pci_enable_device fails on MPC8541

[Kumar Gala]

Bizhan,

A few questions:

1. what kernel version are you using on these boards:
2. can you do an lspci -v on the boards

- kumar

On Aug 8, 2005, at 1:12 PM, Bizhan Gholikhamseh \(((bgholikh\))) wrote:

> Hi All,
> I am using two evaluation board from freescale, 8540ADS and  
> MPC8541. The
> same PCI driver is being compiled and loaded on both platforms. The  
> same
> PCI driver (developed by me) for DSP board compiled and loaded on both
> platforms.
>
> When I type: "insmod C6415.ko" on 8541 board, I get the following  
> error:
> "PCI: Device 0000:02:01.0 not available because of resource  
> collisions"
> This messages is because of the execution of the generic PCI Linux
> command:
> "pci_enable_device(pdev)"
> The same API has no problem on 8540ADS.
>
>
>> From UBOOT I can see my device is on bus 3:
>>
> => pci 3
> Scanning PCI devices on bus 3
> BusDev FUN    VendorID    DeviceID    Device Class    Sub-Class
> ---------------------------------------------------------------------- 
> --
> --------------------
> 03.01.00            0x104c    0xa106        .........
>
> Any idea why the insmod fails on one board and not on the other one?
>
> Many thanks in advance,
> Bizhan
>
> <ATT2118305.txt>
>