July 2018 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Jul 3 00:13:01 AEST 2018
Ending: Tue Jul 31 17:01:17 AEST 2018
Messages: 147

• [PATCH v4 0/4] gpio: aspeed: Fixes and support for sharing with co-processor   Linus Walleij
• [PATCH] i2c: aspeed: Add newline characters into message printings.   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Fix initial values of master and slave state   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Adjust spinlock scope in the irq handler   Jae Hyun Yoo
• [PATCH v4 0/4] gpio: aspeed: Fixes and support for sharing with co-processor   Benjamin Herrenschmidt
• [PATCH] clk: aspeed: Treat a gate in reset as disabled   Benjamin Herrenschmidt
• [PATCH linux-next v6 04/13] dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs   Rob Herring
• [PATCH linux-next v6 04/13] dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs   Jae Hyun Yoo
• [PATCH 1/2] dt-bindings: fsi: Add optional chip-id to CFAMs   Rob Herring
• [PATCH] clk: aspeed: Fix SDCLK name   Rob Herring
• [PATCH 11/14] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"   Rob Herring
• [PATCH 1/2] dt-bindings: fsi: Add optional chip-id to CFAMs   Benjamin Herrenschmidt
• [PATCH 11/14] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"   Benjamin Herrenschmidt
• [PATCH] clk: aspeed: Treat a gate in reset as disabled   Joel Stanley
• [PATCH 11/14] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"   Rob Herring
• [PATCH 1/2] dt-bindings: fsi: Add optional chip-id to CFAMs   Rob Herring
• [PATCH] clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical   Joel Stanley
• [PATCH 1/2] dt-bindings: fsi: Add optional chip-id to CFAMs   Benjamin Herrenschmidt
• [PATCH] [RESEND] usb/gadget: aspeed-vhub: add USB_LIBCOMPOSITE dependency   Arnd Bergmann
• [PATCH] clk: aspeed: Treat a gate in reset as disabled   Stephen Boyd
• [PATCH] clk: aspeed: Support HPLL strapping on ast2400   Stephen Boyd
• [PATCH] drivers/misc: Aspeed LPC snoop output using misc chardev   Benjamin Fair
• [PATCH] clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical   Stephen Boyd
• [PATCH] clk: aspeed: Fix SDCLK name   Stephen Boyd
• [PATCH] [RESEND] usb/gadget: aspeed-vhub: add USB_LIBCOMPOSITE dependency   Benjamin Herrenschmidt
• [PATCH 11/14] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"   Benjamin Herrenschmidt
• [PATCH] drivers/misc: Aspeed LPC snoop output using misc chardev   Greg Kroah-Hartman
• [PATCH] gpio: aspeed: fix compile testing warning   Arnd Bergmann
• [PATCH] gpio: aspeed: fix compile testing warning   Alexander Stein
• [PATCH] gpio: aspeed: fix compile testing warning   Arnd Bergmann
• [PATCH] gpio: aspeed: fix compile testing warning   Benjamin Herrenschmidt
• [PATCH] drivers/misc: Aspeed LPC snoop output using misc chardev   Benjamin Fair
• [PATCH] i2c: aspeed: Add newline characters into message printings.   Brendan Higgins
• [PATCH] i2c: aspeed: Fix initial values of master and slave state   Brendan Higgins
• [PATCH] clk: aspeed: Support HPLL strapping on ast2400   Joel Stanley
• [PATCH] clk: aspeed: Support HPLL strapping on ast2400   Stephen Boyd
• [PATCH] i2c: aspeed: Add newline characters into message printings.   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Fix initial values of master and slave state   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Add newline characters into message printings.   Joe Perches
• [PATCH 06/14] fsi: master-gpio: Add more tracepoints   Benjamin Herrenschmidt
• [PATCH 1/2] dt-bindings: fsi: Add optional chip-id to CFAMs   Benjamin Herrenschmidt
• [PATCH 0/5] fsi: Coldfire coprocessor offload   Benjamin Herrenschmidt
• [PATCH v3 1/5] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"   Benjamin Herrenschmidt
• [PATCH v3 2/5] devres: Add devm_of_iomap()   Benjamin Herrenschmidt
• [PATCH v3 3/5] fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire   Benjamin Herrenschmidt
• [PATCH v3 4/5] arm: dts: OpenPower Romulus system can use coprocessor for FSI   Benjamin Herrenschmidt
• [PATCH v3 5/5] arm: dts: OpenPower Palmetto system can use coprocessor for FSI   Benjamin Herrenschmidt
• [PATCH] usb: gadget: aspeed: Workaround memory ordering issue   Benjamin Herrenschmidt
• [PATCH v3 3/5] fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire   Joel Stanley
• [PATCH] i2c: aspeed: Add newline characters into message printings.   Brendan Higgins
• [PATCH] i2c: aspeed: Adjust spinlock scope in the irq handler   Brendan Higgins
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Brendan Higgins
• [PATCH v3 3/5] fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire   Benjamin Herrenschmidt
• [PATCH] i2c: aspeed: Add newline characters into message printings.   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Jae Hyun Yoo
• [PATCH] gpio: aspeed: fix compile testing warning   Linus Walleij
• [PATCH] gpio: aspeed: fix compile testing warning   Linus Walleij
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Brendan Higgins
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Brendan Higgins
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Adjust spinlock scope in the irq handler   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Adjust spinlock scope in the irq handler   Wolfram Sang
• [PATCH] i2c: aspeed: Adjust spinlock scope in the irq handler   Jae Hyun Yoo
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Gary Hsu
• [PATCH 1/7] arm: dts: aspeed: Add aspeed G4 USB pinmux   Andrew Jeffery
• [PATCH 2/7] arm: dts: aspeed: Add aspeed G5 USB host pinmux   Andrew Jeffery
• [PATCH 3/7] arm: dts: aspeed: Add Aspeed G4 USB Virtual Hub   Andrew Jeffery
• [PATCH 4/7] arm: dts: aspeed: Add Aspeed 54 USB Virtual Hub   Andrew Jeffery
• [PATCH 5/7] arm: configs: Add USB gadget to Aspeed G4 defconfig   Andrew Jeffery
• [PATCH 6/7] arm: configs: Add USB gadget to Aspeed G5 defconfig   Andrew Jeffery
• [PATCH 7/7] arm: dts: aspeed: Enable vhub on port A of AST2500 EVB   Andrew Jeffery
• [PATCH 3/7] arm: dts: aspeed: Add Aspeed G4 USB Virtual Hub   Benjamin Herrenschmidt
• [PATCH 3/7] arm: dts: aspeed: Add Aspeed G4 USB Virtual Hub   Andrew Jeffery
• [PATCH 1/2] dt-bindings: fsi: Add optional chip-id to CFAMs   Rob Herring
• [PATCH v3 1/5] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"   Rob Herring
• [PATCH v3 1/5] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"   Benjamin Herrenschmidt
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Jae Hyun Yoo
• [PATCH 0/3] ARM: config: ASPEED and mutli v5 updates for 4.19   Joel Stanley
• [PATCH 1/3] ARM: config: aspeed: Update defconfig   Joel Stanley
• [PATCH 2/3] ARM: config: multi_v5: Refresh configuration   Joel Stanley
• [PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers   Joel Stanley
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Brendan Higgins
• [PATCH] i2c: aspeed: Improve driver to support multi-master use cases stably   Brendan Higgins
• [PATCH] i2c: aspeed: Add newline characters into message printings.   Wolfram Sang
• [PATCH] i2c: aspeed: Fix initial values of master and slave state   Wolfram Sang
• [PATCH] i2c: aspeed: Adjust spinlock scope in the irq handler   Wolfram Sang
• [PATCH 1/4] mtd: spi-nor: aspeed: use command mode for reads   Joel Stanley
• [PATCH 2/4] mtd: spi-nor: aspeed: add support for SPI dual IO read mode   Joel Stanley
• [PATCH 3/4] mtd: spi-nor: aspeed: retrieve the ABH clock frequency   Joel Stanley
• [PATCH 4/4] mtd: spi-nor: aspeed: introduce optimized settings for fast reads   Joel Stanley
• [PATCH i2c-next] i2c: aspeed: Add an implicit type casting for *get_clk_reg_val   Jae Hyun Yoo
• [PATCH i2c-next] i2c: aspeed: Handle master/slave combined irq events properly   Jae Hyun Yoo
• [PATCH i2c-next] i2c: aspeed: Handle master/slave combined irq events properly   James Feist
• [PATCH i2c-next] i2c: aspeed: Handle master/slave combined irq events properly   Jae Hyun Yoo
• [PATCH v7 00/12] PECI device driver introduction   Jae Hyun Yoo
• [PATCH v7 01/12] dt-bindings: Add a document of PECI subsystem   Jae Hyun Yoo
• [PATCH v7 02/12] Documentation: ioctl: Add ioctl numbers for PECI subsystem   Jae Hyun Yoo
• [PATCH v7 03/12] peci: Add support for PECI bus driver core   Jae Hyun Yoo
• [PATCH v7 04/12] dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs   Jae Hyun Yoo
• [PATCH v7 05/12] ARM: dts: aspeed: peci: Add PECI node   Jae Hyun Yoo
• [PATCH v7 06/12] peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx   Jae Hyun Yoo
• [PATCH v7 07/12] dt-bindings: mfd: Add a document for PECI client MFD   Jae Hyun Yoo
• [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver   Jae Hyun Yoo
• [PATCH v7 09/12] Documentation: hwmon: Add documents for PECI hwmon client drivers   Jae Hyun Yoo
• [PATCH v7 10/12] hwmon: Add PECI cputemp driver   Jae Hyun Yoo
• [PATCH v7 11/12] hwmon: Add PECI dimmtemp driver   Jae Hyun Yoo
• [PATCH v7 12/12] Add maintainers for the PECI subsystem   Jae Hyun Yoo
• [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver   Randy Dunlap
• [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver   Jae Hyun Yoo
• [PATCH 0/5] arm: dts: aspeed DTS updates for OpenPower   Benjamin Herrenschmidt
• [PATCH 1/5] arm: dts: aspeed: Add coprocessor interrupt controller   Benjamin Herrenschmidt
• [PATCH 2/5] arm: dts: OpenPower Romulus system can use coprocessor for FSI   Benjamin Herrenschmidt
• [PATCH 3/5] arm: dts: OpenPower Palmetto system can use coprocessor for FSI   Benjamin Herrenschmidt
• [PATCH 4/5] arm: dts: Add power8 CFAM dtsi and use it on palmetto   Benjamin Herrenschmidt
• [PATCH 5/5] arm: dts: aspeed: Add power9 CFAM dtsi and use it on OpenPower P9 machines   Benjamin Herrenschmidt
• [PATCH 1/5] arm: dts: aspeed: Add coprocessor interrupt controller   Joel Stanley
• [PATCH 1/5] arm: dts: aspeed: Add coprocessor interrupt controller   Benjamin Herrenschmidt
• [PATCH 1/3] ARM: config: aspeed: Update defconfig   Andrew Jeffery
• [PATCH 2/3] ARM: config: multi_v5: Refresh configuration   Andrew Jeffery
• [PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers   Andrew Jeffery
• [PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers   Joel Stanley
• [PATCH 3/3] ARM: config: multi_v5: Enable ASPEED drivers   Andrew Jeffery
• [PATCH 0/5] fsi: Convert misc devs to proper chardevs and more   Benjamin Herrenschmidt
• [PATCH 1/5] fsi: Add new central chardev support   Benjamin Herrenschmidt
• [PATCH 2/5] fsi: sbefifo: Convert to use the new chardev   Benjamin Herrenschmidt
• [PATCH 3/5] fsi: scom: Convert to use the new chardev   Benjamin Herrenschmidt
• [PATCH 4/5] fsi: Add cfam char devices   Benjamin Herrenschmidt
• [PATCH 5/5] fsi: Prevent multiple concurrent rescans   Benjamin Herrenschmidt
• [PATCH v2] i2c: aspeed: Handle master/slave combined irq events properly   Jae Hyun Yoo
• [PATCH i2c-next v2] i2c: aspeed: Add an explicit type casting for *get_clk_reg_val   Jae Hyun Yoo
• [GIT PULL] ARM: aspeed: dts changes for 4.19   Joel Stanley
• [GIT PULL] ARM: aspeed: defconfig changes for 4.19   Joel Stanley
• [GIT PULL] ARM: aspeed: defconfig changes for 4.19   Olof Johansson
• [PATCH 5/5] arm: dts: aspeed: Add power9 CFAM dtsi and use it on OpenPower P9 machines   Olof Johansson
• [GIT PULL] ARM: aspeed: dts changes for 4.19   Olof Johansson
• [PATCH 5/5] arm: dts: aspeed: Add power9 CFAM dtsi and use it on OpenPower P9 machines   Benjamin Herrenschmidt
• [GIT PULL] ARM: aspeed: defconfig changes for 4.19   Joel Stanley
• [GIT PULL] ARM: aspeed: dts changes for 4.19   Joel Stanley
• [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver   Lee Jones
• [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver   Jae Hyun Yoo
• [PATCH v7 11/12] hwmon: Add PECI dimmtemp driver   Rob Herring
• [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver   Rob Herring
• [PATCH v7 11/12] hwmon: Add PECI dimmtemp driver   Jae Hyun Yoo
• [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver   Jae Hyun Yoo
• [PATCH v7 08/12] mfd: intel-peci-client: Add PECI client MFD driver   Lee Jones

Last message date: Tue Jul 31 17:01:17 AEST 2018
Archived on: Tue Jul 31 18:14:01 AEST 2018

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...