May 2021 Archives by date
Starting: Sat May 1 04:59:56 AEST 2021
Ending: Mon May 31 15:23:19 AEST 2021
Messages: 315
- [PATCH 0/4] ARM: dts: aspeed: Rainier and Everest updates
Eddie James
- [PATCH 1/4] ARM: dts: aspeed: Rainier 1S4U: Fix fan channels
Eddie James
- [PATCH 2/4] ARM: dts: aspeed: Everest: Fix cable card PCA chips
Eddie James
- [PATCH 3/4] ARM: dts: aspeed: Rainier 4U: Remove fan updates
Eddie James
- [PATCH 4/4] ARM: dts: aspeed: Everest: Add directly controlled LEDs
Eddie James
- [PATCH v4 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro drivers
Rob Herring
- [PATCH v2 1/3] dt-bindings: mmc: sdhci-of-aspeed: Add description for AST2600 EVB.
Steven Lee
- [PATCH v2 2/3] ARM: dts: aspeed: ast2600evb: Add timing-phase property for eMMC controller
Steven Lee
- [PATCH v2 3/3] mmc: sdhci-of-aspeed: Sync capabilities from device tree to ast2600 SoC registers
Steven Lee
- Re: [PATCH v2 1/3] dt-bindings: mmc: sdhci-of-aspeed: Add description for AST2600 EVB.
Andrew Jeffery
- [v2 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- Re: [PATCH v2 3/3] mmc: sdhci-of-aspeed: Sync capabilities from device tree to ast2600 SoC registers
Andrew Jeffery
- Re: [PATCH v2 2/3] ARM: dts: aspeed: ast2600evb: Add timing-phase property for eMMC controller
Andrew Jeffery
- [v2 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- [v2 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [v2 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [PATCH v2 1/3] dt-bindings: mmc: sdhci-of-aspeed: Add description for AST2600 EVB.
Steven Lee
- Re: [PATCH v2 1/3] dt-bindings: mmc: sdhci-of-aspeed: Add description for AST2600 EVB.
Andrew Jeffery
- [PATCH v2 3/3] mmc: sdhci-of-aspeed: Sync capabilities from device tree to ast2600 SoC registers
Steven Lee
- [PATCH v2 2/3] ARM: dts: aspeed: ast2600evb: Add timing-phase property for eMMC controller
Steven Lee
- [PATCH v2 1/3] dt-bindings: mmc: sdhci-of-aspeed: Add description for AST2600 EVB.
Steven Lee
- Re: [PATCH v2 3/3] mmc: sdhci-of-aspeed: Sync capabilities from device tree to ast2600 SoC registers
Andrew Jeffery
- [PATCH v2 1/3] dt-bindings: mmc: sdhci-of-aspeed: Add description for AST2600 EVB.
Rob Herring
- [PATCH] EDAC: aspeed: print resource_size_t using %pa
Randy Dunlap
- [PATCH v2 1/3] dt-bindings: mmc: sdhci-of-aspeed: Add description for AST2600 EVB.
Steven Lee
- [PATCH] EDAC: aspeed: print resource_size_t using %pa
Andrew Jeffery
- [PATCH] EDAC: aspeed: print resource_size_t using %pa
Randy Dunlap
- [PATCH] EDAC: aspeed: print resource_size_t using %pa
Andrew Jeffery
- [PATCH v4 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro drivers
Quan Nguyen
- [v3 0/2] Support pwm driver for aspeed ast26xx
Billy Tsai
- [v3 1/2] dt-bindings: Add bindings for aspeed pwm-tach and pwm.
Billy Tsai
- [v3 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- [PATCH v3 0/5] mmc: sdhci-of-aspeed: Support toggling SD bus signal
Steven Lee
- [PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB
Steven Lee
- [PATCH v3 2/5] ARM: dts: aspeed: ast2600evb: Add comment for gpio regulator of sdhci
Steven Lee
- [PATCH v3 3/5] ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
Steven Lee
- [PATCH v3 4/5] mmc: sdhci-of-aspeed: Add a helper for updating capability register.
Steven Lee
- [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Steven Lee
- [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Philipp Zabel
- [PATCH v2] i2c: aspeed: disable additional device addresses on ast2[56]xx
Zev Weiss
- [PATCH v2] media: aspeed-video: ignore interrupts that aren't enabled
Zev Weiss
- [v3 0/2] Support pwm driver for aspeed ast26xx
Rob Herring
- [v3 1/2] dt-bindings: Add bindings for aspeed pwm-tach and pwm.
Rob Herring
- [PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB
Rob Herring
- Re: [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Andrew Jeffery
- Re: [PATCH v3 3/5] ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
Andrew Jeffery
- Re: [PATCH v3 2/5] ARM: dts: aspeed: ast2600evb: Add comment for gpio regulator of sdhci
Andrew Jeffery
- Re: [PATCH v3 4/5] mmc: sdhci-of-aspeed: Add a helper for updating capability register.
Andrew Jeffery
- [PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB
Steven Lee
- [PATCH v3 2/5] ARM: dts: aspeed: ast2600evb: Add comment for gpio regulator of sdhci
Steven Lee
- Re: [PATCH v3 2/5] ARM: dts: aspeed: ast2600evb: Add comment for gpio regulator of sdhci
Andrew Jeffery
- [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Steven Lee
- [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Steven Lee
- [PATCH v3 4/5] mmc: sdhci-of-aspeed: Add a helper for updating capability register.
Steven Lee
- Re: [PATCH v3 4/5] mmc: sdhci-of-aspeed: Add a helper for updating capability register.
Andrew Jeffery
- Re: [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Andrew Jeffery
- [PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB
Rob Herring
- [PATCH v2] i2c: aspeed: disable additional device addresses on ast2[56]xx
Brendan Higgins
- [PATCH 0/3] serial: 8250_aspeed_vuart: fix duplicate __release_region() on unbind
Zev Weiss
- [PATCH 1/3] serial: 8250_aspeed_vuart: factor out aspeed_vuart_{read, write}b() helper functions
Zev Weiss
- [PATCH 2/3] serial: 8250_aspeed_vuart: initialize vuart->port in aspeed_vuart_probe()
Zev Weiss
- [PATCH 3/3] serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping
Zev Weiss
- [PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB
Steven Lee
- [PATCH v3 00/16] ipmi: Allow raw access to KCS devices
Andrew Jeffery
- [PATCH v3 01/16] ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
Andrew Jeffery
- [PATCH v3 02/16] ipmi: kcs_bmc: Make status update atomic
Andrew Jeffery
- [PATCH v3 03/16] ipmi: kcs_bmc: Rename {read, write}_{status, data}() functions
Andrew Jeffery
- [PATCH v3 04/16] ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
Andrew Jeffery
- [PATCH v3 05/16] ipmi: kcs_bmc: Turn the driver data-structures inside-out
Andrew Jeffery
- [PATCH v3 06/16] ipmi: kcs_bmc: Split headers into device and client
Andrew Jeffery
- [PATCH v3 07/16] ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
Andrew Jeffery
- [PATCH v3 08/16] ipmi: kcs_bmc: Decouple the IPMI chardev from the core
Andrew Jeffery
- [PATCH v3 09/16] ipmi: kcs_bmc: Allow clients to control KCS IRQ state
Andrew Jeffery
- [PATCH v3 10/16] ipmi: kcs_bmc: Don't enforce single-open policy in the kernel
Andrew Jeffery
- [PATCH v3 11/16] ipmi: kcs_bmc: Add serio adaptor
Andrew Jeffery
- [PATCH v3 12/16] dt-bindings: ipmi: Convert ASPEED KCS binding to schema
Andrew Jeffery
- [PATCH v3 13/16] dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
Andrew Jeffery
- [PATCH v3 14/16] ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
Andrew Jeffery
- [PATCH v3 15/16] ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
Andrew Jeffery
- [PATCH v3 16/16] ipmi: kcs_bmc_aspeed: Optionally apply status address
Andrew Jeffery
- [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Steven Lee
- [v4 0/2] Support pwm driver for aspeed ast26xx
Billy Tsai
- [v4 1/2] dt-bindings: Add bindings for aspeed pwm-tach.
Billy Tsai
- [v4 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- [v4 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [v4 1/2] dt-bindings: Add bindings for aspeed pwm-tach.
Rob Herring
- [PATCH] watchdog: Use sysfs_emit() and sysfs_emit_at() in "show" functions
Juerg Haefliger
- [PATCH] watchdog: Use sysfs_emit() and sysfs_emit_at() in "show" functions
Guenter Roeck
- [PATCH net-next] net: mdio: Add missing MODULE_DEVICE_TABLE
Zou Wei
- [PATCH net-next] net: mdio: Add missing MODULE_DEVICE_TABLE
Joel Stanley
- [PATCH net-next] net: mdio: Add missing MODULE_DEVICE_TABLE
Andrew Lunn
- Re: [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Andrew Jeffery
- Re: [PATCH 1/3] serial: 8250_aspeed_vuart: factor out aspeed_vuart_{read, write}b() helper functions
Andrew Jeffery
- Re: [PATCH 2/3] serial: 8250_aspeed_vuart: initialize vuart->port in aspeed_vuart_probe()
Andrew Jeffery
- [PATCH] watchdog: Use sysfs_emit() and sysfs_emit_at() in "show" functions
Joe Perches
- [PATCH -next] fsi: Add missing MODULE_DEVICE_TABLE
Zou Wei
- [PATCH 2/3] serial: 8250_aspeed_vuart: initialize vuart->port in aspeed_vuart_probe()
Zev Weiss
- [PATCH v2 06/10] mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
David Gow
- Re: [PATCH v2 06/10] mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
Andrew Jeffery
- Re: [PATCH 2/3] serial: 8250_aspeed_vuart: initialize vuart->port in aspeed_vuart_probe()
Andrew Jeffery
- [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Steven Lee
- Re: [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Andrew Jeffery
- [v5 0/2] Support pwm driver for aspeed ast26xx
Billy Tsai
- [v5 1/2] dt-bindings: Add bindings for aspeed pwm-tach.
Billy Tsai
- [v5 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- [v5 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [v5 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- [PATCH 0/3] Add support PSU and OCP card on Mt. Jade BMC
Quan Nguyen
- [PATCH 1/3] ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
Quan Nguyen
- [PATCH 2/3] ARM: dts: aspeed: mtjade: Add PSU support
Quan Nguyen
- [PATCH 3/3] ARM: dts: aspeed: mtjade: switch to 64MB flash layout
Quan Nguyen
- [v5 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [v5 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- [v5 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [v5 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- [PATCH v2 06/10] mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
Ulf Hansson
- [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Andrew Jeffery
- [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Greg KH
- [v5 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [PATCH v4 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro drivers
Quan Nguyen
- [v6 0/2] Support pwm driver for aspeed ast26xx
Billy Tsai
- [v6 1/2] dt-bindings: Add bindings for aspeed pwm-tach.
Billy Tsai
- [v6 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- Re: [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Andrew Jeffery
- [PATCH v2 06/10] mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
David Gow
- [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Greg Kroah-Hartman
- [PATCH] EDAC/aspeed: use proper format string for printing resource
Borislav Petkov
- Re: [PATCH] tty: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Andrew Jeffery
- [PATCH v2 0/2] serial: 8250: Mitigate Tx stall risk for Aspeed VUARTs
Andrew Jeffery
- [PATCH v2 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Andrew Jeffery
- [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
Andrew Jeffery
- [PATCH] pinctrl: aspeed: Fix minor documentation error
Linus Walleij
- [PATCH v2 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Joel Stanley
- Re: [PATCH v2 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Andrew Jeffery
- [PATCH v2 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Jiri Slaby
- [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
Jiri Slaby
- [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
Andrew Jeffery
- [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
Jiri Slaby
- [PATCH v2 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
Andrew Jeffery
- [PATCH v3 0/7] Add Aspeed SSIF BMC driver
Quan Nguyen
- [PATCH v3 1/7] i2c: i2c-core-smbus: Expose PEC calculate function for generic use
Quan Nguyen
- [PATCH v3 2/7] ipmi: ssif_bmc: Add SSIF BMC driver
Quan Nguyen
- [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
Quan Nguyen
- [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
Quan Nguyen
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Quan Nguyen
- [PATCH v3 6/7] ipmi: ssif_bmc: Add Aspeed SSIF BMC driver
Quan Nguyen
- [PATCH v3 7/7] bindings: ipmi: Add binding for Aspeed SSIF BMC driver
Quan Nguyen
- [PATCH 0/3] i2c: aspeed: avoid new registers definition of AST2600
Jamin Lin
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Jamin Lin
- [PATCH 2/3] ARM: dts: aspeed: Add node for AST2600 I2C
Jamin Lin
- [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format
Jamin Lin
- [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Steven Lee
- [PATCH v3 2/7] ipmi: ssif_bmc: Add SSIF BMC driver
Corey Minyard
- [PATCH v3 0/7] Add Aspeed SSIF BMC driver
Corey Minyard
- [PATCH v3 7/7] bindings: ipmi: Add binding for Aspeed SSIF BMC driver
Rob Herring
- [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format
Rob Herring
- [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format
Rob Herring
- [PATCH v4 4/4] i2c: aspeed: add DMA mode transfer support
Jae Hyun Yoo
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Zev Weiss
- [v6 1/2] dt-bindings: Add bindings for aspeed pwm-tach.
Rob Herring
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Joel Stanley
- Re: [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Andrew Jeffery
- [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
Joel Stanley
- [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
Joel Stanley
- [v6 1/2] dt-bindings: Add bindings for aspeed pwm-tach.
Billy Tsai
- [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
Guenter Roeck
- [PATCH v3 0/2] serial: 8250: Mitigate Tx stall risk for Aspeed VUARTs
Andrew Jeffery
- [PATCH v3 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Andrew Jeffery
- [PATCH v3 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
Andrew Jeffery
- [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format
Jamin Lin
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Jamin Lin
- [PATCH v3 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
Jiri Slaby
- [PATCH v3 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
Jiri Slaby
- [PATCH v3 1/2] serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
ChiaWei Wang
- [PATCH] watchdog: Use sysfs_emit() and sysfs_emit_at() in "show" functions
Juerg Haefliger
- [PATCH v3 00/16] ipmi: Allow raw access to KCS devices
Andrew Jeffery
- [PATCH v4 0/3] mmc: sdhci-of-aspeed: Support toggling SD bus signal
Steven Lee
- [PATCH v4 1/3] ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Steven Lee
- [PATCH v4 2/3] ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
Steven Lee
- [PATCH v4 3/3] mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.
Steven Lee
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Ryan Chen
- [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
Ryan Chen
- [PATCH v3 00/16] ipmi: Allow raw access to KCS devices
Corey Minyard
- [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
Quan Nguyen
- [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
Quan Nguyen
- [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
Quan Nguyen
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Quan Nguyen
- [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
Quan Nguyen
- [PATCH v3 2/7] ipmi: ssif_bmc: Add SSIF BMC driver
Quan Nguyen
- [PATCH v3 0/7] Add Aspeed SSIF BMC driver
Quan Nguyen
- [PATCH v3 7/7] bindings: ipmi: Add binding for Aspeed SSIF BMC driver
Quan Nguyen
- [PATCH v4 2/3] ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
Joel Stanley
- Re: [PATCH v4 3/3] mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.
Andrew Jeffery
- [PATCH v4 1/3] ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Joel Stanley
- [PATCH v4 3/3] mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.
Joel Stanley
- [PATCH] watchdog: aspeed: fix hardware timeout calculation
Tao Ren
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Tao Ren
- [PATCH v2] i2c: aspeed: disable additional device addresses on ast2[56]xx
Joel Stanley
- [PATCH] watchdog: aspeed: fix hardware timeout calculation
Guenter Roeck
- [PATCH] watchdog: aspeed: fix hardware timeout calculation
Tao Ren
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Ryan Chen
- [PATCH v3 01/16] ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
Zev Weiss
- [PATCH v3 06/16] ipmi: kcs_bmc: Split headers into device and client
Zev Weiss
- [PATCH v3 07/16] ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
Zev Weiss
- [PATCH v3 08/16] ipmi: kcs_bmc: Decouple the IPMI chardev from the core
Zev Weiss
- [PATCH v3 09/16] ipmi: kcs_bmc: Allow clients to control KCS IRQ state
Zev Weiss
- [PATCH v3 11/16] ipmi: kcs_bmc: Add serio adaptor
Zev Weiss
- [PATCH v3 14/16] ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
Zev Weiss
- [PATCH 11/11] drm/tiny: drm_gem_simple_display_pipe_prepare_fb is the default
Daniel Vetter
- [PATCH 11/11] drm/tiny: drm_gem_simple_display_pipe_prepare_fb is the default
David Lechner
- [PATCH 11/11] drm/tiny: drm_gem_simple_display_pipe_prepare_fb is the default
Noralf Trønnes
- [PATCH 11/11] drm/tiny: drm_gem_simple_display_pipe_prepare_fb is the default
Oleksandr Andrushchenko
- [PATCH v3 05/16] ipmi: kcs_bmc: Turn the driver data-structures inside-out
Corey Minyard
- [PATCH v3 10/16] ipmi: kcs_bmc: Don't enforce single-open policy in the kernel
Corey Minyard
- [PATCH v3 00/16] ipmi: Allow raw access to KCS devices
Corey Minyard
- [v6 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [PATCH v3 00/16] ipmi: Allow raw access to KCS devices
Andrew Jeffery
- Re: [PATCH v3 10/16] ipmi: kcs_bmc: Don't enforce single-open policy in the kernel
Andrew Jeffery
- Re: [PATCH v3 05/16] ipmi: kcs_bmc: Turn the driver data-structures inside-out
Andrew Jeffery
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Jamin Lin
- [v6 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Jamin Lin
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Joel Stanley
- [PATCH v4 1/3] ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Steven Lee
- [PATCH v4 1/3] ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Joel Stanley
- [PATCH v4 1/3] ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Steven Lee
- [PATCH v5 0/4] mmc: sdhci-of-aspeed: Support toggling SD bus signal
Steven Lee
- [PATCH v5 1/4] ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Steven Lee
- [PATCH v5 2/4] ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
Steven Lee
- [PATCH v5 3/4] ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0.
Steven Lee
- [PATCH v5 4/4] mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.
Steven Lee
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Ryan Chen
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Quan Nguyen
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Ryan Chen
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Quan Nguyen
- [v6 2/2] pwm: Add Aspeed ast2600 PWM support
Uwe Kleine-König
- [PATCH v1 0/3] pinctrl: pinctrl-g6: Add the 2nd sgpio
Steven Lee
- [PATCH v1 1/3] dt-bindings: pinctrl: Update enum for adding SGPM2 and SGPS2
Steven Lee
- [PATCH v1 2/3] ARM: dts: aspeed-g6: Add pinctrl settings
Steven Lee
- [PATCH v1 3/3] pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
Steven Lee
- [PATCH v5 4/4] mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.
Ulf Hansson
- [Openipmi-developer] [PATCH v3 05/16] ipmi: kcs_bmc: Turn the driver data-structures inside-out
Corey Minyard
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Zev Weiss
- Re: [Openipmi-developer] [PATCH v3 05/16] ipmi: kcs_bmc: Turn the driver data-structures inside-out
Andrew Jeffery
- Re: [PATCH v1 3/3] pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
Andrew Jeffery
- Re: [PATCH v1 1/3] dt-bindings: pinctrl: Update enum for adding SGPM2 and SGPS2
Andrew Jeffery
- [PATCH v1 2/3] ARM: dts: aspeed-g6: Add pinctrl settings
Andrew Jeffery
- Re: [PATCH v5 1/4] ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Andrew Jeffery
- Re: [PATCH v5 3/4] ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0.
Andrew Jeffery
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Jamin Lin
- [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
Jamin Lin
- [PATCH v1 3/3] pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
Steven Lee
- Re: [PATCH v1 3/3] pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
Andrew Jeffery
- [PATCH v2 0/3] pinctrl: pinctrl-g6: Add the 2nd sgpio
Steven Lee
- [PATCH v2 1/3] dt-bindings: pinctrl: Update enum for adding SGPM2 and SGPS2
Steven Lee
- [PATCH v2 2/3] ARM: dts: aspeed-g6: Add pinctrl settings
Steven Lee
- [PATCH v2 3/3] pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
Steven Lee
- [v7 0/2] Support pwm driver for aspeed ast26xx
Billy Tsai
- [v7 1/2] dt-bindings: Add bindings for aspeed pwm-tach.
Billy Tsai
- [v7 2/2] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
- Re: [PATCH v2 3/3] pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
Andrew Jeffery
- [PATCH v3 0/3] pinctrl: pinctrl-g6: Add the 2nd sgpio
Steven Lee
- [PATCH v3 1/3] dt-bindings: pinctrl: Update enum for adding SGPM2 and SGPS2
Steven Lee
- [PATCH v3 2/3] ARM: dts: aspeed-g6: Add pinctrl settings
Steven Lee
- [PATCH v3 3/3] pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
Steven Lee
- [PATCH v3 2/3] ARM: dts: aspeed-g6: Add pinctrl settings
Joel Stanley
- [PATCH v5 0/4] mmc: sdhci-of-aspeed: Support toggling SD bus signal
Joel Stanley
- [PATCH v5 0/4] mmc: sdhci-of-aspeed: Support toggling SD bus signal
Steven Lee
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Ryan Chen
- [PATCH v5 0/4] mmc: sdhci-of-aspeed: Support toggling SD bus signal
Joel Stanley
- [PATCH 11/11] drm/tiny: drm_gem_simple_display_pipe_prepare_fb is the default
Daniel Vetter
- Re: [PATCH v5 0/4] mmc: sdhci-of-aspeed: Support toggling SD bus signal
Andrew Jeffery
- [PATCH] ARM: dts: aspeed: Set earlycon boot argument
Joel Stanley
- [PATCH v1 0/4] ASPEED sgpio driver enhancement.
Steven Lee
- [PATCH v1 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Steven Lee
- [PATCH v1 2/4] ARM: dts: aspeed-g6: Add SGPIO node.
Steven Lee
- [PATCH v1 3/4] ARM: dts: aspeed-g5: Modify sgpio node for the enhanced sgpio driver.
Steven Lee
- [PATCH v1 4/4] gpio: gpio-aspeed-sgpio: Add AST2600 sgpio support
Steven Lee
- [PATCH v1 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Rob Herring
- [PATCH v2 0/4] ASPEED sgpio driver enhancement.
Steven Lee
- [PATCH v2 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Steven Lee
- [PATCH v2 2/4] ARM: dts: aspeed-g6: Add SGPIO node.
Steven Lee
- [PATCH v2 3/4] ARM: dts: aspeed-g5: Modify sgpio node for the enhanced sgpio driver.
Steven Lee
- [PATCH v2 4/4] gpio: gpio-aspeed-sgpio: Add AST2600 sgpio support
Steven Lee
- Re: [PATCH v1 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Andrew Jeffery
- [PATCH v1 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Steven Lee
- [PATCH v1 4/4] gpio: gpio-aspeed-sgpio: Add AST2600 sgpio support
Andrew Jeffery
- [PATCH v1 2/4] ARM: dts: aspeed-g6: Add SGPIO node.
Andrew Jeffery
- [PATCH] ARM: dts: aspeed: Set earlycon boot argument
Andrew Jeffery
- [PATCH v2 0/4] ASPEED sgpio driver enhancement.
Andrew Jeffery
- [PATCH v1 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Jeremy Kerr
- [PATCH v1 4/4] gpio: gpio-aspeed-sgpio: Add AST2600 sgpio support
Steven Lee
- [PATCH v2 0/4] ASPEED sgpio driver enhancement.
Steven Lee
- [PATCH v1 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Steven Lee
- [PATCH v1 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Steven Lee
- [PATCH v1 4/4] gpio: gpio-aspeed-sgpio: Add AST2600 sgpio support
Andrew Jeffery
- [PATCH v1 2/4] ARM: dts: aspeed-g6: Add SGPIO node.
Steven Lee
- [PATCH] ARM: dts: aspeed: Set earlycon boot argument
Alexander A. Filippov
- [PATCH v2 0/1] dt-bindings-aspeed-i2 Convert to yaml format
Jamin Lin
- [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
Jamin Lin
- [PATCH v2] i2c: aspeed: disable additional device addresses on ast2[56]xx
Wolfram Sang
- Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
Andrew Jeffery
- [PATCH v3 1/3] dt-bindings: pinctrl: Update enum for adding SGPM2 and SGPS2
Linus Walleij
- [PATCH v3 3/3] pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
Linus Walleij
- [PATCH v3 2/3] ARM: dts: aspeed-g6: Add pinctrl settings
Linus Walleij
- [PATCH v2 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Linus Walleij
- [PATCH 11/11] drm/tiny: drm_gem_simple_display_pipe_prepare_fb is the default
Linus Walleij
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Quan Nguyen
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Quan Nguyen
- [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
Jamin Lin
- [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
Ryan Chen
- [PATCH v2 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Steven Lee
- [PATCH v2 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Linus Walleij
- [PATCH v4 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro drivers
Quan Nguyen
- [PATCH v2 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
Steven Lee
Last message date:
Mon May 31 15:23:19 AEST 2021
Archived on: Mon May 31 15:24:13 AEST 2021
This archive was generated by
Pipermail 0.09 (Mailman edition).