[PATCH 2/2] dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports

[Christophe Leroy (CS GROUP)]

Le 08/01/2026 à 20:02, Rob Herring a écrit :
> On Wed, Jan 07, 2026 at 05:59:10PM +0100, Christophe Leroy (CS GROUP) wrote:
>> The QUICC Engine provides interrupts for a few I/O ports. This is
>> handled via a separate interrupt ID and managed via a triplet of
>> dedicated registers hosted by the SoC.
>>
>> Implement an interrupt driver for it so that those IRQs can then
>> be linked to the related GPIOs.
>>
>> Signed-off-by: Christophe Leroy (CS GROUP) <chleroy at kernel.org>
>> Acked-by: Conor Dooley <conor.dooley at microchip.com>
> 
> Already? On a v1?

This is extracted from a previous series, here: 
https://lore.kernel.org/all/67987bbf42344398709949cb53e3e8415260ec09.1758212309.git.christophe.leroy@csgroup.eu/

Should I have called it v7 even if it is only a small part of the 
initial series ?

Ack is here: 
https://lore.kernel.org/all/20250818-babbling-studio-81a974afc169@spud/

> 
>> ---
>>   .../soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml       | 51 +++++++++++++++++++
>>   1 file changed, 51 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
>> new file mode 100644
>> index 0000000000000..1f3c652b1569d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
>> @@ -0,0 +1,51 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fsoc%2Ffsl%2Fcpm_qe%2Ffsl%2Cqe-ports-ic.yaml%23&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7C6e4c1b33836d4443b5c608de4ee86aff%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C639034957294961534%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=mH5SPbAw48C6BGcazDPJMtoiM71TXswUGBvSZf15dUQ%3D&reserved=0
>> +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7C6e4c1b33836d4443b5c608de4ee86aff%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C639034957294990994%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=RhD807Jcx3MerOAXGWuwgwHkATpTzTkDIQC7lO3t1AA%3D&reserved=0
>> +
>> +title: Freescale QUICC Engine I/O Ports Interrupt Controller
>> +
>> +maintainers:
>> +  - Christophe Leroy (CS GROUP) <chleroy at kernel.org>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - fsl,mpc8323-qe-ports-ic
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupt-controller: true
>> +
>> +  '#address-cells':
>> +    const: 0
>> +
>> +  '#interrupt-cells':
>> +    const: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupt-controller
>> +  - '#address-cells'
>> +  - '#interrupt-cells'
>> +  - interrupts
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    interrupt-controller at c00 {
>> +      compatible = "fsl,mpc8323-qe-ports-ic";
>> +      reg = <0xc00 0x18>;
>> +      interrupt-controller;
>> +      #address-cells = <0>;
>> +      #interrupt-cells = <1>;
>> +      interrupts = <74 0x8>;
>> +      interrupt-parent = <&ipic>;
> 
> This doesn't look like a separate block, but just part of its parent. So
> just add interrupt-controller/#interrupt-cells to the parent.

I don't understand what you mean, can you explain with the extract below ?

Extract from device tree including the parent:

	soc8321 at b0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <0x0 0xb0000000 0x00100000>;
		reg = <0xb0000000 0x00000200>;
		bus-frequency = <0>;

		ipic:pic at 700 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x700 0x100>;
			device_type = "ipic";
		};

		qepic:interrupt-controller at c00 {
			compatible = "fsl,mpc8323-qe-ports-ic";
			reg = <0xc00 0x18>;
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <1>;
			interrupts = <74 0x8>;
			interrupt-parent = <&ipic>;
		};
	};


Thanks
Christophe