[PATCH][RFC] Second version of MPC10x OCP

[Adrian Cox]

On Thu, 2004-06-24 at 04:32, Kumar Gala wrote:
> I'm confused are we adding the OCP struct for every 10x device?  Did we
> get closure on the question if 105, 106 & 8240 would also work?

According to the chip manuals:
107, 8240, and 8245 have the internal peripherals and should work.
105 and 106 don't have internal peripherals.

mpc10x_common.c supports 106, 107, 8240, and 8245, but does not support
105.

The code only adds the OCP devices if the device is not 106.

My patch is slightly broken where I edited out a local board variant by
hand. I'll produce a cleaned up patch based on my Sandpoint tree once
I've tested it together with the 85xx I2C driver.

- Adrian Cox
Humboldt Solutions Ltd.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/