June 2024 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Jun 1 05:31:14 AEST 2024
Ending: Sat Jun 29 12:01:33 AEST 2024
Messages: 248

• [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name   Rob Herring (Arm)
• [PATCH v2 0/2] dt-bindings: gpio: aspeed,sgpio: Miscellaneous cleanups   Bartosz Golaszewski
• [PATCH v3 1/4] arm: dts: nxp: lpc: lpc32xx: drop 'clocks' form rtc   Javier Carrasco
• [PATCH] ARM: dts: aspeed: convert ASRock SPC621D8HM3 NVMEM content to layout syntax   Zev Weiss
• [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name   Andrew Jeffery
• [PATCH] ARM: dts: aspeed: convert ASRock SPC621D8HM3 NVMEM content to layout syntax   Andrew Jeffery
• [PATCH 1/3] dt-bindings: pinctrl: aspeed: Use block syntax for function and groups   Rob Herring
• [PATCH 2/3] dt-bindings: pinctrl: aspeed,ast2500-pinctrl: Describe SGPM   Rob Herring (Arm)
• [PATCH 3/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Describe I3C, USB   Rob Herring (Arm)
• [PATCH v1] ARM: dts: aspeed: System1: Updates to BMC board   Ninad Palsule
• [PATCH 1/3] dt-bindings: pinctrl: aspeed: Use block syntax for function and groups   Andrew Jeffery
• [PATCH v1] ARM: dts: aspeed: System1: Updates to BMC board   Rob Herring (Arm)
• [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems   Eddie James
• [PATCH v2] ARM: dts: aspeed: System1: Updates to BMC board   Ninad Palsule
• [PATCH v2] ARM: dts: aspeed: System1: Updates to BMC board   Eddie James
• [PATCH v4 00/40] fsi: Add interrupt support   Eddie James
• [PATCH v4 01/40] fsi: hub: Set master index to link number plus one   Eddie James
• [PATCH v4 02/40] fsi: Move slave definitions to fsi-slave.h   Eddie James
• [PATCH v4 03/40] fsi: Fix slave addressing after break command   Eddie James
• [PATCH v4 04/40] fsi: Use a defined value for default echo delay   Eddie James
• [PATCH v4 05/40] fsi: Calculate local bus clock frequency   Eddie James
• [PATCH v4 06/40] fsi: core: Improve master read/write/error traces   Eddie James
• [PATCH v4 07/40] fsi: core: Add slave error trace   Eddie James
• [PATCH v4 08/40] fsi: core: Reset errors instead of clearing interrupts   Eddie James
• [PATCH v4 09/40] fsi: aspeed: Add AST2700 support   Eddie James
• [PATCH v4 10/40] fsi: core: Add slave spinlock   Eddie James
• [PATCH v4 11/40] fsi: core: Allow cfam device type aliases   Eddie James
• [PATCH v4 12/40] fsi: core: Add common regmap master functions   Eddie James
• [PATCH v4 13/40] fsi: core: Disable relative addressing during scan   Eddie James
• [PATCH v4 14/40] fsi: hub: Use common initialization and link enable   Eddie James
• [PATCH v4 15/40] fsi: aspeed: Use common initialization and link enable   Eddie James
• [PATCH v4 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove   Eddie James
• [PATCH v4 17/40] fsi: aspeed: Refactor trace functions   Eddie James
• [PATCH v4 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers   Eddie James
• [PATCH v4 19/40] fsi: aspeed: Only read result register for successful read   Eddie James
• [PATCH v4 20/40] fsi: aspeed: Switch to spinlock   Eddie James
• [PATCH v4 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset   Eddie James
• [PATCH v4 22/40] fsi: aspeed: Use common master error handler   Eddie James
• [PATCH v4 23/40] fsi: core: Add interrupt support   Eddie James
• [PATCH v4 24/40] fsi: aspeed: Add interrupt support   Eddie James
• [PATCH v4 25/40] fsi: hub: Add interrupt support   Eddie James
• [PATCH v4 26/40] i2c: fsi: Calculate clock divider from local bus frequency   Eddie James
• [PATCH v4 27/40] i2c: fsi: Improve formatting   Eddie James
• [PATCH v4 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer   Eddie James
• [PATCH v4 29/40] i2c: fsi: Remove list structure of ports   Eddie James
• [PATCH v4 30/40] i2c: fsi: Define a function to check status error bits   Eddie James
• [PATCH v4 31/40] i2c: fsi: Add boolean for skip stop command on abort   Eddie James
• [PATCH v4 32/40] i2c: fsi: Add interrupt support   Eddie James
• [PATCH v4 33/40] fsi: hub master: Reset hub master after errors   Eddie James
• [PATCH v4 34/40] fsi: core: Add master register read-only sysfs   Eddie James
• [PATCH v4 35/40] fsi: core: Add slave register read-only sysfs   Eddie James
• [PATCH v4 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip   Eddie James
• [PATCH v4 37/40] fsi: core: Add different types of CFAM   Eddie James
• [PATCH v4 38/40] spi: fsi: Calculate clock divider from local bus frequency   Eddie James
• [PATCH v4 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency   Eddie James
• [PATCH v4 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies   Eddie James
• [PATCH] fsi: add missing MODULE_DESCRIPTION() macros   Jeff Johnson
• [PATCH v4 00/40] fsi: Add interrupt support   Andrew Jeffery
• [PATCH v2] ARM: dts: aspeed: System1: Updates to BMC board   Andrew Jeffery
• [PATCH] i2c: aspeed: Update the stop sw state when the bus recovry occurs   Andi Shyti
• [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems   Andrew Jeffery
• [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name   kernel test robot
• [PATCH v2] i2c: aspeed: Update the stop sw state when the bus recovery occurs   Tommy Huang
• [PATCH] i2c: aspeed: Update the stop sw state when the bus recovry occurs   Tommy Huang
• [PATCH v2] i2c: aspeed: Update the stop sw state when the bus recovery occurs   kernel test robot
• [PATCH v2] i2c: aspeed: Update the stop sw state when the bus recovery occurs   kernel test robot
• [PATCH] i2c: aspeed: Update the stop sw state when the bus recovry occurs   Tommy Huang
• [PATCH] usb: gadget: aspeed_udc: fix device address configuration   Jeremy Kerr
• [PATCH] peci: aspeed: Clear clock_divider value before setting it   Billy Tsai
• [PATCH] usb: gadget: aspeed_udc: fix device address configuration   Andrew Jeffery
• [PATCH] usb: gadget: aspeed_udc: fix device address configuration   Neal Liu
• [PATCH] usb: gadget: aspeed_udc: fix device address configuration   Ryan Chen
• [PATCH] usb: gadget: aspeed_udc: fix device address configuration   Jeremy Kerr
• [PATCH] usb: gadget: aspeed_udc: fix device address configuration   Ryan Chen
• [PATCH] usb: gadget: aspeed_udc: fix device address configuration   Greg Kroah-Hartman
• [PATCH v2] usb: gadget: aspeed_udc: fix device address configuration   Jeremy Kerr
• [PATCH 1/1] pinctrl: aspeed-g6: Add NCSI pin group config   Potin Lai
• [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600)   Peter Yin
• [PATCH v1 1/7] ARM: dts: aspeed: Harma: revise hsc chip   Peter Yin
• [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device   Peter Yin
• [PATCH v1 3/7] ARM: dts: aspeed: Harma: add sgpio name   Peter Yin
• [PATCH v1 4/7] ARM: dts: aspeed: Harma: add ina238   Peter Yin
• [PATCH v1 5/7] ARM: dts: aspeed: Harma: add power monitor xdp710   Peter Yin
• [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property   Peter Yin
• [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546   Peter Yin
• [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device   kernel test robot
• [PATCH 1/3] dt-bindings: pinctrl: aspeed: Use block syntax for function and groups   Andrew Jeffery
• [PATCH 1/1] pinctrl: aspeed-g6: Add NCSI pin group config   Andrew Jeffery
• [PATCH 0/3] dt-bindings: pinctrl: aspeed: Define missing functions and groups   Linus Walleij
• [PATCH 0/3] dt-bindings: pinctrl: aspeed: Define missing functions and groups   Andrew Jeffery
• [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546   Andrew Jeffery
• [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property   kernel test robot
• [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property   Andrew Jeffery
• [PATCH v2 00/20] pinctrl: Use scope based of_node_put() cleanups   Peng Fan
• [PATCH 1/1] pinctrl: aspeed-g6: Add NCSI pin group config   Potin Lai
• [PATCH 1/1] pinctrl: aspeed-g6: Add NCSI pin group config   Andrew Jeffery
• [PATCH v2 0/2] add ast2600 NCSI pin group   Potin Lai
• [PATCH v2 1/2] pinctrl: aspeed-g6: Add NCSI pin group config   Potin Lai
• [PATCH v2 2/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group   Potin Lai
• [PATCH v2 1/2] pinctrl: aspeed-g6: Add NCSI pin group config   Paul Menzel
• [PATCH v2 2/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group   Krzysztof Kozlowski
• [PATCH v3 0/2] add ast2600 NCSI pin group   Potin Lai
• [PATCH v3 1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group   Potin Lai
• [PATCH v3 2/2] pinctrl: aspeed-g6: Add NCSI pin group config   Potin Lai
• [PATCH v3 1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group   Andrew Jeffery
• [PATCH v3 1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group   Potin Lai
• [PATCH v4 0/2] add ast2600 NCSI pin groups   Potin Lai
• [PATCH v4 1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI groups   Potin Lai
• [PATCH v4 2/2] pinctrl: aspeed-g6: Add NCSI pin group config   Potin Lai
• [PATCH 03/10] iio: adc: hx711: remove hx711_remove()   David Lechner
• [PATCH 06/10] iio: adc: max1363: use devm_regulator_get_enable_read_voltage()   David Lechner
• [PATCH 00/10] iio: use devm_regulator_get_enable_read_voltage round 2   David Lechner
• [PATCH 01/10] iio: adc: aspeed_adc: use devm_regulator_get_enable_read_voltage()   David Lechner
• [PATCH 02/10] iio: adc: hx711: use devm_regulator_get_enable_read_voltage()   David Lechner
• [PATCH 04/10] iio: adc: hx711: use dev_err_probe()   David Lechner
• [PATCH 05/10] iio: adc: ltc2309: use devm_regulator_get_enable_read_voltage()   David Lechner
• [PATCH 07/10] iio: adc: ti-adc108s102: use devm_regulator_get_enable_read_voltage()   David Lechner
• [PATCH 08/10] iio: adc: ti-ads8688: use devm_regulator_get_enable_read_voltage()   David Lechner
• [PATCH 09/10] iio: adc: ti-ads8688: drop ads8688_remove()   David Lechner
• [PATCH 10/10] iio: dac: ad3552r: use devm_regulator_get_enable_read_voltage()   David Lechner
• [PATCH] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Ma Ke
• [PATCH] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Markus Elfring
• [PATCH] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Greg Kroah-Hartman
• [PATCH 00/10] iio: use devm_regulator_get_enable_read_voltage round 2   Jonathan Cameron
• [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name   Krzysztof Kozlowski
• [PATCH 01/10] iio: adc: aspeed_adc: use devm_regulator_get_enable_read_voltage()   Andrew Jeffery
• [PATCH] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Andrew Jeffery
• [PATCH v3 1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group   Andrew Jeffery
• [PATCH v4 1/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI groups   Andrew Jeffery
• [PATCH v4 2/2] pinctrl: aspeed-g6: Add NCSI pin group config   Andrew Jeffery
• [PATCH v2] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Ma Ke
• [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name   Joel Stanley
• [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name   Krzysztof Kozlowski
• [PATCH 04/10] iio: adc: hx711: use dev_err_probe()   Andreas Klinger
• [PATCH 03/10] iio: adc: hx711: remove hx711_remove()   Andreas Klinger
• [PATCH 02/10] iio: adc: hx711: use devm_regulator_get_enable_read_voltage()   Andreas Klinger
• [PATCH 05/10] iio: adc: ltc2309: use devm_regulator_get_enable_read_voltage()   Nuno Sá
• [PATCH 06/10] iio: adc: max1363: use devm_regulator_get_enable_read_voltage()   Nuno Sá
• [PATCH 10/10] iio: dac: ad3552r: use devm_regulator_get_enable_read_voltage()   Nuno Sá
• [PATCH v2] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Greg KH
• [PATCH v2] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Markus Elfring
• [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name   Rob Herring
• [PATCH 00/10] iio: use devm_regulator_get_enable_read_voltage round 2   Jonathan Cameron
• [PATCH v2] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Andrew Jeffery
• [PATCH v3] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Ma Ke
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Ma Ke
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Markus Elfring
• [PATCH 00/17] Revise Facebook Minerva BMC DTS   Yang Chen
• [PATCH 01/17] ARM: dts: aspeed: minerva: change the address of tmp75   Yang Chen
• [PATCH 02/17] ARM: dts: aspeed: minerva: Add spi-gpio   Yang Chen
• [PATCH 03/17] ARM: dts: aspeed: minerva: change aliases for uart   Yang Chen
• [PATCH 04/17] ARM: dts: aspeed: minerva: add eeprom on i2c bus   Yang Chen
• [PATCH 05/17] ARM: dts: aspeed: minerva: change RTC reference   Yang Chen
• [PATCH 06/17] ARM: dts: aspeed: minerva: enable mdio3   Yang Chen
• [PATCH 07/17] ARM: dts: aspeed: minerva: remove unused bus and device   Yang Chen
• [PATCH 08/17] ARM: dts: aspeed: minerva: Define the LEDs node name   Yang Chen
• [PATCH 09/17] ARM: dts: aspeed: minerva: Add adc sensors for fan board   Yang Chen
• [PATCH 10/17] ARM: dts: aspeed: minerva: add linename of two pins   Yang Chen
• [PATCH 11/17] ARM: dts: aspeed: minerva: enable ehci0 for USB   Yang Chen
• [PATCH 12/17] ARM: dts: aspeed: minerva: add tmp75 sensor   Yang Chen
• [PATCH 13/17] ARM: dts: minerva: add power monitor xdp710   Yang Chen
• [PATCH 14/17] ARM: dts: aspeed: minerva: revise sgpio line name   Yang Chen
• [PATCH 15/17] ARM: dts: aspeed: minerva: Switch the i2c bus number   Yang Chen
• [PATCH 16/17] ARM: dts: aspeed: minerva: remove unused power device   Yang Chen
• [PATCH 17/17] ARM: dts: aspeed: minerva: add ltc4287 device   Yang Chen
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Greg Kroah-Hartman
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Greg Kroah-Hartman
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Markus Elfring
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Greg Kroah-Hartman
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Markus Elfring
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Greg Kroah-Hartman
• [v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Markus Elfring
• [PATCH v4] usb: gadget: aspeed_udc: validate endpoint index for ast udc   Andrew Jeffery
• [PATCH 02/17] ARM: dts: aspeed: minerva: Add spi-gpio   Andrew Jeffery
• [PATCH] fsi: add missing MODULE_DESCRIPTION() macros   Jeff Johnson
• [RFC] usb: Patch review processes?   Markus Elfring
• [PATCH v9 00/26] Add i2c-mux and eeprom devices for Meta Yosemite 4   Delphine CC Chiu
• [PATCH v9 01/26] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices   Delphine CC Chiu
• [PATCH v9 02/26] ARM: dts: aspeed: yosemite4: Enable adc15   Delphine CC Chiu
• [PATCH v9 03/26] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting   Delphine CC Chiu
• [PATCH v9 04/26] ARM: dts: aspeed: yosemite4: Enable watchdog2   Delphine CC Chiu
• [PATCH v9 05/26] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode   Delphine CC Chiu
• [PATCH v9 06/26] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change   Delphine CC Chiu
• [PATCH v9 07/26] ARM: dts: aspeed: yosemite4: Add gpio pca9506   Delphine CC Chiu
• [PATCH v9 08/26] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible   Delphine CC Chiu
• [PATCH v9 09/26] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555   Delphine CC Chiu
• [PATCH v9 10/26] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading   Delphine CC Chiu
• [PATCH v9 11/26] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use   Delphine CC Chiu
• [PATCH v9 12/26] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v9 13/26] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v9 14/26] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change   Delphine CC Chiu
• [PATCH v9 15/26] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection   Delphine CC Chiu
• [PATCH v9 16/26] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state   Delphine CC Chiu
• [PATCH v9 17/26] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config   Delphine CC Chiu
• [PATCH v9 18/26] ARM: dts: aspeed: yosemite4: add mctp config for NIC   Delphine CC Chiu
• [PATCH v9 19/26] ARM: dts: aspeed: yosemite4: support mux to cpld   Delphine CC Chiu
• [PATCH v9 20/26] ARM: dts: aspeed: yosemite4: support medusa board adc sensors   Delphine CC Chiu
• [PATCH v9 21/26] ARM: dts: aspeed: yosemite4: support NIC eeprom   Delphine CC Chiu
• [PATCH v9 22/26] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle   Delphine CC Chiu
• [PATCH v9 23/26] ARM: dts: aspeed: yosemite4: add fan led config   Delphine CC Chiu
• [PATCH v9 24/26] ARM: dts: aspeed: yosemite4: add XDP710   Delphine CC Chiu
• [PATCH v9 25/26] ARM: dts: aspeed: yosemite4: add RTQ6056 support   Delphine CC Chiu
• [PATCH v9 26/26] ARM: dts: aspeed: yosemite4: add MP5990 support   Delphine CC Chiu
• Aspeed XDMA Controller and KVM   Paraskevas Nik
• [PATCH v2 00/20] pinctrl: Use scope based of_node_put() cleanups   Linus Walleij
• [PATCH v4 0/2] add ast2600 NCSI pin groups   Linus Walleij
• [PATCH v2 00/20] pinctrl: Use scope based of_node_put() cleanups   Krzysztof Kozlowski
• (subset) [PATCH v2 20/20] pinctrl: samsung: Use scope based of_node_put() cleanups   Krzysztof Kozlowski
• (subset) [PATCH v2 20/20] pinctrl: samsung: Use scope based of_node_put() cleanups   Linus Walleij
• [PATCH v1 00/17] Revise Facebook Minerva BMC DTS   Yang Chen
• [PATCH v1 01/17] ARM: dts: aspeed: minerva: change the address of tmp75   Yang Chen
• [PATCH v1 02/17] ARM: dts: aspeed: minerva: change aliases for uart   Yang Chen
• [PATCH v1 03/17] ARM: dts: aspeed: minerva: add eeprom on i2c bus   Yang Chen
• [PATCH v1 04/17] ARM: dts: aspeed: minerva: change RTC reference   Yang Chen
• [PATCH v1 05/17] ARM: dts: aspeed: minerva: enable mdio3   Yang Chen
• [PATCH v1 06/17] ARM: dts: aspeed: minerva: remove unused bus and device   Yang Chen
• [PATCH v1 07/17] ARM: dts: aspeed: minerva: Define the LEDs node name   Yang Chen
• [PATCH v1 08/17] ARM: dts: aspeed: minerva: Add adc sensors for fan board   Yang Chen
• [PATCH v1 09/17] ARM: dts: aspeed: minerva: add linename of two pins   Yang Chen
• [PATCH v1 10/17] ARM: dts: aspeed: minerva: enable ehci0 for USB   Yang Chen
• [PATCH v1 11/17] ARM: dts: aspeed: minerva: add tmp75 sensor   Yang Chen
• [PATCH v1 12/17] ARM: dts: aspeed: minerva: add power monitor xdp710   Yang Chen
• [PATCH v1 13/17] ARM: dts: aspeed: minerva: revise sgpio line name   Yang Chen
• [PATCH v1 14/17] ARM: dts: aspeed: minerva: Switch the i2c bus number   Yang Chen
• [PATCH v1 15/17] ARM: dts: aspeed: minerva: remove unused power device   Yang Chen
• [PATCH v1 16/17] ARM: dts: aspeed: minerva: add ltc4287 device   Yang Chen
• [PATCH v1 17/17] ARM: dts: aspeed: minerva: Add spi-gpio   Yang Chen
• [PATCH 02/17] ARM: dts: aspeed: minerva: Add spi-gpio   Yang Chen
• [PATCH 00/17] Revise Facebook Minerva BMC DTS   Rob Herring (Arm)
• [PATCH v9 03/26] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting   Rob Herring
• [PATCH v1 00/17] Revise Facebook Minerva BMC DTS   Rob Herring
• [PATCH v1 00/17] Revise Facebook Minerva BMC DTS   Yang Chen
• [PATCH v1 00/17] Revise Facebook Minerva BMC DTS   Rob Herring
• [PATCH v1 00/17] Revise Facebook Minerva BMC DTS   Andrew Jeffery
• [PATCH v2 00/10] Revise Meta(Facebook) Harma BMC(AST2600)   Peter Yin
• [PATCH v2 01/10] ARM: dts: aspeed: Harma: revise hsc chip   Peter Yin
• [PATCH v2 02/10] ARM: dts: aspeed: Harma: add VR device   Peter Yin
• [PATCH v2 03/10] ARM: dts: aspeed: Harma: add sgpio name   Peter Yin
• [PATCH v2 04/10] ARM: dts: aspeed: Harma: add ina238   Peter Yin
• [PATCH v2 05/10] ARM: dts: aspeed: Harma: add power monitor xdp710   Peter Yin
• [PATCH v2 06/10] ARM: dts: aspeed: Harma: remove multi-host property   Peter Yin
• [PATCH v2 07/10] ARM: dts: aspeed: Harma: add fru device   Peter Yin
• [PATCH v2 08/10] ARM: dts: aspeed: Harma: add temperature device   Peter Yin
• [PATCH v2 09/10] ARM: dts: aspeed: Harma: enable mctp controller   Peter Yin
• [PATCH v2 10/10] ARM: dts: aspeed: Harma: fixed dtb_check warning   Peter Yin
• [PATCH v2 00/10] Revise Meta(Facebook) Harma BMC(AST2600)   Rob Herring (Arm)
• [PATCH v2] i2c: aspeed: Update the stop sw state when the bus recovery occurs   Andi Shyti
• [PATCH v2] i2c: aspeed: Update the stop sw state when the bus recovery occurs   Tommy Huang

Last message date: Sat Jun 29 12:01:33 AEST 2024
Archived on: Tue Aug 20 09:58:08 AEST 2024

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...