some problems on the SystemACE driver.

Sat Jul 15 02:38:28 EST 2006

Dear Ameet,
I am not so clear with your email. First, I have a question about the patch 
linuxppc-2.6.17.1-sysace-1.2-after-TEMAC.patch. I noticed that in this 
patch, there are some modifications to the file xparameters_ml300.h. In my 
senario, I configure the platform as ml403 and use xparameters_ml403.h 
(copy from EDK BSP and rename the file xparameters_ml300.h as 
xparameters_ml403.h). Do you mean to modify the ml403 file, right? 

Second, after I patch linuxppc-2.6.17.1-sysace-1.2-after-TEMAC.patch, I 
needn't patch linuxppc-2.6.17.1-sysace-1.2.patch any more, right? I 
compared the two patch files and found that the only difference between 
them is in linuxppc-2.6.17.1-sysace-1.2.patch, there are some modifications 
to do with the file "adapter.c.old" while in 
linuxppc-2.6.17.1-sysace-1.2-after-TEMAC.patch there isn't. I don't think 
the file "adapter.c.old" has something to do with the kernel compilation. 

I tried the new patches in such a procedure: download the kernel, apply the 
five Temac patches, apply the patch 
linuxppc-2.6.17.1-sysace-1.2-after-TEMAC.patch, copy and replace 
xparameters_ml403.h and use the one generated by EDK (I don't know if this 
is right. But there is really no modification in your patch for the ml403 
xparameters file.). Then make menuconfig, make dep and make zImage. Still 
the same problem as former. 

Is there any problem in the sequence according to which I applied the 
patches? Or other problems? But why the problem still happened? If I made a 
wrong operation, please forgive me because I am a novice. That's why I 
would like to describe the procedure as detailed as possible. Also, please 
check it again to solve the problem. Thanks for your hard work.

Regards
Ming 

>From: Ameet Patil <ammubhai at gmail.com>
>To: Ming Liu <eemingliu at hotmail.com>
>CC: linuxppc-embedded at ozlabs.org
>Subject: Re: some problems on the SystemACE driver.
>Date: Fri, 14 Jul 2006 16:10:54 +0100
>
>Ming,
>   Had a look, both patches define the XILINX_OCP functions which is
>unavoidable really. I have made some changes only so that it works in
>your scenario. First apply the TEMAC patch and then this one:
>https://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2-after-TEMAC.patch

>
>Also, I have also made some new changes to the SysAce driver patch. New
>version is here:
>https://www.cs.york.ac.uk/rtslab/demos/amos/xupv2pro/patches/linuxppc-2.6.17.1-sysace-1.2.patch

>
>No, you donot need to apply all the patches found in my patches folder.
>
>Let me know what happens? I think it should work....
>
>-Ameet
>
>Ming Liu wrote:
> > Dear Ameet,
> > The attached is the log file to record the error. Please unzip and
> > search for "XAssert" to go to the end to see the problem. Also, the
> > .config file is attached. Please rename the file from config into
> > .config. The linux version is 2.6.17.1. When you compile the kernel,
> > please remember to export C_INCLUDE_PATH=....../driver/xilinx_edk.
> > Thanks for your work.
> >
> > Regards
> > Ming
> >
> >
> >> From: Ameet Patil <ammubhai at gmail.com>
> >> To: Ming Liu <eemingliu at hotmail.com>
> >> CC: linuxppc-embedded at ozlabs.org
> >> Subject: Re: some problems on the SystemACE driver.
> >> Date: Fri, 14 Jul 2006 12:12:36 +0100
> >>
> >> Hi Ming,
> >>    Can you send me the entire text output (in a file) of the 
compilation
> >> process with errors?
> >>
> >> -Ameet
> >>
> >> Ming Liu wrote:
> >> > Dear Ameet,
> >> >
> >> >> 1. Which TEMAC patch are you using?
> >> >>
> > 
(http://source.mvista.com/~ank/paulus-powerpc/20060309/ppc32_xilinx_edk_temac.patch)

> >
> >
> >> >>
> >> >
> >> > There are five patches in the directory 20060309 whose address is
> > listed
> >> > above by you. I applied all of them in my system, because without 
any
> >> > there will be problems.
> >> >> 2. After applying the patch, is the driver getting compiled 
directly
> >> >> without having to select it via "make menuconfig"?
> >> > No. there is an option named "xilinx 10/100/1000 Mbit TEMAC support" 
in
> >> > the menuconfig. I must select it and then compile the kernel.
> >> >> 3. I don't see a Makefile in the drivers/net/xilinx_temac/ folder?
> >> > I have checked. In my kernel, there is the Makefile. I don't know 
why
> >> > this happened to you.
> >> >
> >> > Let me describe the detailed process I did. First, download the 
kernel
> >> > 2.6.17.1 (or 2.6.16-rc5). Then apply the five patches for Temac.(If 
I
> >> > use 2.6.17.1, I need to upgrade some files manually. For 2.6.16, 
there
> >> > is no problem.) And then apply the patch for SystemACE. Also copy 
and
> >> > replace the xparameters_ml403.h by my own file generated by EDK. 
Then
> >> > make menuconfig, selecting both Temac and SystemACE and other basic
> >> > options. Then make dep and make zImage. During this process, I need 
to
> >> > modify some little problems which are about the inclusion of some
> > header
> >> > files, or specify some lib inclusion directories instead. Then that
> >> > problem appears. There are some main points: 1. configured for ml403
> >> > board. 2.both Temac and SystemACE are selected. 3. 5 patches for 
Temac
> >> > and 1 patch for SystemACE. 4. linux version is 2.6.17 or 2.6.16. I
> >> > really have no idea why this still happens after your modification. 
So
> > I
> >> > have to ask you again.
> >> >> Ofcourse, I can work my way to compile the driver. But is there any
> > doc.
> >> >> present explaining this?
> >> > Sorry that there is no doc to explain this. I just did following the
> >> > procedure described above. I am totally lost. The strange thing is,
> > when
> >> > I select only one of these two drivers, no problem, but if both,
> > problem.
> >> > By the way, I noticed that in the address where I get your patch, 
there
> >> > is also a patch called linuxppc-2.6.17.1-sysace-1.0.patch which is 
much
> >> > larger than the 1.1 one. I needn't apply the 1.0 one, right?
> >> > Thanks for your hard work. Hopefully we can solve the problem.
> >> > Regards
> >> > Ming
> >> >
> >> > _________________________________________________________________
> >> > 免费下载 MSN Explorer:   http://explorer.msn.com/lccn
> >> >
> >
> > _________________________________________________________________
> > 免费下载 MSN Explorer:   http://explorer.msn.com/lccn  #
> > # Automatically generated make config: don't edit
> > # Linux kernel version: 2.6.17.1
> > # Fri Jul 14 15:00:57 2006
> > #
> > CONFIG_MMU=y
> > CONFIG_GENERIC_HARDIRQS=y
> > CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> > CONFIG_GENERIC_HWEIGHT=y
> > CONFIG_GENERIC_CALIBRATE_DELAY=y
> > CONFIG_PPC=y
> > CONFIG_PPC32=y
> > CONFIG_GENERIC_NVRAM=y
> > CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> >
> > #
> > # Code maturity level options
> > #
> > CONFIG_EXPERIMENTAL=y
> > CONFIG_BROKEN_ON_SMP=y
> > CONFIG_INIT_ENV_ARG_LIMIT=32
> >
> > #
> > # General setup
> > #
> > CONFIG_LOCALVERSION=""
> > CONFIG_LOCALVERSION_AUTO=y
> > CONFIG_SWAP=y
> > CONFIG_SYSVIPC=y
> > # CONFIG_POSIX_MQUEUE is not set
> > # CONFIG_BSD_PROCESS_ACCT is not set
> > CONFIG_SYSCTL=y
> > # CONFIG_AUDIT is not set
> > # CONFIG_IKCONFIG is not set
> > # CONFIG_RELAY is not set
> > CONFIG_INITRAMFS_SOURCE=""
> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> > # CONFIG_EMBEDDED is not set
> > CONFIG_KALLSYMS=y
> > # CONFIG_KALLSYMS_ALL is not set
> > # CONFIG_KALLSYMS_EXTRA_PASS is not set
> > CONFIG_HOTPLUG=y
> > CONFIG_PRINTK=y
> > CONFIG_BUG=y
> > CONFIG_ELF_CORE=y
> > CONFIG_BASE_FULL=y
> > CONFIG_FUTEX=y
> > CONFIG_EPOLL=y
> > CONFIG_SHMEM=y
> > CONFIG_SLAB=y
> > # CONFIG_TINY_SHMEM is not set
> > CONFIG_BASE_SMALL=0
> > # CONFIG_SLOB is not set
> > CONFIG_OBSOLETE_INTERMODULE=y
> >
> > #
> > # Loadable module support
> > #
> > # CONFIG_MODULES is not set
> >
> > #
> > # Block layer
> > #
> > # CONFIG_LBD is not set
> > # CONFIG_BLK_DEV_IO_TRACE is not set
> > # CONFIG_LSF is not set
> >
> > #
> > # IO Schedulers
> > #
> > CONFIG_IOSCHED_NOOP=y
> > CONFIG_IOSCHED_AS=y
> > CONFIG_IOSCHED_DEADLINE=y
> > CONFIG_IOSCHED_CFQ=y
> > CONFIG_DEFAULT_AS=y
> > # CONFIG_DEFAULT_DEADLINE is not set
> > # CONFIG_DEFAULT_CFQ is not set
> > # CONFIG_DEFAULT_NOOP is not set
> > CONFIG_DEFAULT_IOSCHED="anticipatory"
> >
> > #
> > # Processor
> > #
> > # CONFIG_6xx is not set
> > CONFIG_40x=y
> > # CONFIG_44x is not set
> > # CONFIG_8xx is not set
> > # CONFIG_E200 is not set
> > # CONFIG_E500 is not set
> > CONFIG_MATH_EMULATION=y
> > # CONFIG_KEXEC is not set
> > # CONFIG_CPU_FREQ is not set
> > CONFIG_4xx=y
> > # CONFIG_WANT_EARLY_SERIAL is not set
> >
> > #
> > # IBM 4xx options
> > #
> > # CONFIG_BUBINGA is not set
> > # CONFIG_CPCI405 is not set
> > # CONFIG_EP405 is not set
> > # CONFIG_REDWOOD_5 is not set
> > # CONFIG_REDWOOD_6 is not set
> > # CONFIG_SYCAMORE is not set
> > # CONFIG_WALNUT is not set
> > # CONFIG_XILINX_ML300 is not set
> > CONFIG_XILINX_ML403=y
> > CONFIG_IBM405_ERR77=y
> > CONFIG_IBM405_ERR51=y
> > CONFIG_XILINX_VIRTEX_4_FX=y
> > CONFIG_XILINX_VIRTEX=y
> > CONFIG_EMBEDDEDBOOT=y
> > # CONFIG_PPC4xx_DMA is not set
> > CONFIG_PPC_GEN550=y
> > CONFIG_UART0_TTYS0=y
> > # CONFIG_UART0_TTYS1 is not set
> > CONFIG_NOT_COHERENT_CACHE=y
> >
> > #
> > # Platform options
> > #
> > # CONFIG_PC_KEYBOARD is not set
> > # CONFIG_HIGHMEM is not set
> > # CONFIG_HZ_100 is not set
> > CONFIG_HZ_250=y
> > # CONFIG_HZ_1000 is not set
> > CONFIG_HZ=250
> > CONFIG_PREEMPT_NONE=y
> > # CONFIG_PREEMPT_VOLUNTARY is not set
> > # CONFIG_PREEMPT is not set
> > CONFIG_SELECT_MEMORY_MODEL=y
> > CONFIG_FLATMEM_MANUAL=y
> > # CONFIG_DISCONTIGMEM_MANUAL is not set
> > # CONFIG_SPARSEMEM_MANUAL is not set
> > CONFIG_FLATMEM=y
> > CONFIG_FLAT_NODE_MEM_MAP=y
> > # CONFIG_SPARSEMEM_STATIC is not set
> > CONFIG_SPLIT_PTLOCK_CPUS=4
> > CONFIG_BINFMT_ELF=y
> > # CONFIG_BINFMT_MISC is not set
> > CONFIG_CMDLINE_BOOL=y
> > CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/xsa3 rw"
> > # CONFIG_PM is not set
> > # CONFIG_SOFTWARE_SUSPEND is not set
> > CONFIG_SECCOMP=y
> > CONFIG_ISA_DMA_API=y
> >
> > #
> > # Bus options
> > #
> > # CONFIG_PPC_I8259 is not set
> > # CONFIG_PCI is not set
> > # CONFIG_PCI_DOMAINS is not set
> >
> > #
> > # PCCARD (PCMCIA/CardBus) support
> > #
> > # CONFIG_PCCARD is not set
> >
> > #
> > # Advanced setup
> > #
> > # CONFIG_ADVANCED_OPTIONS is not set
> >
> > #
> > # Default settings for advanced configuration options are used
> > #
> > CONFIG_HIGHMEM_START=0xfe000000
> > CONFIG_LOWMEM_SIZE=0x30000000
> > CONFIG_KERNEL_START=0xc0000000
> > CONFIG_TASK_SIZE=0x80000000
> > CONFIG_CONSISTENT_START=0xff100000
> > CONFIG_CONSISTENT_SIZE=0x00200000
> > CONFIG_BOOT_LOAD=0x00400000
> >
> > #
> > # Networking
> > #
> > CONFIG_NET=y
> >
> > #
> > # Networking options
> > #
> > # CONFIG_NETDEBUG is not set
> > # CONFIG_PACKET is not set
> > CONFIG_UNIX=y
> > # CONFIG_NET_KEY is not set
> > CONFIG_INET=y
> > CONFIG_IP_MULTICAST=y
> > # CONFIG_IP_ADVANCED_ROUTER is not set
> > CONFIG_IP_FIB_HASH=y
> > CONFIG_IP_PNP=y
> > CONFIG_IP_PNP_DHCP=y
> > # CONFIG_IP_PNP_BOOTP is not set
> > # CONFIG_IP_PNP_RARP is not set
> > # CONFIG_NET_IPIP is not set
> > # CONFIG_NET_IPGRE is not set
> > # CONFIG_IP_MROUTE is not set
> > # CONFIG_ARPD is not set
> > CONFIG_SYN_COOKIES=y
> > # CONFIG_INET_AH is not set
> > # CONFIG_INET_ESP is not set
> > # CONFIG_INET_IPCOMP is not set
> > # CONFIG_INET_XFRM_TUNNEL is not set
> > # CONFIG_INET_TUNNEL is not set
> > # CONFIG_INET_DIAG is not set
> > # CONFIG_TCP_CONG_ADVANCED is not set
> > CONFIG_TCP_CONG_BIC=y
> > # CONFIG_IPV6 is not set
> > # CONFIG_INET6_XFRM_TUNNEL is not set
> > # CONFIG_INET6_TUNNEL is not set
> > # CONFIG_NETFILTER is not set
> >
> > #
> > # DCCP Configuration (EXPERIMENTAL)
> > #
> > # CONFIG_IP_DCCP is not set
> >
> > #
> > # SCTP Configuration (EXPERIMENTAL)
> > #
> > # CONFIG_IP_SCTP is not set
> >
> > #
> > # TIPC Configuration (EXPERIMENTAL)
> > #
> > # CONFIG_TIPC is not set
> > # CONFIG_ATM is not set
> > # CONFIG_BRIDGE is not set
> > # CONFIG_VLAN_8021Q is not set
> > # CONFIG_DECNET is not set
> > # CONFIG_LLC2 is not set
> > # CONFIG_IPX is not set
> > # CONFIG_ATALK is not set
> > # CONFIG_X25 is not set
> > # CONFIG_LAPB is not set
> > # CONFIG_NET_DIVERT is not set
> > # CONFIG_ECONET is not set
> > # CONFIG_WAN_ROUTER is not set
> >
> > #
> > # QoS and/or fair queueing
> > #
> > # CONFIG_NET_SCHED is not set
> >
> > #
> > # Network testing
> > #
> > # CONFIG_NET_PKTGEN is not set
> > # CONFIG_HAMRADIO is not set
> > # CONFIG_IRDA is not set
> > # CONFIG_BT is not set
> > # CONFIG_IEEE80211 is not set
> >
> > #
> > # Device Drivers
> > #
> >
> > #
> > # Generic Driver Options
> > #
> > CONFIG_STANDALONE=y
> > CONFIG_PREVENT_FIRMWARE_BUILD=y
> > # CONFIG_FW_LOADER is not set
> > # CONFIG_DEBUG_DRIVER is not set
> >
> > #
> > # Connector - unified userspace <-> kernelspace linker
> > #
> > # CONFIG_CONNECTOR is not set
> >
> > #
> > # Memory Technology Devices (MTD)
> > #
> > CONFIG_MTD=y
> > # CONFIG_MTD_DEBUG is not set
> > # CONFIG_MTD_CONCAT is not set
> > CONFIG_MTD_PARTITIONS=y
> > CONFIG_MTD_REDBOOT_PARTS=y
> > CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> > # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> > # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
> > # CONFIG_MTD_CMDLINE_PARTS is not set
> >
> > #
> > # User Modules And Translation Layers
> > #
> > CONFIG_MTD_CHAR=y
> > CONFIG_MTD_BLOCK=y
> > # CONFIG_FTL is not set
> > # CONFIG_NFTL is not set
> > # CONFIG_INFTL is not set
> > # CONFIG_RFD_FTL is not set
> >
> > #
> > # RAM/ROM/Flash chip drivers
> > #
> > CONFIG_MTD_CFI=y
> > # CONFIG_MTD_JEDECPROBE is not set
> > CONFIG_MTD_GEN_PROBE=y
> > # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> > CONFIG_MTD_MAP_BANK_WIDTH_1=y
> > CONFIG_MTD_MAP_BANK_WIDTH_2=y
> > CONFIG_MTD_MAP_BANK_WIDTH_4=y
> > # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> > # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> > # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> > CONFIG_MTD_CFI_I1=y
> > CONFIG_MTD_CFI_I2=y
> > # CONFIG_MTD_CFI_I4 is not set
> > # CONFIG_MTD_CFI_I8 is not set
> > # CONFIG_MTD_CFI_INTELEXT is not set
> > CONFIG_MTD_CFI_AMDSTD=y
> > # CONFIG_MTD_CFI_STAA is not set
> > CONFIG_MTD_CFI_UTIL=y
> > # CONFIG_MTD_RAM is not set
> > # CONFIG_MTD_ROM is not set
> > # CONFIG_MTD_ABSENT is not set
> > # CONFIG_MTD_OBSOLETE_CHIPS is not set
> >
> > #
> > # Mapping drivers for chip access
> > #
> > # CONFIG_MTD_COMPLEX_MAPPINGS is not set
> > # CONFIG_MTD_PHYSMAP is not set
> > # CONFIG_MTD_PLATRAM is not set
> >
> > #
> > # Self-contained MTD device drivers
> > #
> > # CONFIG_MTD_SLRAM is not set
> > # CONFIG_MTD_PHRAM is not set
> > # CONFIG_MTD_MTDRAM is not set
> > # CONFIG_MTD_BLOCK2MTD is not set
> >
> > #
> > # Disk-On-Chip Device Drivers
> > #
> > # CONFIG_MTD_DOC2000 is not set
> > # CONFIG_MTD_DOC2001 is not set
> > # CONFIG_MTD_DOC2001PLUS is not set
> >
> > #
> > # NAND Flash Device Drivers
> > #
> > # CONFIG_MTD_NAND is not set
> >
> > #
> > # OneNAND Flash Device Drivers
> > #
> > # CONFIG_MTD_ONENAND is not set
> >
> > #
> > # Parallel port support
> > #
> > # CONFIG_PARPORT is not set
> >
> > #
> > # Plug and Play support
> > #
> >
> > #
> > # Block devices
> > #
> > # CONFIG_BLK_DEV_FD is not set
> > # CONFIG_BLK_DEV_COW_COMMON is not set
> > CONFIG_BLK_DEV_LOOP=y
> > # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> > CONFIG_XILINX_SYSACE=y
> > # CONFIG_BLK_DEV_NBD is not set
> > # CONFIG_BLK_DEV_RAM is not set
> > # CONFIG_BLK_DEV_INITRD is not set
> > # CONFIG_CDROM_PKTCDVD is not set
> > # CONFIG_ATA_OVER_ETH is not set
> >
> > #
> > # ATA/ATAPI/MFM/RLL support
> > #
> > # CONFIG_IDE is not set
> >
> > #
> > # SCSI device support
> > #
> > # CONFIG_RAID_ATTRS is not set
> > # CONFIG_SCSI is not set
> >
> > #
> > # Multi-device support (RAID and LVM)
> > #
> > # CONFIG_MD is not set
> >
> > #
> > # Fusion MPT device support
> > #
> > # CONFIG_FUSION is not set
> >
> > #
> > # IEEE 1394 (FireWire) support
> > #
> >
> > #
> > # I2O device support
> > #
> >
> > #
> > # Macintosh device drivers
> > #
> > # CONFIG_WINDFARM is not set
> >
> > #
> > # Network device support
> > #
> > CONFIG_NETDEVICES=y
> > # CONFIG_DUMMY is not set
> > # CONFIG_BONDING is not set
> > # CONFIG_EQUALIZER is not set
> > # CONFIG_TUN is not set
> >
> > #
> > # PHY device support
> > #
> >
> > #
> > # Ethernet (10 or 100Mbit)
> > #
> > # CONFIG_NET_ETHERNET is not set
> > # CONFIG_IBM_EMAC is not set
> >
> > #
> > # Ethernet (1000 Mbit)
> > #
> > CONFIG_XILINX_TEMAC=y
> >
> > #
> > # Ethernet (10000 Mbit)
> > #
> >
> > #
> > # Token Ring devices
> > #
> >
> > #
> > # Wireless LAN (non-hamradio)
> > #
> > # CONFIG_NET_RADIO is not set
> >
> > #
> > # Wan interfaces
> > #
> > # CONFIG_WAN is not set
> > # CONFIG_PPP is not set
> > # CONFIG_SLIP is not set
> > # CONFIG_SHAPER is not set
> > # CONFIG_NETCONSOLE is not set
> > # CONFIG_NETPOLL is not set
> > # CONFIG_NET_POLL_CONTROLLER is not set
> >
> > #
> > # ISDN subsystem
> > #
> > # CONFIG_ISDN is not set
> >
> > #
> > # Telephony Support
> > #
> > # CONFIG_PHONE is not set
> >
> > #
> > # Input device support
> > #
> > CONFIG_INPUT=y
> >
> > #
> > # Userland interfaces
> > #
> > CONFIG_INPUT_MOUSEDEV=y
> > CONFIG_INPUT_MOUSEDEV_PSAUX=y
> > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> > # CONFIG_INPUT_JOYDEV is not set
> > # CONFIG_INPUT_TSDEV is not set
> > # CONFIG_INPUT_EVDEV is not set
> > # CONFIG_INPUT_EVBUG is not set
> >
> > #
> > # Input Device Drivers
> > #
> > # CONFIG_INPUT_KEYBOARD is not set
> > # CONFIG_INPUT_MOUSE is not set
> > # CONFIG_INPUT_JOYSTICK is not set
> > # CONFIG_INPUT_TOUCHSCREEN is not set
> > # CONFIG_INPUT_MISC is not set
> >
> > #
> > # Hardware I/O ports
> > #
> > CONFIG_SERIO=y
> > CONFIG_SERIO_I8042=y
> > CONFIG_SERIO_SERPORT=y
> > # CONFIG_SERIO_RAW is not set
> > # CONFIG_GAMEPORT is not set
> >
> > #
> > # Character devices
> > #
> > CONFIG_VT=y
> > CONFIG_VT_CONSOLE=y
> > CONFIG_HW_CONSOLE=y
> > # CONFIG_SERIAL_NONSTANDARD is not set
> >
> > #
> > # Serial drivers
> > #
> > CONFIG_SERIAL_8250=y
> > CONFIG_SERIAL_8250_CONSOLE=y
> > CONFIG_SERIAL_8250_NR_UARTS=4
> > CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> > # CONFIG_SERIAL_8250_EXTENDED is not set
> >
> > #
> > # Non-8250 serial port support
> > #
> > CONFIG_SERIAL_CORE=y
> > CONFIG_SERIAL_CORE_CONSOLE=y
> > CONFIG_UNIX98_PTYS=y
> > CONFIG_LEGACY_PTYS=y
> > CONFIG_LEGACY_PTY_COUNT=256
> >
> > #
> > # IPMI
> > #
> > # CONFIG_IPMI_HANDLER is not set
> >
> > #
> > # Watchdog Cards
> > #
> > # CONFIG_WATCHDOG is not set
> > # CONFIG_NVRAM is not set
> > # CONFIG_GEN_RTC is not set
> > # CONFIG_DTLK is not set
> > # CONFIG_R3964 is not set
> >
> > #
> > # Ftape, the floppy tape device driver
> > #
> > # CONFIG_AGP is not set
> > # CONFIG_RAW_DRIVER is not set
> >
> > #
> > # TPM devices
> > #
> > # CONFIG_TCG_TPM is not set
> > # CONFIG_TELCLOCK is not set
> >
> > #
> > # I2C support
> > #
> > # CONFIG_I2C is not set
> >
> > #
> > # SPI support
> > #
> > # CONFIG_SPI is not set
> > # CONFIG_SPI_MASTER is not set
> >
> > #
> > # Dallas's 1-wire bus
> > #
> > # CONFIG_W1 is not set
> >
> > #
> > # Hardware Monitoring support
> > #
> > CONFIG_HWMON=y
> > # CONFIG_HWMON_VID is not set
> > # CONFIG_SENSORS_F71805F is not set
> > # CONFIG_HWMON_DEBUG_CHIP is not set
> >
> > #
> > # Misc devices
> > #
> >
> > #
> > # Multimedia devices
> > #
> > # CONFIG_VIDEO_DEV is not set
> > CONFIG_VIDEO_V4L2=y
> >
> > #
> > # Digital Video Broadcasting Devices
> > #
> > # CONFIG_DVB is not set
> >
> > #
> > # Graphics support
> > #
> > # CONFIG_FB is not set
> >
> > #
> > # Console display driver support
> > #
> > CONFIG_DUMMY_CONSOLE=y
> >
> > #
> > # Sound
> > #
> > # CONFIG_SOUND is not set
> >
> > #
> > # USB support
> > #
> > # CONFIG_USB_ARCH_HAS_HCD is not set
> > # CONFIG_USB_ARCH_HAS_OHCI is not set
> > # CONFIG_USB_ARCH_HAS_EHCI is not set
> >
> > #
> > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> > #
> >
> > #
> > # USB Gadget Support
> > #
> > # CONFIG_USB_GADGET is not set
> >
> > #
> > # MMC/SD Card support
> > #
> > # CONFIG_MMC is not set
> >
> > #
> > # LED devices
> > #
> > # CONFIG_NEW_LEDS is not set
> >
> > #
> > # LED drivers
> > #
> >
> > #
> > # LED Triggers
> > #
> >
> > #
> > # InfiniBand support
> > #
> >
> > #
> > # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
> > #
> >
> > #
> > # Real Time Clock
> > #
> > # CONFIG_RTC_CLASS is not set
> > CONFIG_XILINX_EDK=y
> >
> > #
> > # File systems
> > #
> > CONFIG_EXT2_FS=y
> > CONFIG_EXT2_FS_XATTR=y
> > CONFIG_EXT2_FS_POSIX_ACL=y
> > CONFIG_EXT2_FS_SECURITY=y
> > CONFIG_EXT2_FS_XIP=y
> > CONFIG_FS_XIP=y
> > # CONFIG_EXT3_FS is not set
> > CONFIG_FS_MBCACHE=y
> > # CONFIG_REISERFS_FS is not set
> > # CONFIG_JFS_FS is not set
> > CONFIG_FS_POSIX_ACL=y
> > # CONFIG_XFS_FS is not set
> > # CONFIG_OCFS2_FS is not set
> > # CONFIG_MINIX_FS is not set
> > # CONFIG_ROMFS_FS is not set
> > CONFIG_INOTIFY=y
> > # CONFIG_QUOTA is not set
> > CONFIG_DNOTIFY=y
> > CONFIG_AUTOFS_FS=y
> > CONFIG_AUTOFS4_FS=y
> > # CONFIG_FUSE_FS is not set
> >
> > #
> > # CD-ROM/DVD Filesystems
> > #
> > # CONFIG_ISO9660_FS is not set
> > # CONFIG_UDF_FS is not set
> >
> > #
> > # DOS/FAT/NT Filesystems
> > #
> > # CONFIG_MSDOS_FS is not set
> > # CONFIG_VFAT_FS is not set
> > # CONFIG_NTFS_FS is not set
> >
> > #
> > # Pseudo filesystems
> > #
> > CONFIG_PROC_FS=y
> > CONFIG_PROC_KCORE=y
> > CONFIG_SYSFS=y
> > CONFIG_TMPFS=y
> > # CONFIG_HUGETLB_PAGE is not set
> > CONFIG_RAMFS=y
> > # CONFIG_CONFIGFS_FS is not set
> >
> > #
> > # Miscellaneous filesystems
> > #
> > # CONFIG_ADFS_FS is not set
> > # CONFIG_AFFS_FS is not set
> > # CONFIG_HFS_FS is not set
> > # CONFIG_HFSPLUS_FS is not set
> > # CONFIG_BEFS_FS is not set
> > # CONFIG_BFS_FS is not set
> > # CONFIG_EFS_FS is not set
> > # CONFIG_JFFS_FS is not set
> > # CONFIG_JFFS2_FS is not set
> > # CONFIG_CRAMFS is not set
> > # CONFIG_VXFS_FS is not set
> > # CONFIG_HPFS_FS is not set
> > # CONFIG_QNX4FS_FS is not set
> > # CONFIG_SYSV_FS is not set
> > # CONFIG_UFS_FS is not set
> >
> > #
> > # Network File Systems
> > #
> > # CONFIG_NFS_FS is not set
> > # CONFIG_NFSD is not set
> > # CONFIG_SMB_FS is not set
> > # CONFIG_CIFS is not set
> > # CONFIG_NCP_FS is not set
> > # CONFIG_CODA_FS is not set
> > # CONFIG_AFS_FS is not set
> > # CONFIG_9P_FS is not set
> >
> > #
> > # Partition Types
> > #
> > # CONFIG_PARTITION_ADVANCED is not set
> > CONFIG_MSDOS_PARTITION=y
> >
> > #
> > # Native Language Support
> > #
> > CONFIG_NLS=y
> > CONFIG_NLS_DEFAULT="iso8859-1"
> > # CONFIG_NLS_CODEPAGE_437 is not set
> > # CONFIG_NLS_CODEPAGE_737 is not set
> > # CONFIG_NLS_CODEPAGE_775 is not set
> > # CONFIG_NLS_CODEPAGE_850 is not set
> > # CONFIG_NLS_CODEPAGE_852 is not set
> > # CONFIG_NLS_CODEPAGE_855 is not set
> > # CONFIG_NLS_CODEPAGE_857 is not set
> > # CONFIG_NLS_CODEPAGE_860 is not set
> > # CONFIG_NLS_CODEPAGE_861 is not set
> > # CONFIG_NLS_CODEPAGE_862 is not set
> > # CONFIG_NLS_CODEPAGE_863 is not set
> > # CONFIG_NLS_CODEPAGE_864 is not set
> > # CONFIG_NLS_CODEPAGE_865 is not set
> > # CONFIG_NLS_CODEPAGE_866 is not set
> > # CONFIG_NLS_CODEPAGE_869 is not set
> > # CONFIG_NLS_CODEPAGE_936 is not set
> > # CONFIG_NLS_CODEPAGE_950 is not set
> > # CONFIG_NLS_CODEPAGE_932 is not set
> > # CONFIG_NLS_CODEPAGE_949 is not set
> > # CONFIG_NLS_CODEPAGE_874 is not set
> > # CONFIG_NLS_ISO8859_8 is not set
> > # CONFIG_NLS_CODEPAGE_1250 is not set
> > # CONFIG_NLS_CODEPAGE_1251 is not set
> > # CONFIG_NLS_ASCII is not set
> > # CONFIG_NLS_ISO8859_1 is not set
> > # CONFIG_NLS_ISO8859_2 is not set
> > # CONFIG_NLS_ISO8859_3 is not set
> > # CONFIG_NLS_ISO8859_4 is not set
> > # CONFIG_NLS_ISO8859_5 is not set
> > # CONFIG_NLS_ISO8859_6 is not set
> > # CONFIG_NLS_ISO8859_7 is not set
> > # CONFIG_NLS_ISO8859_9 is not set
> > # CONFIG_NLS_ISO8859_13 is not set
> > # CONFIG_NLS_ISO8859_14 is not set
> > # CONFIG_NLS_ISO8859_15 is not set
> > # CONFIG_NLS_KOI8_R is not set
> > # CONFIG_NLS_KOI8_U is not set
> > # CONFIG_NLS_UTF8 is not set
> >
> > #
> > # IBM 40x options
> > #
> >
> > #
> > # Library routines
> > #
> > # CONFIG_CRC_CCITT is not set
> > # CONFIG_CRC16 is not set
> > CONFIG_CRC32=y
> > # CONFIG_LIBCRC32C is not set
> > # CONFIG_PROFILING is not set
> >
> > #
> > # Kernel hacking
> > #
> > # CONFIG_PRINTK_TIME is not set
> > # CONFIG_MAGIC_SYSRQ is not set
> > CONFIG_DEBUG_KERNEL=y
> > CONFIG_LOG_BUF_SHIFT=14
> > CONFIG_DETECT_SOFTLOCKUP=y
> > # CONFIG_SCHEDSTATS is not set
> > # CONFIG_DEBUG_SLAB is not set
> > # CONFIG_DEBUG_MUTEXES is not set
> > # CONFIG_DEBUG_SPINLOCK is not set
> > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> > # CONFIG_DEBUG_KOBJECT is not set
> > CONFIG_DEBUG_INFO=y
> > # CONFIG_DEBUG_FS is not set
> > # CONFIG_DEBUG_VM is not set
> > # CONFIG_UNWIND_INFO is not set
> > CONFIG_FORCED_INLINING=y
> > # CONFIG_RCU_TORTURE_TEST is not set
> > # CONFIG_KGDB is not set
> > # CONFIG_XMON is not set
> > CONFIG_BDI_SWITCH=y
> > # CONFIG_SERIAL_TEXT_DEBUG is not set
> >
> > #
> > # Security options
> > #
> > # CONFIG_KEYS is not set
> > # CONFIG_SECURITY is not set
> >
> > #
> > # Cryptographic options
> > #
> > # CONFIG_CRYPTO is not set
> >
> > #
> > # Hardware crypto devices
> > #
> >

_________________________________________________________________
享用世界上最大的电子邮件系统― MSN Hotmail。  http://www.hotmail.com  