[PATCH][RFC] Second version of MPC10x OCP

[Kumar Gala]

On Jun 24, 2004, at 11:36 AM, Adrian Cox wrote:

> On Thu, 2004-06-24 at 04:32, Kumar Gala wrote:
>> I'm confused are we adding the OCP struct for every 10x device?  Did
>> we
>> get closure on the question if 105, 106 & 8240 would also work?
>
> According to the chip manuals:
> 107, 8240, and 8245 have the internal peripherals and should work.
> 105 and 106 don't have internal peripherals.
>
> mpc10x_common.c supports 106, 107, 8240, and 8245, but does not support
> 105.
>
> The code only adds the OCP devices if the device is not 106.
>
> My patch is slightly broken where I edited out a local board variant by
> hand. I'll produce a cleaned up patch based on my Sandpoint tree once
> I've tested it together with the 85xx I2C driver.

Ok, I think the 1st patch had this code, and 2nd seemed to lose it (or
I did not see it).

- kumar


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/