hoe to define CPM_MAP_ADDR ?

[Liu Dave-r63238]

You can refer to the other board config file like MPC8260ADS.

-Dave

> I am trying to take a working embedded linux system from 
> kernel 2.4 to 
> 2.6. The hardware is a custom board using a MPC8270 processor.
> The working system uses u-boot 1.1.1 with linux kernel 2.4.24.
> I am using the same u-boot and I am trying to port linux 
> kernel 2.6.15 
> to our platform. I just wonder hwo to define CPM_MAP_ADDR to 
> my config file
> at /arch/ppc/platforms/olt8270.h,thsi show file context as follow
> 
> #ifndef __OLT8270_PLATFORM
> #define __OLT8270_PLATFORM
> 
> //#define CPM_MAP_ADDR  ((uint)0xf0000000)
> #define IMAP_ADDR  ((uint)0xf0000000)
> 
> #define BOOTROM_RESTART_ADDR ((uint)0xfff00100)
> 
> /* For our show_cpuinfo hooks. */
> #define CPUINFO_VENDOR  "Ocean Broadband Ltd"
> #define CPUINFO_MACHINE  "OLT8270 PowerPC"
> 
> /* A Board Information structure that is given to a program when
>  * prom starts it up.
>  */
> typedef struct bd_info {
>  unsigned long bi_memstart; /* Memory start address */
>  unsigned long
>  bi_memsize;     /* Memory (end) size in bytes */
>  unsigned long bi_flashstart; /* start of FLASH memory */
>  unsigned long bi_flashsize; /* size  of FLASH memory */
>  unsigned long bi_flashoffset; /* reserved area for startup monitor */
>     unsigned long   bi_sramstart;   /* start of SRAM memory */
>     unsigned long   bi_sramsize;    /* size of SRAM memory */
> 
>  unsigned long bi_immr;     /* IMMR when called from boot rom */
> 
>  unsigned long   bi_bootflags;   /* boot flag (for Lynx OS) */
> 
>  unsigned long   bi_ip_addr;     /* IP Address */
>  unsigned char   bi_enetaddr[6]; /* Ethernet address */
>  unsigned short  bi_ethspeed;    /* Ethernet speed in Mbps */
> 
>  unsigned long bi_intfreq;     /* Internal Freq, in Hz */
>  unsigned long bi_busfreq;     /* Bus Freq, in MHz */
>  unsigned long bi_cpmfreq;     /* CPM Freq, in MHz */
>  unsigned long bi_brgfreq;     /* BRG Freq, in MHz */
>  unsigned long bi_sccfreq;     /* SCC Freq, in MHz
>  */
>  unsigned long bi_vco;      /* VCO Out from PLL */
>  unsigned long bi_baudrate; /* Default console baud rate */
> } bd_t;
> 
> extern bd_t m8xx_board_info;
> 
> #endif  /* __OLT8270_PLATFORM */
> 
> 
> 
> Sincerely,
> 
> 
> Jie
> 
> ________________________________
> 
> Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone 
> calls. Great rates starting at 1¢/min. 
> <http://us.rd.yahoo.com/mail_us/taglines/postman7/*http://us.r
> d.yahoo.com/evt=39666/*http://messenger.yahoo.com> 
>