Booting Linux using a PlanetCore BootLoader

Tom Rini trini at
Tue Oct 12 04:15:53 EST 2004

On Mon, Oct 11, 2004 at 10:50:54AM -0700, annamaya wrote:

> I loaded a zImage into address 0x100000 in RAM and
> verified that this was indeed an ELF file. I then said
> "go 0x100040" which would start executing the code
> after skipping the 64 bytes of ELF header. But this is
> what I see happen. 

It's 64Kilobytes, so you'd want 0x00110000.  You also might be loading
yourself a bit too low.  The default link address is (assuming this is
2.4 and I'm still recalling right) 0x00200000, so you might as well load
things there.

Tom Rini

More information about the Linuxppc-embedded mailing list