MPC8641 based custom board kernel Bug

Ashish Khetan curieux.khetan at gmail.com
Fri Dec 27 16:20:00 EST 2013


I am using the defconfig from linux kernel tree and for CCSR in u-boot its
F8000000 so the same i am using in device tree... so my question is - is it
unable to parse device tree ? or in device tree some thing need to modify
in device tree or in kernel source...
 please give some light on this...


Thanks & Regards
Ashish Khetan


On Fri, Dec 27, 2013 at 4:21 AM, Sri Ram Vemulpali
<sri.ram.gmu06 at gmail.com>wrote:

> Why do not you use deconfig from linux kernel tree. Modify only base
> address of CCSR (soc node) for child nodes of root in device tree.
> arch/powerpc/boot/dts/mpc8641_hpcn.dts.
>
> Sri
>
>
> On Thu, Dec 26, 2013 at 3:48 AM, Ashish Khetan <curieux.khetan at gmail.com>wrote:
>
>> i tried to dig more inside mpic_alloc fails. the function
>> of_find_matching_node calls inside from mpic_alloc() should return the node
>> at which pic is connected but it returns NULL. but why? In device tree i am
>> using the following.. may be it will helpful.
>> /dts-v1/;
>>
>> / {
>>     model = "MPC8641HPCN";
>>     compatible = "fsl,mpc8641hpcn";
>>     #address-cells = <0x1>;
>>     #size-cells = <0x1>;
>>
>>     aliases {
>>         ethernet0 = "/soc8641 at f8000000/ethernet at 24000";
>>         ethernet1 = "/soc8641 at f8000000/ethernet at 25000";
>>         ethernet2 = "/soc8641 at f8000000/ethernet at 26000";
>>         ethernet3 = "/soc8641 at f8000000/ethernet at 27000";
>>         serial0 = "/soc8641 at f8000000/serial at 4500";
>>     };
>>
>>     cpus {
>>         #address-cells = <0x1>;
>>         #size-cells = <0x0>;
>>
>>         PowerPC,8641 at 0 {
>>             device_type = "cpu";
>>             reg = <0x0>;
>>             d-cache-line-size = <0x20>;
>>             i-cache-line-size = <0x20>;
>>             d-cache-size = <0x8000>;
>>             i-cache-size = <0x8000>;
>>             timebase-frequency = <0x0>;
>>             bus-frequency = <0x0>;
>>             clock-frequency = <0x0>;
>>         };
>>     };
>>
>>     memory {
>>         device_type = "memory";
>>         reg = <0x0 0x20000000>;
>>     };
>>
>>     localbus at f8005000 {
>>         #address-cells = <0x2>;
>>         #size-cells = <0x1>;
>>         compatible = "fsl,mpc8641-localbus", "simple-bus";
>>         reg = <0xf8005000 0x1000>;
>>         interrupts = <0x13 0x2>;
>>         interrupt-parent = <0x1>;
>>         ranges = <0x0 0x0 0xff000000 0x1000000>;
>>
>>         flash at 0,0 {
>>             compatible = "cfi-flash";
>>             reg = <0x0 0x0 0x800000>;
>>             bank-width = <0x2>;
>>             device-width = <0x2>;
>>             #address-cells = <0x1>;
>>             #size-cells = <0x1>;
>>         };
>>     };
>>
>>     soc8641 at f8000000 {
>>         #address-cells = <0x1>;
>>         #size-cells = <0x1>;
>>         device_type = "soc";
>>         compatible = "simple-bus";
>>         ranges = <0x0 0xf8000000 0x100000>;
>>         bus-frequency = <0x0>;
>>
>>         mcm-law at 0 {
>>             compatible = "fsl,mcm-law";
>>             reg = <0x0 0x1000>;
>>             fsl,num-laws = <0xa>;
>>         };
>>
>>         mcm at 1000 {
>>             compatible = "fsl,mpc8641-mcm", "fsl,mcm";
>>             reg = <0x1000 0x1000>;
>>             interrupts = <0x11 0x2>;
>>             interrupt-parent = <0x1>;
>>         };
>>
>>         dma at 21300 {
>>             #address-cells = <0x1>;
>>             #size-cells = <0x1>;
>>             compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
>>             reg = <0x21300 0x4>;
>>             ranges = <0x0 0x21100 0x200>;
>>             cell-index = <0x0>;
>>
>>             dma-channel at 0 {
>>                 compatible = "fsl,mpc8641-dma-channel",
>> "fsl,eloplus-dma-channel";
>>                 reg = <0x0 0x80>;
>>                 cell-index = <0x0>;
>>                 interrupt-parent = <0x1>;
>>                 interrupts = <0x14 0x2>;
>>             };
>>
>>             dma-channel at 80 {
>>                 compatible = "fsl,mpc8641-dma-channel",
>> "fsl,eloplus-dma-channel";
>>                 reg = <0x80 0x80>;
>>                 cell-index = <0x1>;
>>                 interrupt-parent = <0x1>;
>>                 interrupts = <0x15 0x2>;
>>             };
>>
>>             dma-channel at 100 {
>>                 compatible = "fsl,mpc8641-dma-channel",
>> "fsl,eloplus-dma-channel";
>>                 reg = <0x100 0x80>;
>>                 cell-index = <0x2>;
>>                 interrupt-parent = <0x1>;
>>                 interrupts = <0x16 0x2>;
>>             };
>>
>>             dma-channel at 180 {
>>                 compatible = "fsl,mpc8641-dma-channel",
>> "fsl,eloplus-dma-channel";
>>                 reg = <0x180 0x80>;
>>                 cell-index = <0x3>;
>>                 interrupt-parent = <0x1>;
>>                 interrupts = <0x17 0x2>;
>>             };
>>         };
>>
>>         ethernet at 24000 {
>>             #address-cells = <0x1>;
>>             #size-cells = <0x1>;
>>             cell-index = <0x0>;
>>             device_type = "network";
>>             model = "TSEC";
>>             compatible = "gianfar";
>>             reg = <0x24000 0x1000>;
>>             ranges = <0x0 0x24000 0x1000>;
>>             local-mac-address = [00 00 00 00 00 00];
>>             interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
>>             interrupt-parent = <0x1>;
>>             tbi-handle = <0x2>;
>>             phy-handle = <0x3>;
>>             phy-connection-type = "rgmii-id";
>>
>>             mdio at 520 {
>>                 #address-cells = <0x1>;
>>                 #size-cells = <0x0>;
>>                 compatible = "fsl,gianfar-mdio";
>>                 reg = <0x520 0x20>;
>>
>>                 ethernet-phy at 0 {
>>                     interrupt-parent = <0x1>;
>>                     interrupts = <0xa 0x1>;
>>                     reg = <0x0>;
>>                     device_type = "ethernet-phy";
>>                     linux,phandle = <0x3>;
>>                 };
>>
>>                 ethernet-phy at 1 {
>>                     interrupt-parent = <0x1>;
>>                     interrupts = <0xa 0x1>;
>>                     reg = <0x1>;
>>                     device_type = "ethernet-phy";
>>                     linux,phandle = <0x5>;
>>                 };
>>
>>                 ethernet-phy at 2 {
>>                     interrupt-parent = <0x1>;
>>                     interrupts = <0xa 0x1>;
>>                     reg = <0x2>;
>>                     device_type = "ethernet-phy";
>>                     linux,phandle = <0x7>;
>>                 };
>>
>>                 ethernet-phy at 3 {
>>                     interrupt-parent = <0x1>;
>>                     interrupts = <0xa 0x1>;
>>                     reg = <0x3>;
>>                     device_type = "ethernet-phy";
>>                     linux,phandle = <0x9>;
>>                 };
>>
>>                 tbi-phy at 11 {
>>                     reg = <0x11>;
>>                     device_type = "tbi-phy";
>>                     linux,phandle = <0x2>;
>>                 };
>>             };
>>         };
>>
>>         ethernet at 25000 {
>>             #address-cells = <0x1>;
>>             #size-cells = <0x1>;
>>             cell-index = <0x1>;
>>             device_type = "network";
>>             model = "TSEC";
>>             compatible = "gianfar";
>>             reg = <0x25000 0x1000>;
>>             ranges = <0x0 0x25000 0x1000>;
>>             local-mac-address = [00 00 00 00 00 00];
>>             interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
>>             interrupt-parent = <0x1>;
>>             tbi-handle = <0x4>;
>>             phy-handle = <0x5>;
>>             phy-connection-type = "rgmii-id";
>>
>>             mdio at 520 {
>>                 #address-cells = <0x1>;
>>                 #size-cells = <0x0>;
>>                 compatible = "fsl,gianfar-tbi";
>>                 reg = <0x520 0x20>;
>>
>>                 tbi-phy at 11 {
>>                     reg = <0x11>;
>>                     device_type = "tbi-phy";
>>                     linux,phandle = <0x4>;
>>                 };
>>             };
>>         };
>>
>>         ethernet at 26000 {
>>             #address-cells = <0x1>;
>>             #size-cells = <0x1>;
>>             cell-index = <0x2>;
>>             device_type = "network";
>>             model = "TSEC";
>>             compatible = "gianfar";
>>             reg = <0x26000 0x1000>;
>>             ranges = <0x0 0x26000 0x1000>;
>>             local-mac-address = [00 00 00 00 00 00];
>>             interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
>>             interrupt-parent = <0x1>;
>>             tbi-handle = <0x6>;
>>             phy-handle = <0x7>;
>>             phy-connection-type = "rgmii-id";
>>
>>             mdio at 520 {
>>                 #address-cells = <0x1>;
>>                 #size-cells = <0x0>;
>>                 compatible = "fsl,gianfar-tbi";
>>                 reg = <0x520 0x20>;
>>
>>                 tbi-phy at 11 {
>>                     reg = <0x11>;
>>                     device_type = "tbi-phy";
>>                     linux,phandle = <0x6>;
>>                 };
>>             };
>>         };
>>
>>         ethernet at 27000 {
>>             #address-cells = <0x1>;
>>             #size-cells = <0x1>;
>>             cell-index = <0x3>;
>>             device_type = "network";
>>             model = "TSEC";
>>             compatible = "gianfar";
>>             reg = <0x27000 0x1000>;
>>             ranges = <0x0 0x27000 0x1000>;
>>             local-mac-address = [00 00 00 00 00 00];
>>             interrupts = <0x25 0x2 0x26 0x2 0x27 0x2>;
>>             interrupt-parent = <0x1>;
>>             tbi-handle = <0x8>;
>>             phy-handle = <0x9>;
>>             phy-connection-type = "rgmii-id";
>>
>>             mdio at 520 {
>>                 #address-cells = <0x1>;
>>                 #size-cells = <0x0>;
>>                 compatible = "fsl,gianfar-tbi";
>>                 reg = <0x520 0x20>;
>>
>>                 tbi-phy at 11 {
>>                     reg = <0x11>;
>>                     device_type = "tbi-phy";
>>                     linux,phandle = <0x8>;
>>                 };
>>             };
>>         };
>>
>>         serial at 4500 {
>>             cell-index = <0x0>;
>>             device_type = "serial";
>>             compatible = "ns16550";
>>             reg = <0x4500 0x100>;
>>             clock-frequency = <0x0>;
>>             interrupts = <0x2a 0x2>;
>>             interrupt-parent = <0x1>;
>>         };
>>
>>         pic at 40000 {
>>             interrupt-controller;
>>             #address-cells = <0x0>;
>>             #interrupt-cells = <0x2>;
>>             reg = <0x40000 0x40000>;
>>             compatible = "chrp,open-pic";
>>             device_type = "open-pic";
>>             linux,phandle = <0x1>;
>>             phandle = <0x1>;
>>         };
>>
>>         global-utilities at e0000 {
>>             compatible = "fsl,mpc8641-guts";
>>             reg = <0xe0000 0x1000>;
>>             fsl,has-rstcr;
>>         };
>>     };
>>
>>     chosen {
>>         linux,stdout-path = "/soc8641/serial0: serial at 4500";
>>     };
>> };
>>
>>
>>
>>
>> On Thu, Dec 26, 2013 at 2:37 PM, wyang <w90p710 at gmail.com> wrote:
>>
>>>  On 12/26/2013 01:09 PM, Ashish Khetan wrote:
>>>
>>>   Hi,
>>>  I was trying to port Linux-3.12 for MPC8641 based custom designed board
>>> for evaluation purpose. I have been facing a kernel bug at mpic
>>> initialization. Is somebody have faced this kind of bugs or can give me any
>>> pointer for further steps how to solve kernel bugs will be really helpful.
>>> here is the snapshot for the bug that may be helpful to address the bug.
>>> Using MPC86xx HPCN machine description
>>> Total memory = 512MB; using 1024kB for hash table (at cff00000)
>>> Linux version 3.12.0 (ashish at ashish-VirtualBox) (gcc version 4.7.2
>>> (GCC) ) #2 We
>>> d Dec 25 16:04:36 IST 2013
>>> Found initrd at 0xde975000:0xdfec428a
>>> bootconsole [udbg0] enabled
>>> setup_arch: bootmem
>>> mpc86xx_hpcn_setup_arch()
>>> MPC86xx HPCN board from Freescale Semiconductor
>>> arch: exit
>>> Zone ranges:
>>>   DMA      [mem 0x00000000-0x1fffffff]
>>>   Normal   empty
>>>   HighMem  empty
>>> Movable zone start for each node
>>> Early memory node ranges
>>>   node   0: [mem 0x00000000-0x1fffffff]
>>> Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
>>> 130048
>>> Kernel command line: root=/dev/ram0 rw rootfs console=ttyS0,115200
>>> PID hash table entries: 2048 (order: 1, 8192 bytes)
>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>> Sorting __ex_table...
>>> Memory: 424980K/524288K available (4172K kernel code, 208K rwdata, 1304K
>>> rodata,
>>>  196K init, 149K bss, 99308K reserved, 0K highmem)
>>> Kernel virtual memory layout:
>>>   * 0xfffcf000..0xfffff000  : fixmap
>>>   * 0xff800000..0xffc00000  : highmem PTEs
>>>   * 0xff7fe000..0xff800000  : early ioremap
>>>   * 0xe1000000..0xff7fe000  : vmalloc & ioremap
>>> SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>>> NR_IRQS:512 nr_irqs:512 16
>>> ------------[ cut here ]------------
>>> kernel BUG at arch/powerpc/platforms/86xx/pic.c:42!
>>>
>>>
>>> It hints that mpic_alloc() fails. Maybe, you should spend some time
>>> investigating why it fails. :-)
>>>
>>> Thanks
>>> Wei
>>>
>>>  Oops: Exception in kernel mode, sig: 5 [#1]
>>> MPC86xx HPCN
>>> Modules linked in:
>>> CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0 #2
>>> task: c05903e0 ti: c05b4000 task.ti: c05b4000
>>> NIP: c0567438 LR: c0567430 CTR: c0567400
>>> REGS: c05b5ee0 TRAP: 0700   Not tainted  (3.12.0)
>>> MSR: 00021032 <ME,IR,DR,RI>  CR: 24000042  XER: 20000000
>>>
>>> GPR00: c0567430 c05b5f90 c05903e0 00000000 c04e4ff8 c051e588 0000008f
>>> 00000002
>>> GPR08: c042789c 00000001 0000006f 00000000 22000048 bebffffd 11a7b4e5
>>> 200c8000
>>> GPR16: ffbeffff ffffffff 00000000 00000024 00000000 1fec56f8 1fec59a7
>>> 00000000
>>> GPR24: 00000000 1fff97e8 40000000 1ffcc6a0 c0bff080 c05c2490 c05c2628
>>> c0585b60
>>> NIP [c0567438] mpc86xx_init_irq+0x38/0x108
>>> LR [c0567430] mpc86xx_init_irq+0x30/0x108
>>> Call Trace:
>>> [c05b5f90] [c0567430] mpc86xx_init_irq+0x30/0x108 (unreliable)
>>> [c05b5fb0] [c0562784] init_IRQ+0x24/0x38
>>> [c05b5fc0] [c055fde4] start_kernel+0x1bc/0x2ec
>>> [c05b5ff0] [00003444] 0x3444
>>> Instruction dump:
>>> 3d00c04f 38800000 38a01002 38c00000 38e00100 39088f8c 38600000 90010024
>>> bfa10014 4bffec35 7c690034 5529d97e <0f090000> 3fa0c04f 4bfff391 38600000
>>> ---[ end trace 31fd0ba7d8756001 ]---
>>>
>>> Kernel panic - not syncing: Attempted to kill the idle task!
>>> Rebooting in 180 seconds..
>>>
>>>
>>>  Thanks & Regards
>>>  Ashish Khetan
>>>
>>>
>>> _______________________________________________
>>> Linuxppc-dev mailing listLinuxppc-dev at lists.ozlabs.orghttps://lists.ozlabs.org/listinfo/linuxppc-dev
>>>
>>>
>>>
>>
>> _______________________________________________
>> Kernelnewbies mailing list
>> Kernelnewbies at kernelnewbies.org
>> http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>>
>>
>
>
> --
> Regards,
> Sri.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20131227/d965eac4/attachment-0001.html>


More information about the Linuxppc-dev mailing list