Query regarding using the Redfish in OpenBMC

Joseph Reynolds jrey at linux.ibm.com
Thu Jul 23 23:55:51 AEST 2020


On 7/23/20 5:48 AM, khader basha shaik wrote:
> Hi Team,
>
> I am newbiee to  Openbmc.  I want to view  the redfish/v1 
> (https://10.xxx.xxx.xxx:8000/redfish/v1) contents in the browser 
> .Could you please guide me on what changes i need to so that i view 
> the /redfish/v1/ content in the browser .
>
> here are the steps i have followed:
>
>  1. Clone OpenBMC project : git clone
>     https://github.com/openbmc/openbmc.git in the server machine .
>  2. Compile using the following command:
>     TEMPLATECONF=meta-phosphor/conf  . openbmc-env
>  3. modify the following files:
>
>   *  #build vi conf/local.conf  (modify the  line "-MACHINE??=qemuarm"
>     " to "-MACHINE??=raspberrypi3-64" "
>   * #build vi conf/bblayer.conf (add the following line
>     "/home/khader<username>/openbmc/meta-raspberrypi \"  to the line 
>     above /home/khader<username>/openbmc/metaphosphor \"
>
>        4. #build  bitbake obmc-phosphor-image
>
> The above steps I have used to build an Openbmc project.
>
>
> Can you help me what further steps should i need to do so that i can 
> view the /redfish/v1/  content in the webbrowser.

What BMC system will you use to upload, boot, and run the BMC firmware 
image?  A QEMU virtual system?
Have you seen the developer docs here? 
https://github.com/openbmc/docs/tree/master/development

Good luck,
- Joseph

>
> Note:- I am compiling the openbmc code in the server machine.
>
> Any help /guidelines on this will really help me alot.
> Appreciate all your help.
>
> Thanks & Regards,
> khader B Shaik



More information about the openbmc mailing list