[PATCH v1 1/1] powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node

[Gerhard Sittig]

[ Cc: to Matteo as well ]

On Tue, Dec 03, 2013 at 15:04 +0100, Anatolij Gustschin wrote:
> 
> On Tue,  3 Dec 2013 11:56:52 +0100
> Gerhard Sittig <gsi at denx.de> wrote:
> 
> > the 'soc' node in the common .dtsi for MPC5121 has an '#interrupt-cells'
> > property although this node is not an interrupt controller
> > 
> > remove this erroneously placed property because starting with v3.13-rc1
> > lookup and resolution of 'interrupts' specs for peripherals gets misled,
> > emits 'no irq domain found' WARN() messages and breaks the boot process
> > 
> >   irq: no irq domain found for /soc at 80000000 !
> >   ------------[ cut here ]------------
> >   WARNING: at /home/gsi/SRC/linux-torvalds/drivers/of/platform.c:171
> > [ ... ]
> > 
> >   ...
> >   irq: no irq domain found for /soc at 80000000 !
> >   fsl-diu-fb 80002100.display: could not get DIU IRQ
> >   fsl-diu-fb: probe of 80002100.display failed with error -22
> >   irq: no irq domain found for /soc at 80000000 !
> >   mpc512x_dma 80014000.dma: Error mapping IRQ!
> >   mpc512x_dma: probe of 80014000.dma failed with error -22
> >   ...
> >   irq: no irq domain found for /soc at 80000000 !
> >   fs_enet: probe of 80002800.ethernet failed with error -22
> >   ...
> >   irq: no irq domain found for /soc at 80000000 !
> >   mpc5121-rtc 80000a00.rtc: mpc5121_rtc_probe: could not request irq: 0
> >   mpc5121-rtc: probe of 80000a00.rtc failed with error -22
> >   ...
> > 
> > [ best viewed with 'git diff -U5' to have DT node names in the context ]
> > 
> > Cc: Anatolij Gustschin <agust at denx.de>
> > Cc: linuxppc-dev at lists.ozlabs.org
> > Cc: devicetree at vger.kernel.org
> > Signed-off-by: Gerhard Sittig <gsi at denx.de>
> > ---
> >  arch/powerpc/boot/dts/mpc5121.dtsi |    1 -
> >  1 file changed, 1 deletion(-)
> 
> applied, thanks!

FYI: I only noticed yesterday that MPC5125 suffers from the same
issue, have sent <1386669068-2477-1-git-send-email-gsi at denx.de>
to fix that as well.  Both patches may get squashed when going
upstream.  Don't have a dump at hand for MPC5125 as I don't have
access to hardware.

Matteo, can you verify that an unpatched v3.13-rc1 (up to and
including -rc3) won't boot, and that the patch fixes the issue
for you?  Forgot to Cc: you on the MPC5125 patch, will bounce it
to you.  Thanks!


virtually yours
Gerhard Sittig
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de