any hints using gcc 3.4.3 for 2.4.25 kernel?

[Gerhard Jaeger]

On Wednesday 23 February 2005 16:38, Bryan O'Donoghue wrote:
> Gerhard Jaeger wrote:
> > On Monday 21 February 2005 15:12, Wojciech Kromer wrote:
> > 
> >>a)first i have:
> >>- 2.4.25 kernel (from denx cvs)
> >>- eldk with 2.95.4 compiler
> >>this one set works fine :)
> >>
> >>b)then, i've tried  to same sources with:
> >>gcc-3.4.3 , self build from uClibc buildroot
> >>new hernel hangs just after decompressing :(
> >>
> >>any tricks?
> >>
> > 
> > 
> > you can use the include/linux/init.h and compiler.h from 2.4.29
> > kernel + patching some header files, where the inlining does not
> > work any longer. I also suggest comparing with 2.4.29 kernel.
> > 
> > ciao,
> > Gerhard
> > 
> 
> If all you want is a cross compiler to make a kernel why not try this 
> procedure ?
> 
> Tested with :
> 
> gcc-3.4.2
> binutils-2.15.90.0.3
> dietlibc-0.28 or dietlibc cvs
> 
> 1
> untar all sources
> 
> 2
> binutils:
> 
> ./configure --prefix=/usr/local/powerpc-linux --target=powerpc-linux
> 
> make
> make install
> 
> 3
> gcc:
> 
> ./configure --prefix=/usr/local/powerpc-linux --target=powerpc-linux 
> --with-ecos --disable-nls --enable-threads=posix --disable-shared 
> --enable-languages=c --with-headers=../dietlibc/include
> 
> make
> make install
> 
> There might be a little error in gcc/unwind-dw2-fde-glibc.c and 
> gcc/unwind-dw2-fde.h
> 
> I can't remember the exact errors in those two files, but, hopefully 
> those should be easy enough to fix.
> 
> Once you work around the slight inconsistency between dietlibc & gcc in 
> those two files, and make install, you should have a full toolchain in 
> /usr/local/powerpc-linux
> 
> I had been thinking about making a small script for kernel people such 
> as yourself, who wanted just a toolchain for kernel cross compiles.
> Maybe I'll do that.
> 
> But, in any case, the above procedure gives me a 3.4.2 which is quite 
> happy to compile a 2.4.28-rc3 (though I haven't tried out the denx 
> 2.4.25... but, I can't see why that would fail).
> 
> Hope this helps.

I'm pretty sure, that it won't help on a 2.4.25 kernel. The 2.4.28-rc3 already
has the needed patches/changes applied, that's why it works for you ;)

ciao,
Gerhard

-- 
Gerhard Jaeger <gjaeger at sysgo.com>            
SYSGO AG                      Embedded and Real-Time Software
www.sysgo.com | www.elinos.com | www.pikeos.com | www.osek.de