[PATCH v2 10/10] ARM: dts: aspeed: Harma: fixed dtb_check warning

[Peter Yin]

1. revise spi-gpio node and property name.
2. revise tpm node name
3. remove max-ngpios

Signed-off-by: Peter Yin <peteryin.openbmc at gmail.com>
---
 .../arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 0dd0566bbf27..4421822eb134 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -70,19 +70,19 @@ led-2 {
 		};
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		status = "okay";
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 
-		tpmdev at 0 {
+		tpm at 0 {
 			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
@@ -640,7 +640,6 @@ &gpio1 {
 
 &sgpiom0 {
 	status = "okay";
-	max-ngpios = <128>;
 	ngpios = <128>;
 	bus-frequency = <2000000>;
 	gpio-line-names =
-- 
2.25.1