PPCBoot on Ebony board

[Chris Zimman]

On Tue, Jul 15, 2003 at 02:11:07PM -0400, Brian Padalino wrote:
>
> I am trying to transfer PPCBoot that I had compiled over a tftp session in
> the 440GP 1.18 ROM Monitor (02/11/02) that came on the Ebony board.  Is that
> the wrong method of trying it?  I tried using both serial ports and Kermit
> with Xon/Xoff handshaking, but it just ended up timing out.
>
> I keep getting the error:
>   Loading file "C:\ppc\bootp\boot.img" ...
>   Sending tftp boot request ...
>   Not a valid boot image file
>
> Which stems from an improper magic number at the top of the file to say it's
> a valid boot image.

This is not going to work.  You want to program PPCBoot into flash via a
flash programmer or via JTAG.

--Chris

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/