[PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB

Steven Lee steven_lee at aspeedtech.com
Thu May 6 20:03:08 AEST 2021


AST2600-A2 EVB has the reference design for enabling SD bus
power and toggling SD bus signal voltage by GPIO pins.

In the reference design, GPIOV0 of AST2600-A2 EVB is connected to
power load switch that providing 3.3v to SD1 bus vdd. GPIOV1 is
connected to a 1.8v and a 3.3v power load switch that providing
signal voltage to
SD1 bus.

If GPIOV0 is active high, SD1 bus is enabled. Otherwise, SD1 bus is
disabled.
If GPIOV1 is active high, 3.3v power load switch is enabled, SD1
signal voltage is 3.3v. Otherwise, 1.8v power load switch will be
enabled, SD1 signal voltage becomes 1.8v.

AST2600-A2 EVB also support toggling signal voltage for SD2 bus.
The design is the same as SD1 bus. It uses GPIOV2 as power-gpio and
GPIOV3 as power-switch-gpio.

Signed-off-by: Steven Lee <steven_lee at aspeedtech.com>
---
 .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 101 +++++++++++++++++-
 1 file changed, 97 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
index 987b287f3bff..de7e61b3d37a 100644
--- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -45,10 +45,16 @@ patternProperties:
 
     properties:
       compatible:
-        enum:
-          - aspeed,ast2400-sdhci
-          - aspeed,ast2500-sdhci
-          - aspeed,ast2600-sdhci
+        oneOf:
+          - items:
+              - enum:
+                  - aspeed,ast2400-sdhci
+                  - aspeed,ast2500-sdhci
+                  - aspeed,ast2600-sdhci
+          - items:
+              - enum:
+                  - aspeed,ast2600-sdhci
+              - const: sdhci
       reg:
         maxItems: 1
         description: The SDHCI registers
@@ -104,3 +110,90 @@ examples:
                     clocks = <&syscon ASPEED_CLK_SDIO>;
             };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/aspeed-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    vcc_sdhci0: regulator-vcc-sdhci0 {
+            compatible = "regulator-fixed";
+            regulator-name = "SDHCI0 Vcc";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            gpios = <&gpio0 168
+                            GPIO_ACTIVE_HIGH>;
+            enable-active-high;
+    };
+
+    vccq_sdhci0: regulator-vccq-sdhci0 {
+            compatible = "regulator-gpio";
+
+            regulator-name = "SDHCI0 VccQ";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <3300000>;
+            gpios = <&gpio0 169
+                            GPIO_ACTIVE_HIGH>;
+            gpios-states = <1>;
+            states = <3300000 1>,
+                     <1800000 0>;
+    };
+
+    vcc_sdhci1: regulator-vcc-sdhci1 {
+            compatible = "regulator-fixed";
+
+            regulator-name = "SDHCI1 Vcc";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            gpios = <&gpio0 170
+                            GPIO_ACTIVE_HIGH>;
+            enable-active-high;
+    };
+
+    vccq_sdhci1: regulator-vccq-sdhci1 {
+            compatible = "regulator-gpio";
+
+            regulator-name = "SDHCI1 VccQ";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <3300000>;
+            gpios = <&gpio0 171
+                            GPIO_ACTIVE_HIGH>;
+            gpios-states = <1>;
+            states = <3300000 1>,
+                     <1800000 0>;
+    };
+
+    sdc at 1e740000 {
+            compatible = "aspeed,ast2600-sd-controller";
+            reg = <0x1e740000 0x100>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x1e740000 0x20000>;
+            clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+
+            sdhci at 1e740100 {
+                    compatible = "aspeed,ast2600-sdhci","sdhci";
+                    reg = <0x100 0x100>;
+                    interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+                    vmmc-supply = <&vcc_sdhci0>;
+                    vqmmc-supply = <&vccq_sdhci0>;
+                    sd-uhs-sdr104;
+                    clk-phase-uhs-sdr104 = <180>, <180>;
+            };
+
+            sdhci at 1e740200 {
+                    compatible = "aspeed,ast2600-sdhci","sdhci";
+                    reg = <0x200 0x100>;
+                    interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+                    vmmc-supply = <&vcc_sdhci1>;
+                    vqmmc-supply = <&vccq_sdhci1>;
+                    sd-uhs-sdr104;
+                    clk-phase-uhs-sdr104 = <0>, <0>;
+            };
+    };
+
+...
-- 
2.17.1



More information about the Linux-aspeed mailing list