some problems on the SystemACE driver.

[Ameet Patil]

Ming,
  Had a look, both patches define the XILINX_OCP functions which is
unavoidable really. I have made some changes only so that it works in
your scenario. First apply the TEMAC patch and then this one:
https://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2-after-TEMAC.patch

Also, I have also made some new changes to the SysAce driver patch. New
version is here:
https://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2.patch

No, you donot need to apply all the patches found in my patches folder.

Let me know what happens? I think it should work....

-Ameet

Ming Liu wrote:
> Dear Ameet,
> The attached is the log file to record the error. Please unzip and 
> search for "XAssert" to go to the end to see the problem. Also, the 
> .config file is attached. Please rename the file from config into 
> .config. The linux version is 2.6.17.1. When you compile the kernel, 
> please remember to export C_INCLUDE_PATH=....../driver/xilinx_edk. 
> Thanks for your work.
> 
> Regards
> Ming
> 
> 
>> From: Ameet Patil <ammubhai at gmail.com>
>> To: Ming Liu <eemingliu at hotmail.com>
>> CC: linuxppc-embedded at ozlabs.org
>> Subject: Re: some problems on the SystemACE driver.
>> Date: Fri, 14 Jul 2006 12:12:36 +0100
>>
>> Hi Ming,
>>    Can you send me the entire text output (in a file) of the compilation
>> process with errors?
>>
>> -Ameet
>>
>> Ming Liu wrote:
>> > Dear Ameet,
>> >
>> >> 1. Which TEMAC patch are you using?
>> >> 
> (http://source.mvista.com/~ank/paulus-powerpc/20060309/ppc32_xilinx_edk_temac.patch) 
> 
> 
>> >>
>> >
>> > There are five patches in the directory 20060309 whose address is 
> listed
>> > above by you. I applied all of them in my system, because without any
>> > there will be problems.
>> >> 2. After applying the patch, is the driver getting compiled directly
>> >> without having to select it via "make menuconfig"?
>> > No. there is an option named "xilinx 10/100/1000 Mbit TEMAC support" in
>> > the menuconfig. I must select it and then compile the kernel.
>> >> 3. I don't see a Makefile in the drivers/net/xilinx_temac/ folder?
>> > I have checked. In my kernel, there is the Makefile. I don't know why
>> > this happened to you.
>> >
>> > Let me describe the detailed process I did. First, download the kernel
>> > 2.6.17.1 (or 2.6.16-rc5). Then apply the five patches for Temac.(If I
>> > use 2.6.17.1, I need to upgrade some files manually. For 2.6.16, there
>> > is no problem.) And then apply the patch for SystemACE. Also copy and
>> > replace the xparameters_ml403.h by my own file generated by EDK. Then
>> > make menuconfig, selecting both Temac and SystemACE and other basic
>> > options. Then make dep and make zImage. During this process, I need to
>> > modify some little problems which are about the inclusion of some 
> header
>> > files, or specify some lib inclusion directories instead. Then that
>> > problem appears. There are some main points: 1. configured for ml403
>> > board. 2.both Temac and SystemACE are selected. 3. 5 patches for Temac
>> > and 1 patch for SystemACE. 4. linux version is 2.6.17 or 2.6.16. I
>> > really have no idea why this still happens after your modification. So 
> I
>> > have to ask you again.
>> >> Ofcourse, I can work my way to compile the driver. But is there any 
> doc.
>> >> present explaining this?
>> > Sorry that there is no doc to explain this. I just did following the
>> > procedure described above. I am totally lost. The strange thing is, 
> when
>> > I select only one of these two drivers, no problem, but if both, 
> problem.
>> > By the way, I noticed that in the address where I get your patch, there
>> > is also a patch called linuxppc-2.6.17.1-sysace-1.0.patch which is much
>> > larger than the 1.1 one. I needn't apply the 1.0 one, right?
>> > Thanks for your hard work. Hopefully we can solve the problem.
>> > Regards
>> > Ming
>> >
>> > _________________________________________________________________
>> > 免费下载 MSN Explorer:   http://explorer.msn.com/lccn
>> >
> 
> _________________________________________________________________
> 免费下载 MSN Explorer:   http://explorer.msn.com/lccn  #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.17.1
> # Fri Jul 14 15:00:57 2006
> #
> CONFIG_MMU=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_PPC=y
> CONFIG_PPC32=y
> CONFIG_GENERIC_NVRAM=y
> CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> 
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> # CONFIG_POSIX_MQUEUE is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> # CONFIG_IKCONFIG is not set
> # CONFIG_RELAY is not set
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_SLAB=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> # CONFIG_SLOB is not set
> CONFIG_OBSOLETE_INTERMODULE=y
> 
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
> 
> #
> # Block layer
> #
> # CONFIG_LBD is not set
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_LSF is not set
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> CONFIG_DEFAULT_AS=y
> # CONFIG_DEFAULT_DEADLINE is not set
> # CONFIG_DEFAULT_CFQ is not set
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="anticipatory"
> 
> #
> # Processor
> #
> # CONFIG_6xx is not set
> CONFIG_40x=y
> # CONFIG_44x is not set
> # CONFIG_8xx is not set
> # CONFIG_E200 is not set
> # CONFIG_E500 is not set
> CONFIG_MATH_EMULATION=y
> # CONFIG_KEXEC is not set
> # CONFIG_CPU_FREQ is not set
> CONFIG_4xx=y
> # CONFIG_WANT_EARLY_SERIAL is not set
> 
> #
> # IBM 4xx options
> #
> # CONFIG_BUBINGA is not set
> # CONFIG_CPCI405 is not set
> # CONFIG_EP405 is not set
> # CONFIG_REDWOOD_5 is not set
> # CONFIG_REDWOOD_6 is not set
> # CONFIG_SYCAMORE is not set
> # CONFIG_WALNUT is not set
> # CONFIG_XILINX_ML300 is not set
> CONFIG_XILINX_ML403=y
> CONFIG_IBM405_ERR77=y
> CONFIG_IBM405_ERR51=y
> CONFIG_XILINX_VIRTEX_4_FX=y
> CONFIG_XILINX_VIRTEX=y
> CONFIG_EMBEDDEDBOOT=y
> # CONFIG_PPC4xx_DMA is not set
> CONFIG_PPC_GEN550=y
> CONFIG_UART0_TTYS0=y
> # CONFIG_UART0_TTYS1 is not set
> CONFIG_NOT_COHERENT_CACHE=y
> 
> #
> # Platform options
> #
> # CONFIG_PC_KEYBOARD is not set
> # CONFIG_HIGHMEM is not set
> # CONFIG_HZ_100 is not set
> CONFIG_HZ_250=y
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=250
> CONFIG_PREEMPT_NONE=y
> # CONFIG_PREEMPT_VOLUNTARY is not set
> # CONFIG_PREEMPT is not set
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> CONFIG_CMDLINE_BOOL=y
> CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/xsa3 rw"
> # CONFIG_PM is not set
> # CONFIG_SOFTWARE_SUSPEND is not set
> CONFIG_SECCOMP=y
> CONFIG_ISA_DMA_API=y
> 
> #
> # Bus options
> #
> # CONFIG_PPC_I8259 is not set
> # CONFIG_PCI is not set
> # CONFIG_PCI_DOMAINS is not set
> 
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
> 
> #
> # Advanced setup
> #
> # CONFIG_ADVANCED_OPTIONS is not set
> 
> #
> # Default settings for advanced configuration options are used
> #
> CONFIG_HIGHMEM_START=0xfe000000
> CONFIG_LOWMEM_SIZE=0x30000000
> CONFIG_KERNEL_START=0xc0000000
> CONFIG_TASK_SIZE=0x80000000
> CONFIG_CONSISTENT_START=0xff100000
> CONFIG_CONSISTENT_SIZE=0x00200000
> CONFIG_BOOT_LOAD=0x00400000
> 
> #
> # Networking
> #
> CONFIG_NET=y
> 
> #
> # Networking options
> #
> # CONFIG_NETDEBUG is not set
> # CONFIG_PACKET is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> # CONFIG_IP_PNP_BOOTP is not set
> # CONFIG_IP_PNP_RARP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> # CONFIG_INET_TUNNEL is not set
> # CONFIG_INET_DIAG is not set
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_BIC=y
> # CONFIG_IPV6 is not set
> # CONFIG_INET6_XFRM_TUNNEL is not set
> # CONFIG_INET6_TUNNEL is not set
> # CONFIG_NETFILTER is not set
> 
> #
> # DCCP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_DCCP is not set
> 
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> 
> #
> # TIPC Configuration (EXPERIMENTAL)
> #
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> 
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> 
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_IEEE80211 is not set
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> # CONFIG_FW_LOADER is not set
> # CONFIG_DEBUG_DRIVER is not set
> 
> #
> # Connector - unified userspace <-> kernelspace linker
> #
> # CONFIG_CONNECTOR is not set
> 
> #
> # Memory Technology Devices (MTD)
> #
> CONFIG_MTD=y
> # CONFIG_MTD_DEBUG is not set
> # CONFIG_MTD_CONCAT is not set
> CONFIG_MTD_PARTITIONS=y
> CONFIG_MTD_REDBOOT_PARTS=y
> CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
> # CONFIG_MTD_CMDLINE_PARTS is not set
> 
> #
> # User Modules And Translation Layers
> #
> CONFIG_MTD_CHAR=y
> CONFIG_MTD_BLOCK=y
> # CONFIG_FTL is not set
> # CONFIG_NFTL is not set
> # CONFIG_INFTL is not set
> # CONFIG_RFD_FTL is not set
> 
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=y
> # CONFIG_MTD_JEDECPROBE is not set
> CONFIG_MTD_GEN_PROBE=y
> # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> # CONFIG_MTD_CFI_INTELEXT is not set
> CONFIG_MTD_CFI_AMDSTD=y
> # CONFIG_MTD_CFI_STAA is not set
> CONFIG_MTD_CFI_UTIL=y
> # CONFIG_MTD_RAM is not set
> # CONFIG_MTD_ROM is not set
> # CONFIG_MTD_ABSENT is not set
> # CONFIG_MTD_OBSOLETE_CHIPS is not set
> 
> #
> # Mapping drivers for chip access
> #
> # CONFIG_MTD_COMPLEX_MAPPINGS is not set
> # CONFIG_MTD_PHYSMAP is not set
> # CONFIG_MTD_PLATRAM is not set
> 
> #
> # Self-contained MTD device drivers
> #
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PHRAM is not set
> # CONFIG_MTD_MTDRAM is not set
> # CONFIG_MTD_BLOCK2MTD is not set
> 
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> # CONFIG_MTD_DOC2001PLUS is not set
> 
> #
> # NAND Flash Device Drivers
> #
> # CONFIG_MTD_NAND is not set
> 
> #
> # OneNAND Flash Device Drivers
> #
> # CONFIG_MTD_ONENAND is not set
> 
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
> 
> #
> # Plug and Play support
> #
> 
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> CONFIG_XILINX_SYSACE=y
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_BLK_DEV_INITRD is not set
> # CONFIG_CDROM_PKTCDVD is not set
> # CONFIG_ATA_OVER_ETH is not set
> 
> #
> # ATA/ATAPI/MFM/RLL support
> #
> # CONFIG_IDE is not set
> 
> #
> # SCSI device support
> #
> # CONFIG_RAID_ATTRS is not set
> # CONFIG_SCSI is not set
> 
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> 
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> 
> #
> # IEEE 1394 (FireWire) support
> #
> 
> #
> # I2O device support
> #
> 
> #
> # Macintosh device drivers
> #
> # CONFIG_WINDFARM is not set
> 
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> 
> #
> # PHY device support
> #
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> # CONFIG_NET_ETHERNET is not set
> # CONFIG_IBM_EMAC is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> CONFIG_XILINX_TEMAC=y
> 
> #
> # Ethernet (10000 Mbit)
> #
> 
> #
> # Token Ring devices
> #
> 
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> 
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
> 
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input Device Drivers
> #
> # CONFIG_INPUT_KEYBOARD is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
> 
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
> 
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> 
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
> 
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_AGP is not set
> # CONFIG_RAW_DRIVER is not set
> 
> #
> # TPM devices
> #
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> 
> #
> # I2C support
> #
> # CONFIG_I2C is not set
> 
> #
> # SPI support
> #
> # CONFIG_SPI is not set
> # CONFIG_SPI_MASTER is not set
> 
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
> 
> #
> # Hardware Monitoring support
> #
> CONFIG_HWMON=y
> # CONFIG_HWMON_VID is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> 
> #
> # Misc devices
> #
> 
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> CONFIG_VIDEO_V4L2=y
> 
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
> 
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> 
> #
> # Console display driver support
> #
> CONFIG_DUMMY_CONSOLE=y
> 
> #
> # Sound
> #
> # CONFIG_SOUND is not set
> 
> #
> # USB support
> #
> # CONFIG_USB_ARCH_HAS_HCD is not set
> # CONFIG_USB_ARCH_HAS_OHCI is not set
> # CONFIG_USB_ARCH_HAS_EHCI is not set
> 
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
> 
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
> 
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
> 
> #
> # LED devices
> #
> # CONFIG_NEW_LEDS is not set
> 
> #
> # LED drivers
> #
> 
> #
> # LED Triggers
> #
> 
> #
> # InfiniBand support
> #
> 
> #
> # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
> #
> 
> #
> # Real Time Clock
> #
> # CONFIG_RTC_CLASS is not set
> CONFIG_XILINX_EDK=y
> 
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_FS_XIP=y
> # CONFIG_EXT3_FS is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> # CONFIG_QUOTA is not set
> CONFIG_DNOTIFY=y
> CONFIG_AUTOFS_FS=y
> CONFIG_AUTOFS4_FS=y
> # CONFIG_FUSE_FS is not set
> 
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> # CONFIG_UDF_FS is not set
> 
> #
> # DOS/FAT/NT Filesystems
> #
> # CONFIG_MSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_NTFS_FS is not set
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> # CONFIG_CONFIGFS_FS is not set
> 
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS_FS is not set
> # CONFIG_JFFS2_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> 
> #
> # Network File Systems
> #
> # CONFIG_NFS_FS is not set
> # CONFIG_NFSD is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> # CONFIG_9P_FS is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> 
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> # CONFIG_NLS_CODEPAGE_437 is not set
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ASCII is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
> 
> #
> # IBM 40x options
> #
> 
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC16 is not set
> CONFIG_CRC32=y
> # CONFIG_LIBCRC32C is not set
> # CONFIG_PROFILING is not set
> 
> #
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> # CONFIG_MAGIC_SYSRQ is not set
> CONFIG_DEBUG_KERNEL=y
> CONFIG_LOG_BUF_SHIFT=14
> CONFIG_DETECT_SOFTLOCKUP=y
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_KOBJECT is not set
> CONFIG_DEBUG_INFO=y
> # CONFIG_DEBUG_FS is not set
> # CONFIG_DEBUG_VM is not set
> # CONFIG_UNWIND_INFO is not set
> CONFIG_FORCED_INLINING=y
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_KGDB is not set
> # CONFIG_XMON is not set
> CONFIG_BDI_SWITCH=y
> # CONFIG_SERIAL_TEXT_DEBUG is not set
> 
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
> 
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
> 
> #
> # Hardware crypto devices
> #
>