OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

[krtaylor]

On 8/16/19 11:45 PM, James Mihm wrote:
> Check out the Intel development repo at https://github.com/intel-bmc. 
> You should be able to find what you need there.
> This is the Intel repository that we're working on getting upstreamed 
> which takes a little longer.

Prioritizing upstream collaboratively developed code will fix the 
problem, and result in higher quality to boot. The slight increase in 
design/review time (in a healthy community) pays for itself in not 
having to maintain two versions of the source.

Kurt Taylor (krtaylor)

> James.
> 
> On Fri, Aug 16, 2019 at 1:24 AM Jiang, Hongjiang (NSB - CN/Hangzhou) 
> <hongjiang.jiang at nokia-sbell.com 
> <mailto:hongjiang.jiang at nokia-sbell.com>> wrote:
> 
>     Hi,
> 
>     Thanks for your info. I will check this package and see if I can do
>     some hacking😊
> 
> 
>     Best Regards,
>     Jiang Hongjiang
> 
>     Nokia
> 
> 
>     Jiang Hongjiang
> 
> 
> 
>     +86 13666669403
> 
> 
> 
> 
>     -----Original Message-----
>     From: David Müller (ELSOFT AG) <d.mueller at elsoft.ch
>     <mailto:d.mueller at elsoft.ch>>
>     Sent: Friday, August 16, 2019 3:05 PM
>     To: Jiang, Hongjiang (NSB - CN/Hangzhou)
>     <hongjiang.jiang at nokia-sbell.com
>     <mailto:hongjiang.jiang at nokia-sbell.com>>
>     Cc: openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org>
>     Subject: Re: OpenBMC version 2.7 run in target S2600WF shows BMC not
>     ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)
> 
>     Hello
> 
>     Jiang, Hongjiang (NSB - CN/Hangzhou) wrote:
> 
>      > Currently I compiled OpenBMC tag 2.7-0 with machine target
>     S2600WF( as
>      > I have only wolfpass server in hand), and flash it to a real
>     S2600WF server.
> 
>     As far as I can see support for the Intel s2600wf board is currently
>     broken as it uses the (no longer working) x86-power-control package.
> 
>     Please see https://github.com/openbmc/x86-power-control/issues/1 for
>     more details.
> 
>     Dave
>