OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

[Jiang, Hongjiang (NSB - CN/Hangzhou)]

Hi,
OK, thanks for your info, I will take that as a reference.

Best Regards,
Jiang Hongjiang
________________________________
Nokia




Jiang Hongjiang

• +86 13666669403

________________________________


From: James Mihm <james.mihm at gmail.com>
Sent: Saturday, August 17, 2019 12:45 PM
To: Jiang, Hongjiang (NSB - CN/Hangzhou) <hongjiang.jiang at nokia-sbell.com>
Cc: David Müller (ELSOFT AG) <d.mueller at elsoft.ch>; openbmc at lists.ozlabs.org
Subject: Re: OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

Check out the Intel development repo at  https://github.com/intel-bmc. You should be able to find what you need there.
This is the Intel repository that we're working on getting upstreamed which takes a little longer.

James.

On Fri, Aug 16, 2019 at 1:24 AM Jiang, Hongjiang (NSB - CN/Hangzhou) <hongjiang.jiang at nokia-sbell.com<mailto:hongjiang.jiang at nokia-sbell.com>> wrote:
Hi,

Thanks for your info. I will check this package and see if I can do some hacking😊


Best Regards,
Jiang Hongjiang

Nokia


Jiang Hongjiang



+86 13666669403




-----Original Message-----
From: David Müller (ELSOFT AG) <d.mueller at elsoft.ch<mailto:d.mueller at elsoft.ch>>
Sent: Friday, August 16, 2019 3:05 PM
To: Jiang, Hongjiang (NSB - CN/Hangzhou) <hongjiang.jiang at nokia-sbell.com<mailto:hongjiang.jiang at nokia-sbell.com>>
Cc: openbmc at lists.ozlabs.org<mailto:openbmc at lists.ozlabs.org>
Subject: Re: OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

Hello

Jiang, Hongjiang (NSB - CN/Hangzhou) wrote:

> Currently I compiled OpenBMC tag 2.7-0 with machine target S2600WF( as
> I have only wolfpass server in hand), and flash it to a real S2600WF server.

As far as I can see support for the Intel s2600wf board is currently broken as it uses the (no longer working) x86-power-control package.

Please see https://github.com/openbmc/x86-power-control/issues/1 for more details.

Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190818/007489b6/attachment.htm>