[OT] write flash on MPC5200 board via jtag

[Grant Likely]

On Tue, Jul 22, 2008 at 08:56:43PM +0200, =?ISO-8859-1?Q?Albrecht_Dre=DF_ wrote:
> Hi,
>
> sorry for a somewhat off-topic question...
>
> I want to design a mpc5200b board which is roughly derived from  
> Freescale's 5200B Lite demo.  Obviously, I have the problem to initially 
> write u-boot into the boot nor flash.  I believe this would be possible 
> using the jtag/bsm interface (is that true?).
>
> Can you recommend any good hardware and software solution for that, if  
> possible running on linux (OSS?)?  I don't need a "real" debugger (maybe 
> an interface to gdb), just something to write the flash, so u-boot comes 
> up.

Get yourself an Abatron BDI-3000.

g.



> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded