"mkimage" not found

Ing.Gianfranco Morandi (LAN) gianfranco.morandi at euro-studio.it
Fri Mar 5 20:10:53 EST 2004

Dear Wolfgang

> Maybe your PATH ist not correct?

You are perfectly right! I didn't add the line "export
PATH=$PATH:/opt/eldk/usr/bin"  to .bashrc.
Many thanks

> > With the previous ELDK2.0 I would have generated the image with the
> > pImage" command while now I suppose the command "make uImage" must be
> > Is this correct?
> This is correct, but "make pImage" will still work, too.

unfortunately I had the following messages:

[gianfranco at home001 linux]$ make pImage
make: *** No rule to make target `pImage'.  Stop.
[gianfranco at home001 linux]$ grep -r pImage *
arch/ppc/boot/Makefile:pImage: $(MKIMAGE) images/vmlinux.gz
[gianfranco at home001 linux]$ grep -r uImage *
arch/ppc/boot/Makefile:uImage  \
arch/ppc/boot/Makefile: ln -sf vmlinux.UBoot images/uImage
arch/ppc/Makefile:BOOT_TARGETS = zImage zImage.initrd znetboot
znetboot.initrd uImage
CHANGELOG:Add support for U-Boot boot image "uImage"
[gianfranco at home001 linux]$

Should I modify BOOT_TARGET into arch/ppc/Makefile?

Best regards

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

More information about the Linuxppc-embedded mailing list