Adding IPMI support to an existing implementation

[Emily Shaffer]

Wim,

phosphor-ipmi-host contains the inband implementation; kcsbridged provides
the KCS interface bridge. Start by making sure those packages are included
in your build; inventory and eventlog implementations are included within
phosphor-ipmi-host.

Emily

On Fri, Feb 15, 2019 at 11:19 PM Wim Vervoorn <wvervoorn at eltan.com> wrote:

> At this point I'm not looking for additional OEM commands.
>
> My main goal is just to add all support request to enable inband ipmi with
> KCS interface.  The most important thing is that the system is capable to
> provide the inventory and eventlog information to the BMC during boot.
>
> The information I am looking for are items like. Which services need to be
> included and what do I need to configure to make it work.
>
> Best regards,
>
> Wim Vervoorn
>
> Op 15 feb. 2019 9:31 p.m. schreef Vijay Khemka <vijaykhemka at fb.com>:
> Hi Wim,
> What are trying here, adding extra ipmi support for your oem commands?
> IPMI support is already there in phosphor-image. Please see if "ipmid"
> daemon is running. You can check package phosphor-ipmi-host which provides
> support for ipmi daemon.
>
> Regards
> -Vijay
>
> On 2/15/19, 3:23 AM, "openbmc on behalf of Wim Vervoorn"
> <openbmc-bounces+vijaykhemka=fb.com at lists.ozlabs.org on behalf of
> wvervoorn at eltan.com> wrote:
>
>     Hello,
>
>     We have an existing AST2400 based implementation for OpenBMC 2.6.0 and
> are trying to add IPMI support to it.
>
>     At this moment we don't have a good set of documentation on the ipmi
> implementation included in OpenBMC.
>
>     Can anyone point me to this documentation? Or is the only way to do
> this to go over the various packages?
>
>     Best regards,
>
>     Wim Vervoorn
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190219/3a9207d1/attachment.htm>