[OT] write flash on MPC5200 board via jtag

Albrecht Dreß albrecht.dress at arcor.de
Wed Jul 23 04:56:43 EST 2008


sorry for a somewhat off-topic question...

I want to design a mpc5200b board which is roughly derived from  
Freescale's 5200B Lite demo.  Obviously, I have the problem to  
initially write u-boot into the boot nor flash.  I believe this would  
be possible using the jtag/bsm interface (is that true?).

Can you recommend any good hardware and software solution for that, if  
possible running on linux (OSS?)?  I don't need a "real" debugger  
(maybe an interface to gdb), just something to write the flash, so  
u-boot comes up.

Thanks for any help,
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20080722/8a637400/attachment.pgp>

More information about the Linuxppc-embedded mailing list