[PATCH 3/7] arm: dts: aspeed: Add Aspeed G4 USB Virtual Hub

[Benjamin Herrenschmidt]

On Mon, 2018-07-16 at 15:04 +0930, Andrew Jeffery wrote:
> On Fri, 29 Jun 2018, at 13:21, Benjamin Herrenschmidt wrote:
> > This adds the (disabled by default) device node for the
> > Aspeed virtual hub,a long with clocks and pinmux.
> > 
> > Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
> > ---
> >  arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
> > index 1d7ffa9fdb11..54524564037c 100644
> > --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> > +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> > @@ -131,6 +131,16 @@
> >  			 */
> >  		};
> >  
> > +		vhub: usb-vhub at 1e6a0000 {
> > +			compatible = "aspeed,ast2400-usb-vhub";
> > +			reg = <0x1e6a0000 0x300>;
> > +			interrupts = <5>;
> > +			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> > +			pinctrl-names = "default";
> > +			pinctrl-0 = <&pinctrl_usb2d_default>;
> > +			status = "disabled";
> > +		};
> > +
> 
> These are all generic properties, so it's pretty clear what's going
> on, but it seems there's no bindings document capturing the
> compatible string? Not wanting to be a pain, but shouldn't we have
> documented it?

The driver went in at a time when I hadn't realized we documented
bindings for devices using only standard properties these days. We can
send a binding to Rob later.

Cheers,
Ben.

> 
> >  		apb {
> >  			compatible = "simple-bus";
> >  			#address-cells = <1>;
> > -- 
> > 2.17.1
> >