] powerpc: Make unaligned accesses endian-safe for powerpc   Anton Blanchard
• [1/3] powerpc/vfio: Enable on POWERNV platform   Scott Wood
  • [1/3] powerpc/vfio: Enable on POWERNV platform   Alexey Kardashevskiy
    • [1/3] powerpc/vfio: Enable on POWERNV platform   Scott Wood
      • [1/3] powerpc/vfio: Enable on POWERNV platform   Bharat.Bhushan at freescale.com
• AUTO: Michael Barry is out of the office (returning 17/12/2013)   Michael Barry
• [PATCH 1/2] power7, perf: Make some new raw event codes available in sysfs   Michael Ellerman
  • [PATCH 1/2] power7, perf: Make some new raw event codes available in sysfs   Anshuman Khandual
    • [PATCH 1/2] power7, perf: Make some new raw event codes available in sysfs   Michael Ellerman
• [PATCH v7] clk: corenet: Adds the clock binding   Yuantian Tang
• [RFC PATCH] time: Support in tick broadcast framework for archs without an external wakeup source   Preeti U Murthy
  • [RFC PATCH] time: Support in tick broadcast framework for archs without an external wakeup source   Benjamin Herrenschmidt
    • [RFC PATCH] time: Support in tick broadcast framework for archs without an external wakeup source   Preeti U Murthy
  • [RFC PATCH] time: Support in tick broadcast framework for archs without an external wakeup source   Preeti U Murthy
• [PATCH] powerpc/powernv: Fix endian issue in opal_xscom_read   Anton Blanchard
• [PATCH] powerpc/powernv: Fix OPAL LPC access in Little Endian   Benjamin Herrenschmidt
• [PATCH] powerpc, perf: Configure BHRB filter before enabling PMU interrupts   Anshuman Khandual
  • [PATCH] powerpc, perf: Configure BHRB filter before enabling PMU interrupts   Michael Ellerman
    • [PATCH] powerpc, perf: Configure BHRB filter before enabling PMU interrupts   Anshuman Khandual
• [GIT PULL locking/mb] Locking/memory-barrier commits   Paul E. McKenney
• [PATCH 05/10] powerpc: select ARCH_MIGHT_HAVE_PC_SERIO   Mark Salter
• [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Mark Salter
  • [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   H. Peter Anvin
    • [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Dmitry Torokhov
      • [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Mark Salter
      • [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   David Miller
      • [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Dmitry Torokhov
  • [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Ralf Baechle
• [RFC PATCH v3] powerpc: Loading kernels over 8Mbytes without CONFIG_PIN_TLB   Christophe Leroy
• [PATCH] powerpc/sysdev: Fix a mpic section mismatch for MPC85xx   Christian Engelmayer
  • [PATCH] powerpc/sysdev: Fix a mpic section mismatch for MPC85xx   Benjamin Herrenschmidt
    • [PATCH] powerpc/sysdev: Fix a mpic section mismatch for MPC85xx   Christian Engelmayer
• [PATCH] powerpc/sysdev: Fix a pci section mismatch for Book E   Christian Engelmayer
• [PATCH] powerpc: Fix endian issues in power7/8 machine check handler   Anton Blanchard
• [PATCH] powerpc: Fix bad stack check in exception entry   Michael Neuling
  • [PATCH] powerpc: Fix bad stack check in exception entry   Michael Ellerman
• [PATCH] powerpc/book3s: Recover from MC in sapphire on SCOM read via MMIO.   Mahesh J Salgaonkar
• [PATCH] This patch adds support to read error logs from OPAL and export them   Mahesh J Salgaonkar
  • [PATCH] This patch adds support to read error logs from OPAL and export them   Mahesh Jagannath Salgaonkar
• [PATCH v5 4/4] powerpc/85xx: add sysfs for pw20 state and altivec idle   Dongsheng.Wang at freescale.com
  • [PATCH v5 4/4] powerpc/85xx: add sysfs for pw20 state and altivec idle   Scott Wood
• [PATCH] powerpc/powernv: Read opal error log and export it through sysfs interface.   Mahesh J Salgaonkar
• [PATCH 2/2] drivers: tty: Mark the function hvc_poll_init() as static in hvc_console.c   Josh Triplett
  • [PATCH 2/2] drivers: tty: Mark the function hvc_poll_init() as static in hvc_console.c   Rashika Kheria
• [PATCH v2] powerpc/powernv: Framework to log critical errors on powernv.   Deepthi Dharwar
  • [PATCH v2] powerpc/powernv: Framework to log critical errors on powernv.   Michael Ellerman
    • [PATCH v2] powerpc/powernv: Framework to log critical errors on powernv.   Deepthi Dharwar
      • [PATCH v2] powerpc/powernv: Framework to log critical errors on powernv.   Michael Ellerman
      • [PATCH v2] powerpc/powernv: Framework to log critical errors on powernv.   Deepthi Dharwar
    • [PATCH 2/8] IBM Akebono: Add a SDHCI platform driver   Alistair Popple
• commit e38c0a1f breaks powerpc boards with uli1575 chip   Nikita Yushchenko
  • commit e38c0a1f breaks powerpc boards with uli1575 chip   Rob Herring
    • commit e38c0a1f breaks powerpc boards with uli1575 chip   Nikita Yushchenko
      • commit e38c0a1f breaks powerpc boards with uli1575 chip   Benjamin Herrenschmidt
    • commit e38c0a1f breaks powerpc boards with uli1575 chip   Thierry Reding
• [PATCH v6 1/4] powerpc/fsl: add E6500 PVR and SPRN_PWRMGTCR0 define   Dongsheng Wang
  • [PATCH v6 2/4] powerpc/85xx: add hardware automatically enter altivec idle state   Dongsheng Wang
  • [PATCH v6 3/4] powerpc/85xx: add hardware automatically enter pw20 state   Dongsheng Wang
  • [PATCH v6 4/4] powerpc/85xx: add sysfs for pw20 state and altivec idle   Dongsheng Wang
  • [PATCH v6 1/4] powerpc/fsl: add E6500 PVR and SPRN_PWRMGTCR0 define   Dongsheng.Wang at freescale.com
• Chip Select register with 8bit bus size...   neorf3k
• [PATCH v2 00/10] Kconfig: cleanup SERIO_I8042 dependencies   Mark Salter
  • [PATCH v2 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Mark Salter
  • [PATCH v2 00/10] Kconfig: cleanup SERIO_I8042 dependencies   Luck, Tony
• [PATCH v2 05/10] powerpc: select ARCH_MIGHT_HAVE_PC_SERIO   Mark Salter
• [PATCH] of/irq: Fix device_node refcount in of_irq_parse_raw()   Cédric Le Goater
  • [PATCH] of/irq: Fix device_node refcount in of_irq_parse_raw()   Benjamin Herrenschmidt
    • [PATCH] of/irq: Fix device_node refcount in of_irq_parse_raw()   Rob Herring
      • [PATCH] of/irq: Fix device_node refcount in of_irq_parse_raw()   Benjamin Herrenschmidt
• [PATCH] powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian   Anton Blanchard
  • [PATCH] powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian   Anton Blanchard
    • [PATCH] powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian   Michael Ellerman
      • [PATCH] powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian   Anton Blanchard
      • [PATCH] powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian   Michael Ellerman
• [v6][PATCH 5/5] powerpc/book3e/kgdb: Fix a single stgep case of lazy IRQ   Scott Wood
• [v6][PATCH 2/5] powerpc/book3e: store crit/mc/dbg exception thread info   Scott Wood
• [v3][PATCH 1/8] powerpc/book3e: rename interrupt_end_book3e with __end_interrupts   Scott Wood
• [v3][PATCH 2/8] powerpc/book3e: support CONFIG_RELOCATABLE   Scott Wood
• [v3][PATCH 3/8] book3e/kexec/kdump: enable kexec for kernel   Scott Wood
• [v3][PATCH 4/8] book3e/kexec/kdump: create a 1:1 TLB mapping   Scott Wood
• [v3][PATCH 5/8] book3e/kexec/kdump: introduce a kexec kernel flag   Scott Wood
• [v3][PATCH 6/8] book3e/kexec/kdump: implement ppc64 kexec specfic   Scott Wood
• [v3][PATCH 7/8] book3e/kexec/kdump: redefine VIRT_PHYS_OFFSET   Scott Wood
• [v3][PATCH 8/8] book3e/kexec/kdump: recover "r4 = 0" to create the initial TLB   Scott Wood
• [PATCH v12] PPC: POWERNV: move iommu_add_device earlier   Alexey Kardashevskiy
• [PATCH] powerpc: book3s: kvm: Don't abuse host r2 in exit path   Aneesh Kumar K.V
  • [PATCH] powerpc: book3s: kvm: Don't abuse host r2 in exit path   Alexander Graf
• [PATCH 1/2] powerpc/p1022ds: fix rtc compatible string   Dongsheng Wang
  • [PATCH 2/2] powerpc/p1022ds: add a interrupt for rtc node   Dongsheng Wang
  • [PATCH 1/2] powerpc/p1022ds: fix rtc compatible string   Dongsheng.Wang at freescale.com
• [PATCH v2 2/6] PCI/MSI: Factor out pci_get_msi_cap() interface   Bjorn Helgaas
• [PATCH] rapidio: add modular rapidio core build into powerpc and mips branches   Alexandre Bounine
• [PATCH] powerpc: book3s: kvm: Use the saved dsisr and dar values   Alexander Graf
  • [PATCH] powerpc: book3s: kvm: Use the saved dsisr and dar values   Paul Mackerras
  • [PATCH] powerpc: book3s: kvm: Use the saved dsisr and dar values   Aneesh Kumar K.V
    • [PATCH] powerpc: book3s: kvm: Use the saved dsisr and dar values   Alexander Graf
      • [PATCH] powerpc: book3s: kvm: Use the saved dsisr and dar values   Aneesh Kumar K.V
      • [PATCH] powerpc: book3s: kvm: Use the saved dsisr and dar values   Alexander Graf
• [v3, 3/7] powerpc: enable the relocatable support for the fsl booke 32bit kernel   Scott Wood
  • [v3, 3/7] powerpc: enable the relocatable support for the fsl booke 32bit kernel   Kevin Hao
• [2/2,v8] powerpc/fsl-booke: Add initial T104x_QDS board support   Scott Wood
• [PATCH] powerpc/512x: dts: disable MPC5125 usb module   Matteo Facchinetti
  • [PATCH] powerpc/512x: dts: disable MPC5125 usb module   Gerhard Sittig
    • [PATCH] powerpc/512x: dts: disable MPC5125 usb module   Matteo Facchinetti
• [PATCH 02/38] powerpc: qe_lib: add missing put_device call   Levente Kurusa
• [PATCH 03/38] powerpc: cell: add missing put_device call   Levente Kurusa
• [PATCH 04/38] powerpc: kernel: add missing put_device call   Levente Kurusa
• [PATCH] powernv: eeh: fix possible buffer overrun in ioda_eeh_phb_diag()   Brian W Hart
  • [PATCH] powernv: eeh: fix possible buffer overrun in ioda_eeh_phb_diag()   Gavin Shan
    • [PATCH] powernv: eeh: fix possible buffer overrun in ioda_eeh_phb_diag()   Gavin Shan
      • [PATCH] powernv: eeh: fix possible buffer overrun in ioda_eeh_phb_diag()   Brian W Hart
• [PATCH] powernv: eeh: add buffer for P7IOC hub error data   Brian W Hart
  • [PATCH] powernv: eeh: add buffer for P7IOC hub error data   Gavin Shan
    • [PATCH] powernv: eeh: add buffer for P7IOC hub error data   Brian W Hart
• [PATCH V4] powerpc/kernel/sysfs: cleanup set up macros for PMC/non-PMC SPRs   Madhavan Srinivasan
• [PATCH v2] powerpc/512x: dts: disable MPC5125 usb module   Matteo Facchinetti
  • [PATCH v2] powerpc/512x: dts: disable MPC5125 usb module   Anatolij Gustschin
• [RFC] linux/pci: move pci_platform_pm_ops to linux/pci.h   Dongsheng Wang
  • [RFC] linux/pci: move pci_platform_pm_ops to linux/pci.h   Bjorn Helgaas
• [PATCH v3 REPOST 0/4] i2c : i2c-ibm-iic : use interrupts to perform the data transfer   jean-jacques hiblot
  • [PATCH v3 REPOST 1/4] i2c: i2c-ibm-iic: cleanup.   jean-jacques hiblot
  • [PATCH v3 REPOST 2/4] i2c: i2c-ibm-iic: perform the transfer in the interrupt handler   jean-jacques hiblot
  • [PATCH v3 REPOST 3/4] i2c: i2c-ibm-iic: Implements transfer abortion   jean-jacques hiblot
  • [PATCH v3 REPOST 4/4] i2c: i2c-ibm-iic: Implements a polling mode   jean-jacques hiblot
• [PATCH v2 0/9] cpuidle: rework device state count handling   Bartlomiej Zolnierkiewicz
  • [PATCH v2 1/9] ARM: EXYNOS: cpuidle: fix AFTR mode check   Bartlomiej Zolnierkiewicz
    • [PATCH v2 1/9] ARM: EXYNOS: cpuidle: fix AFTR mode check   Kukjin Kim
    • [PATCH v2 1/9] ARM: EXYNOS: cpuidle: fix AFTR mode check   Daniel Lezcano
  • [PATCH v2 2/9] POWERPC: pseries: cpuidle: remove superfluous dev->state_count initialization   Bartlomiej Zolnierkiewicz
  • [PATCH v2 3/9] POWERPC: pseries: cpuidle: use the common cpuidle_[un]register() routines   Bartlomiej Zolnierkiewicz
  • [PATCH v2 4/9] ACPI / cpuidle: fix max idle state handling with hotplug CPU support   Bartlomiej Zolnierkiewicz
  • [PATCH v2 5/9] ACPI / cpuidle: remove dev->state_count setting   Bartlomiej Zolnierkiewicz
  • [PATCH v2 6/9] intel_idle: do C1E promotion disable quirk for hotplugged CPUs   Bartlomiej Zolnierkiewicz
    • [PATCH v2 6/9] intel_idle: do C1E promotion disable quirk for hotplugged CPUs   Daniel Lezcano
  • [PATCH v2 7/9] intel_idle: remove superfluous dev->state_count initialization   Bartlomiej Zolnierkiewicz
    • [PATCH v2 7/9] intel_idle: remove superfluous dev->state_count initialization   Daniel Lezcano
  • [PATCH v2 8/9] intel_idle: use the common cpuidle_[un]register() routines   Bartlomiej Zolnierkiewicz
    • [PATCH v2 8/9] intel_idle: use the common cpuidle_[un]register() routines   Daniel Lezcano
  • [PATCH v2 9/9] cpuidle: remove state_count field from struct cpuidle_device   Bartlomiej Zolnierkiewicz
    • [PATCH v2 9/9] cpuidle: remove state_count field from struct cpuidle_device   Daniel Lezcano
• [PATCH v2] powernv: eeh: add buffer for P7IOC hub error data   Brian W Hart
  • [PATCH v2] powernv: eeh: add buffer for P7IOC hub error data   Gavin Shan
• AUTO: Michael Barry is out of the office (returning 06/01/2014)   Michael Barry
• [PATCH] powerpc: Align p_end   Anton Blanchard
• [PATCH 0/4] powerpc: Enable ILE on pSeries without H_MODE_SET   Alexander Graf
  • [PATCH 1/4] powerpc: Add global exports for all interrupt vectors   Alexander Graf
  • [PATCH 3/4] powerpc: Add hack to make ppc64le work on hosts without ILE   Alexander Graf
• [PATCH 2/4] powerpc: Add relocation code for fixups   Alexander Graf
• [PATCH 4/4] powerpc: Don't return to BE mode when we are already there   Alexander Graf
• [PATCH] ibmveth: Fix more little endian issues   Alexander Graf
  • [PATCH] ibmveth: Fix more little endian issues   Anton Blanchard
    • [PATCH] ibmveth: Fix more little endian issues   Alexander Graf
    • [PATCH] ibmveth: Fix more little endian issues   Joe Perches
      • [PATCH] ibmveth: Fix more little endian issues   Anton Blanchard
      • [PATCH] ibmveth: Fix more little endian issues   Ben Hutchings
      • [PATCH] ibmveth: Fix more little endian issues   Benjamin Herrenschmidt
• [PATCH] powerpc/mpic_timer: fix the time calculation is not accurate   Dongsheng Wang
  • [PATCH] powerpc/mpic_timer: fix the time calculation is not accurate   Scott Wood
    • [PATCH] powerpc/mpic_timer: fix the time calculation is not accurate   Dongsheng.Wang at freescale.com
• [PATCH 02/21] net: freescale: slight optimization of addr compare   Ding Tianhong
• [PATCH 1/3] powerpc/xmon: Don't loop forever in get_output_lock()   Michael Ellerman
  • [PATCH 2/3] powerpc/xmon: Fix timeout loop in get_output_lock()   Michael Ellerman
  • [PATCH 3/3] powerpc/xmon: Don't signal we've entered until we're finished printing   Michael Ellerman
• [PATCH] iommu: Add empty stub for iommu_group_get_by_id()   Alexey Kardashevskiy
  • [PATCH] iommu: Add empty stub for iommu_group_get_by_id()   Joerg Roedel
• [PATCH v4 00/10] powerpc: enable the relocatable support for fsl booke 32bit kernel   Kevin Hao
  • [PATCH v4 01/10] powerpc/fsl_booke: protect the access to MAS7   Kevin Hao
  • [PATCH v4 02/10] powerpc/fsl_booke: introduce get_phys_addr function   Kevin Hao
  • [PATCH v4 03/10] powerpc: introduce macro LOAD_REG_ADDR_PIC   Kevin Hao
  • [PATCH v4 04/10] powerpc: enable the relocatable support for the fsl booke 32bit kernel   Kevin Hao
  • [PATCH v4 05/10] powerpc/fsl_booke: set the tlb entry for the kernel address in AS1   Kevin Hao
  • [PATCH v4 06/10] powerpc: introduce early_get_first_memblock_info   Kevin Hao
  • [PATCH v4 07/10] powerpc/fsl_booke: introduce map_mem_in_cams_addr   Kevin Hao
  • [PATCH v4 08/10] powerpc/fsl_booke: make sure PAGE_OFFSET map to memstart_addr for relocatable kernel   Kevin Hao
  • [PATCH v4 09/10] powerpc/fsl_booke: smp support for booting a relocatable kernel above 64M   Kevin Hao
  • [PATCH v4 10/10] powerpc/fsl_booke: enable the relocatable for the kdump kernel   Kevin Hao
• [PATCH v2 02/20] net: freescale: slight optimization of addr compare   Ding Tianhong
• [PATCH RFC v6 0/5] MPC512x DMA slave s/g support, OF DMA lookup   Alexander Popov
  • [PATCH RFC v6 1/5] dma: mpc512x: reorder mpc8308 specific instructions   Alexander Popov
  • [PATCH RFC v6 2/5] dma: mpc512x: add support for peripheral transfers   Alexander Popov
  • [PATCH RFC v6 3/5] dma: of: Add common xlate function for matching by channel id   Alexander Popov
  • [PATCH RFC v6 4/5] dma: mpc512x: register for device tree channel lookup   Alexander Popov
    • [PATCH RFC v6 4/5] dma: mpc512x: register for device tree channel lookup   Gerhard Sittig
    • [PATCH RFC v6 4/5] dma: mpc512x: register for device tree channel lookup   Gerhard Sittig
  • [PATCH RFC v6 5/5] HACK mmc: mxcmmc: enable clocks for the MPC512x   Alexander Popov
• [PATCH] ASoC: fsl_sai: Move the global registers setting to _dai_probe()   Xiubo Li
  • [PATCH] ASoC: fsl_sai: Move the global registers setting to _dai_probe()   Mark Brown
• [PATCH v3 01/19] net: freescale: remove unused compare_addr()   Ding Tianhong
• [PATCH] ASoC: fsl_sai: Add disable operation for the corresponding data channel.   Xiubo Li
  • [PATCH] ASoC: fsl_sai: Add disable operation for the corresponding data channel.   Mark Brown
• [PATCH v2 2/3] powerpc: use the jump label for cpu_has_feature   Kevin Hao
• [PATCH 1/4] powerpc/eeh: Add restore_bars operation   Gavin Shan
  • [PATCH 4/4] powerpc/eeh: Eliminate AER gap   Gavin Shan
  • [PATCH 1/4] powerpc/eeh: Add restore_bars operation   Benjamin Herrenschmidt
• [PATCH 2/4] powerpc/eeh: Cache AER capability in EEH dev   Gavin Shan
• [PATCH 3/4] powerpc/powernv: Detect PHB chip revision   Gavin Shan
• [PATCH 1/4] powerpc/85xx/dts: add third elo3 dma component   Shengzhou Liu
  • [PATCH 2/4] powerpc/fsl_pci: add versionless pci compatible   Shengzhou Liu
  • [PATCH 3/4] powerpc/fsl-booke: Add support for T2080/T2081 SoC   Shengzhou Liu
  • [PATCH 4/4] powerpc/fsl-booke: Add initial T208x QDS board support   Shengzhou Liu
• [PATCH] powerpc/powernv: Remove unnecessary assignment   Gavin Shan
• [PATCH] ASoC: fsl_sai: Fix one bug for hardware limitation.   Xiubo Li
  • [PATCH] ASoC: fsl_sai: Fix one bug for hardware limitation.   Mark Brown
    • [PATCH] ASoC: fsl_sai: Fix one bug for hardware limitation.   Li.Xiubo at freescale.com
• MPC8641 based custom board kernel Bug   Ashish Khetan
  • MPC8641 based custom board kernel Bug   wyang
    • MPC8641 based custom board kernel Bug   Ashish Khetan
      • MPC8641 based custom board kernel Bug   Sri Ram Vemulpali
      • MPC8641 based custom board kernel Bug   Ashish Khetan
      • MPC8641 based custom board kernel Bug   Sri Ram Vemulpali
• [PATCH v3.5 01/19] net: freescale: remove unused compare_addr()   Ding Tianhong
• [PATCH] mtd: nand: remove pasemi_nand driver   Olof Johansson
  • [PATCH] mtd: nand: remove pasemi_nand driver   Paul Bolle
    • [PATCH] mtd: nand: remove pasemi_nand driver   Olof Johansson
• 3.13-rc3: BUG: soft lockup - CPU#0 stuck for 23s!   Christian Kujau
• [question] Can the execution of the atomtic operation instruction pair lwarx/stwcx be interrrupted by local HW interruptions?   Gavin Hu
  • [question] Can the execution of the atomtic operation instruction pair lwarx/stwcx be interrrupted by local HW interruptions?   wyang
• [PATCH 11/39] powerpc: endian safe trampoline   Olof Johansson
  • [PATCH 11/39] powerpc: endian safe trampoline   Benjamin Herrenschmidt
• [PATCH] powerpc: Fix alignment of secondary cpu spin vars   Olof Johansson
  • [PATCH] powerpc: Fix alignment of secondary cpu spin vars   Olof Johansson
• [PATCH 19/25] fix error return code   Geert Uytterhoeven
• [PATCH 0/25] fix error return code   Julia Lawall
  • [PATCH 19/25] fix error return code   Julia Lawall
• [PATCH -V2] POWERPC: BOOK3S: KVM: Use the saved dsisr and dar values on book3s 64   Aneesh Kumar K.V
  • [PATCH -V2] POWERPC: BOOK3S: KVM: Use the saved dsisr and dar values on book3s 64   Alexander Graf
• [PATCH] block/ps3: Remove obsolete reference to MTD   Geert Uytterhoeven
• [PATCH 1/2] powerpc: Fix the setup of CPU-to-Node mappings during CPU online   Srivatsa S. Bhat
  • [PATCH 2/2] powerpc: Add debug checks to catch invalid cpu-to-node mappings   Srivatsa S. Bhat
• [PATCH] powerpc: add vr save/restore functions   Andreas Schwab

Last message date: Tue Dec 31 14:29:04 EST 2013
Archived on: Tue Dec 31 14:44:23 EST 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...