[PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB
Rob Herring
robh at kernel.org
Fri May 7 11:13:24 AEST 2021
On Thu, May 06, 2021 at 06:03:08PM +0800, Steven Lee wrote:
> AST2600-A2 EVB has the reference design for enabling SD bus
> power and toggling SD bus signal voltage by GPIO pins.
>
> In the reference design, GPIOV0 of AST2600-A2 EVB is connected to
> power load switch that providing 3.3v to SD1 bus vdd. GPIOV1 is
> connected to a 1.8v and a 3.3v power load switch that providing
> signal voltage to
> SD1 bus.
>
> If GPIOV0 is active high, SD1 bus is enabled. Otherwise, SD1 bus is
> disabled.
> If GPIOV1 is active high, 3.3v power load switch is enabled, SD1
> signal voltage is 3.3v. Otherwise, 1.8v power load switch will be
> enabled, SD1 signal voltage becomes 1.8v.
>
> AST2600-A2 EVB also support toggling signal voltage for SD2 bus.
> The design is the same as SD1 bus. It uses GPIOV2 as power-gpio and
> GPIOV3 as power-switch-gpio.
>
> Signed-off-by: Steven Lee <steven_lee at aspeedtech.com>
> ---
> .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 101 +++++++++++++++++-
> 1 file changed, 97 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> index 987b287f3bff..de7e61b3d37a 100644
> --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> @@ -45,10 +45,16 @@ patternProperties:
>
> properties:
> compatible:
> - enum:
> - - aspeed,ast2400-sdhci
> - - aspeed,ast2500-sdhci
> - - aspeed,ast2600-sdhci
> + oneOf:
> + - items:
> + - enum:
> + - aspeed,ast2400-sdhci
> + - aspeed,ast2500-sdhci
> + - aspeed,ast2600-sdhci
> + - items:
> + - enum:
> + - aspeed,ast2600-sdhci
> + - const: sdhci
Why are you adding 'sdhci'. That's not useful as a compatible given how
many quirks different implementations have.
> reg:
> maxItems: 1
> description: The SDHCI registers
> @@ -104,3 +110,90 @@ examples:
> clocks = <&syscon ASPEED_CLK_SDIO>;
> };
> };
> +
> + - |
Why do we need another example?
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/clock/aspeed-clock.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + vcc_sdhci0: regulator-vcc-sdhci0 {
> + compatible = "regulator-fixed";
> + regulator-name = "SDHCI0 Vcc";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpios = <&gpio0 168
> + GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + vccq_sdhci0: regulator-vccq-sdhci0 {
> + compatible = "regulator-gpio";
> +
> + regulator-name = "SDHCI0 VccQ";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + gpios = <&gpio0 169
> + GPIO_ACTIVE_HIGH>;
> + gpios-states = <1>;
> + states = <3300000 1>,
> + <1800000 0>;
> + };
> +
> + vcc_sdhci1: regulator-vcc-sdhci1 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "SDHCI1 Vcc";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpios = <&gpio0 170
> + GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + vccq_sdhci1: regulator-vccq-sdhci1 {
> + compatible = "regulator-gpio";
> +
> + regulator-name = "SDHCI1 VccQ";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + gpios = <&gpio0 171
> + GPIO_ACTIVE_HIGH>;
> + gpios-states = <1>;
> + states = <3300000 1>,
> + <1800000 0>;
> + };
> +
> + sdc at 1e740000 {
> + compatible = "aspeed,ast2600-sd-controller";
> + reg = <0x1e740000 0x100>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x1e740000 0x20000>;
> + clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
> +
> + sdhci at 1e740100 {
> + compatible = "aspeed,ast2600-sdhci","sdhci";
> + reg = <0x100 0x100>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + sdhci,auto-cmd12;
> + clocks = <&syscon ASPEED_CLK_SDIO>;
> + vmmc-supply = <&vcc_sdhci0>;
> + vqmmc-supply = <&vccq_sdhci0>;
> + sd-uhs-sdr104;
> + clk-phase-uhs-sdr104 = <180>, <180>;
> + };
> +
> + sdhci at 1e740200 {
> + compatible = "aspeed,ast2600-sdhci","sdhci";
> + reg = <0x200 0x100>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> + sdhci,auto-cmd12;
> + clocks = <&syscon ASPEED_CLK_SDIO>;
> + vmmc-supply = <&vcc_sdhci1>;
> + vqmmc-supply = <&vccq_sdhci1>;
> + sd-uhs-sdr104;
> + clk-phase-uhs-sdr104 = <0>, <0>;
> + };
> + };
> +
> +...
> --
> 2.17.1
>
More information about the Linux-aspeed
mailing list