October 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Oct 1 00:56:25 AEST 2015
Ending: Fri Oct 30 15:36:30 AEDT 2015
Messages: 142

• [Skiboot] [PATCH] sensor: add a compatible property   Cédric Le Goater
• [Skiboot] [PATCH 1/2] PHB3: Retry fundamental reset   Gavin Shan
  • [Skiboot] [PATCH 2/2] PHB3: Remove unnecessary message in phb3_sm_fundamental_reset()   Gavin Shan
  • [Skiboot] [PATCH 1/2] PHB3: Retry fundamental reset   Stewart Smith
• [Skiboot] [PATCH 2/2] centaur: Add indirect XSCOM support   Stewart Smith
• [Skiboot] skiboot-5.1.5 tagged!   Stewart Smith
• [Skiboot] [PATCH] occ: hbrt: Change the OCC reset order   Shilpasri G Bhat
  • [Skiboot] [PATCH] occ: hbrt: Change the OCC reset order   Stewart Smith
    • [Skiboot] [PATCH] occ: hbrt: Change the OCC reset order   Shilpasri G Bhat
    • [Skiboot] [PATCH] occ: hbrt: Change the OCC reset order   Patrick Williams
• [Skiboot] [PATCH] PHB3: Fix unexpected ER (all) on errinjct by PCI config   Gavin Shan
  • [Skiboot] [PATCH] PHB3: Fix unexpected ER (all) on errinjct by PCI config   Stewart Smith
• [Skiboot] [PATCH] opal/hmi: Fix the soft lockup issue on HMI for certain TB errors.   Mahesh J Salgaonkar
  • [Skiboot] [PATCH] opal/hmi: Fix the soft lockup issue on HMI for certain TB errors.   Benjamin Herrenschmidt
    • [Skiboot] [PATCH] opal/hmi: Fix the soft lockup issue on HMI for certain TB errors.   Mahesh Jagannath Salgaonkar
      • [Skiboot] [PATCH] opal/hmi: Fix the soft lockup issue on HMI for certain TB errors.   Benjamin Herrenschmidt
• [Skiboot] [PATCH v2] opal/hmi: Fix the soft lockup issue on HMI for certain TB errors.   Mahesh J Salgaonkar
  • [Skiboot] [PATCH v2] opal/hmi: Fix the soft lockup issue on HMI for certain TB errors.   Stewart Smith
• [Skiboot] [PATCH] Ensure we run pollers in cpu_wait_job()   Stewart Smith
  • [Skiboot] [PATCH] Ensure we run pollers in cpu_wait_job()   Patrick Williams
    • [Skiboot] [PATCH] Ensure we run pollers in cpu_wait_job()   Patrick Williams
      • [Skiboot] [PATCH] Ensure we run pollers in cpu_wait_job()   Stewart Smith
      • [Skiboot] [PATCH] Ensure we run pollers in cpu_wait_job()   Patrick Williams
      • [Skiboot] [PATCH] Ensure we run pollers in cpu_wait_job()   Stewart Smith
• [Skiboot] [PATCH] hw/bt.c: Check for timeout after checking for message response   Alistair Popple
  • [Skiboot] [PATCH] hw/bt.c: Check for timeout after checking for message response   Stewart Smith
• [Skiboot] Skiboot stable tree   Stewart Smith
• [Skiboot] [PATCH] hw/fake-rtc: Add support for emulated rtc clock   Stewart Smith
  • [Skiboot] [PATCH] hw/fake-rtc: Add support for emulated rtc clock   Stewart Smith
• [Skiboot] [PATCH v3] chiptod: chiptod code improvements   Stewart Smith
• [Skiboot] [PATCH] pci: Use a fixed numbering of PHBs on OPAL and improve log consistency   Stewart Smith
• [Skiboot] skiboot-5.1.6 released   Stewart Smith
• [Skiboot] [PATCH v2] interrupts: Convert P8 IRQ assignment to functions   Stewart Smith
• [Skiboot] [PATCH] hw/bt.c: Timeout messages when bt interface isn't functional   Stewart Smith
• [Skiboot] [PATCH 1/2] PCI: Introduce config register filter   Stewart Smith
• [Skiboot] [PATCH 2/2] PHB3: Emulate root complex pref 64-bits window   Stewart Smith
• [Skiboot] [PATCH STABLE 2.1.1.1] hw/fsp/fsp-leds.c: use allocated buffer for FSP_CMD_GET_LED_LIST response   Stewart Smith
  • [Skiboot] [PATCH STABLE 2.1.1.1] hw/fsp/fsp-leds.c: use allocated buffer for FSP_CMD_GET_LED_LIST response   Vasant Hegde
    • [Skiboot] [PATCH STABLE 2.1.1.1] hw/fsp/fsp-leds.c: use allocated buffer for FSP_CMD_GET_LED_LIST response   Stewart Smith
    • [Skiboot] [PATCH STABLE 2.1.1.1] hw/fsp/fsp-leds.c: use allocated buffer for FSP_CMD_GET_LED_LIST response   Vasant Hegde
      • [Skiboot] [PATCH STABLE 2.1.1.1] hw/fsp/fsp-leds.c: use allocated buffer for FSP_CMD_GET_LED_LIST response   Stewart Smith
• [Skiboot] [PATCH] opal-prd: Improve error-checking in hservices_init   Jeremy Kerr
  • [Skiboot] [PATCH] opal-prd: Improve error-checking in hservices_init   Stewart Smith
• [Skiboot] skiboot-5.1.7 tagged and released   Stewart Smith
• [Skiboot] [PATCH v3 0/2] External tests   Cyril Bur
  • [Skiboot] [PATCH v3 1/2] external/test: Create an external test harness   Cyril Bur
  • [Skiboot] [PATCH v3 2/2] external/gard/tests: Add tests for the gard tool   Cyril Bur
  • [Skiboot] [PATCH v3 0/2] External tests   Stewart Smith
• [Skiboot] [PATCH] external/pflash: Add (C) header   Cyril Bur
  • [Skiboot] [PATCH] external/pflash: Add (C) header   Stewart Smith
    • [Skiboot] [PATCH] external/pflash: Add (C) header   Cyril Bur
    • [Skiboot] [PATCH] external/pflash: Add (C) header   Vasant Hegde
• [Skiboot] [PATCH] Fix strcat onto uninit string for pci location code   Stewart Smith
• [Skiboot] [PATCH 0/7] Bring gard tool inline with pflash   Cyril Bur
  • [Skiboot] [PATCH 0/7] Bring gard tool inline with pflash   Stewart Smith
• [Skiboot] [PATCH 1/7] external/common: Don't just expect `sh` to be in $PATH   Cyril Bur
• [Skiboot] [PATCH 2/7] external/pflash: Fixup LDFLAGS   Cyril Bur
• [Skiboot] [PATCH 3/7] external/gard: Update gard building to use external/common files   Cyril Bur
• [Skiboot] [PATCH 4/7] external/tests: Add ability to strip version string from result   Cyril Bur
• [Skiboot] [PATCH 5/7] external/gard: Add version information   Cyril Bur
• [Skiboot] [PATCH 6/7] external/gard: Make use of the common/ flash reading code   Cyril Bur
• [Skiboot] [PATCH 7/7] external/gard: Add make dist   Cyril Bur
• [Skiboot] [PATCH] hw/phb3: phb3_set_capi_mode(): remove duplicated code   Andrew Donnellan
  • [Skiboot] [PATCH] hw/phb3: phb3_set_capi_mode(): remove duplicated code   Stewart Smith
• [Skiboot] [PATCH] fsp/dpo: DPO driver code improvements   Stewart Smith
• [Skiboot] [PATCH] firestone: fix spacing in slot name   Jeremy Kerr
  • [Skiboot] [PATCH] firestone: fix spacing in slot name   Stewart Smith
• [Skiboot] [RFC PATCH] IPMI: Enable synchronous eSEL logging option   Vasant Hegde
• [Skiboot] [PATCH] SEL: Fix eSEL ID while logging eSEL event   Vasant Hegde
• [Skiboot] [PATCH] fsp/rtc: consider TOD_RESET status as a permanent error   Cédric Le Goater
  • [Skiboot] [PATCH] fsp/rtc: consider TOD_RESET status as a permanent error   Cédric Le Goater
• [Skiboot] [PATCH v2] fsp/rtc: ignore TOD_RESET status   Cédric Le Goater
• [Skiboot] RTAS: Processor module info   Sukadev Bhattiprolu
  • [Skiboot] RTAS: Processor module info   Sukadev Bhattiprolu
• [Skiboot] [PATCH 0/6] Add Nvlink support   Alistair Popple
  • [Skiboot] [PATCH 1/6] PCI: Cache PCI device IDs   Alistair Popple
  • [Skiboot] [PATCH 2/6] PCI: Trace device node from PCI device   Alistair Popple
  • [Skiboot] [PATCH 3/6] include/bitutils.h: Add macros for 16-bit constants   Alistair Popple
  • [Skiboot] [PATCH 4/6] include/pci-cfg.h: Add PCI vendor specific capability definitions   Alistair Popple
    • [Skiboot] [PATCH 4/6] include/pci-cfg.h: Add PCI vendor specific capability definitions   Benjamin Herrenschmidt
  • [Skiboot] [PATCH 5/6] Nvlink: Add NPU PHB functions   Alistair Popple
  • [Skiboot] [PATCH 6/6] Garrison: Add Nvlink device tree bindings   Alistair Popple
  • [Skiboot] [PATCH 0/6] Add Nvlink support   Stewart Smith
    • [Skiboot] [PATCH 0/6] Add Nvlink support   Gavin Shan
• [Skiboot] skiboot-5.1.8 tagged & released!   Stewart Smith
• [Skiboot] OpenPOWER Summit 2016 - Call for Speakers   Stewart Smith
• [Skiboot] [PATCH 1/7] mambo: Use alternate skiboot.lid with SKIBOOT   Michael Neuling
  • [Skiboot] [PATCH 2/7] mambo: Use SIMHOST to determine the simulator type   Michael Neuling
    • [Skiboot] [PATCH 2/7] mambo: Use SIMHOST to determine the simulator type   Stewart Smith
      • [Skiboot] [PATCH 2/7] mambo: Use SIMHOST to determine the simulator type   Michael Neuling
      • [Skiboot] [PATCH 2/7] mambo: Use SIMHOST to determine the simulator type   Stewart Smith
  • [Skiboot] [PATCH 3/7] mambo: Make PVR change only on p8   Michael Neuling
  • [Skiboot] [PATCH 4/7] mambo: Add ability to load initrd   Michael Neuling
  • [Skiboot] [PATCH 5/7] mambo: Advertise the sim supports 256M and 1TB segments in device tree   Michael Neuling
  • [Skiboot] [PATCH 6/7] mambo: Add SKIBOOT_SIMCONF for additional configuration   Michael Neuling
  • [Skiboot] [PATCH 7/7] mambo: Auto start the simulator using SKIBOOT_AUTORUN   Michael Neuling
• [Skiboot] [PATCH] slw: Move add_cpu_idle_state_properties() to add_opal_node()   Shilpasri G Bhat
• [Skiboot] [PATCH] PHB3: Add M64 BAR number as a device node property   Wei Yang
  • [Skiboot] [PATCH] PHB3: Add M64 BAR number as a device node property   Benjamin Herrenschmidt
    • [Skiboot] [PATCH] PHB3: Add M64 BAR number as a device node property   Wei Yang
• [Skiboot] [PATCH v2] PHB3: Add M64 BAR count as a device node property   Wei Yang
  • [Skiboot] [PATCH v2] PHB3: Add M64 BAR count as a device node property   Stewart Smith
    • [Skiboot] [PATCH v2] PHB3: Add M64 BAR count as a device node property   Gavin Shan
      • [Skiboot] [PATCH v2] PHB3: Add M64 BAR count as a device node property   Wei Yang
• [Skiboot] [PATCH] opal-prd: Display messages at startup and shutdown   Joel Stanley
  • [Skiboot] [PATCH] opal-prd: Display messages at startup and shutdown   Jeremy Kerr
    • [Skiboot] [PATCH] opal-prd: Display messages at startup and shutdown   Cédric Le Goater
      • [Skiboot] [PATCH] opal-prd: Display messages at startup and shutdown   Joel Stanley
      • [Skiboot] [PATCH] opal-prd: Display messages at startup and shutdown   Jeremy Kerr
  • [Skiboot] [PATCH] opal-prd: Display messages at startup and shutdown   Stewart Smith
• [Skiboot] [PATCH] gard: print error message when we can't open a flash device   Jeremy Kerr
  • [Skiboot] [PATCH] gard: print error message when we can't open a flash device   Stewart Smith
• [Skiboot] [PATCH] console: Completely flush output buffer before power down and reboot   Russell Currey
• [Skiboot] [PATCH] Support PowerNV Qemu for running tests   Stewart Smith
  • [Skiboot] [PATCH] Support PowerNV Qemu for running tests   Stewart Smith
• [Skiboot] [PATCH] opal-prd: add systemd scripts   Cédric Le Goater
• [Skiboot] [PATCH] Free bl_prot_range on file_exit_close()   Samuel Mendoza-Jonas
  • [Skiboot] [PATCH] Free bl_prot_range on file_exit_close()   Cyril Bur
• [Skiboot] [PATCH] opal/hmi: Signal PRD about NX unit checkstop.   Mahesh J Salgaonkar
  • [Skiboot] [PATCH] opal/hmi: Signal PRD about NX unit checkstop.   Daniel Axtens
    • [Skiboot] [PATCH] opal/hmi: Signal PRD about NX unit checkstop.   Stewart Smith
      • [Skiboot] [PATCH] opal/hmi: Signal PRD about NX unit checkstop.   Patrick Williams
      • [Skiboot] [PATCH] opal/hmi: Signal PRD about NX unit checkstop.   Daniel Axtens
  • [Skiboot] [PATCH] opal/hmi: Signal PRD about NX unit checkstop.   Stewart Smith
• [Skiboot] [PATCH 0/5] BT improvements   Cyril Bur
  • [Skiboot] [PATCH 1/5] hw/bt: Improve debug printing   Cyril Bur
    • [Skiboot] [PATCH 1/5] hw/bt: Improve debug printing   Alistair Popple
      • [Skiboot] [PATCH 1/5] hw/bt: Improve debug printing   Cyril Bur
  • [Skiboot] [PATCH 2/5] hw/bt: Convert retry_count to send_count   Cyril Bur
    • [Skiboot] [PATCH 2/5] hw/bt: Convert retry_count to send_count   Alistair Popple
  • [Skiboot] [PATCH 3/5] hw/bt: Remove state machine and use only B2H_ATN and H2B_ATN.   Cyril Bur
    • [Skiboot] [PATCH 3/5] hw/bt: Remove state machine and use only B2H_ATN and H2B_ATN.   Alistair Popple
  • [Skiboot] [PATCH 4/5] hw/bt: Clear the fifo when an unknown response is received   Cyril Bur
    • [Skiboot] [PATCH 4/5] hw/bt: Clear the fifo when an unknown response is received   Alistair Popple
      • [Skiboot] [PATCH 4/5] hw/bt: Clear the fifo when an unknown response is received   Cyril Bur
  • [Skiboot] [PATCH 5/5] hw/bt: Ask the BMC for its BT interface capabilities   Cyril Bur
    • [Skiboot] [PATCH 5/5] hw/bt: Ask the BMC for its BT interface capabilities   Alistair Popple
      • [Skiboot] [PATCH 5/5] hw/bt: Ask the BMC for its BT interface capabilities   Cyril Bur
• [Skiboot] [PATCH] core/pci.c: Move device node fixups to happen after all devices are added to the DT   Alistair Popple
• [Skiboot] [PATCH] Add Nvlink documentation including device tree bindings   Alistair Popple
• [Skiboot] skiboot-5.1.9 tagged and released!   Stewart Smith
• [Skiboot] [PATCH] nvlink: Set a bit in config space to indicate a real PCI device was bound   Russell Currey

Last message date: Fri Oct 30 15:36:30 AEDT 2015
Archived on: Fri Oct 30 15:36:57 AEDT 2015

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...