[PATCH 2/2] dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports

[Rob Herring]

On Wed, Jan 07, 2026 at 05:59:10PM +0100, Christophe Leroy (CS GROUP) wrote:
> The QUICC Engine provides interrupts for a few I/O ports. This is
> handled via a separate interrupt ID and managed via a triplet of
> dedicated registers hosted by the SoC.
> 
> Implement an interrupt driver for it so that those IRQs can then
> be linked to the related GPIOs.
> 
> Signed-off-by: Christophe Leroy (CS GROUP) <chleroy at kernel.org>
> Acked-by: Conor Dooley <conor.dooley at microchip.com>

Already? On a v1?

> ---
>  .../soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml       | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
> new file mode 100644
> index 0000000000000..1f3c652b1569d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale QUICC Engine I/O Ports Interrupt Controller
> +
> +maintainers:
> +  - Christophe Leroy (CS GROUP) <chleroy at kernel.org>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,mpc8323-qe-ports-ic
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#address-cells':
> +    const: 0
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupt-controller
> +  - '#address-cells'
> +  - '#interrupt-cells'
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    interrupt-controller at c00 {
> +      compatible = "fsl,mpc8323-qe-ports-ic";
> +      reg = <0xc00 0x18>;
> +      interrupt-controller;
> +      #address-cells = <0>;
> +      #interrupt-cells = <1>;
> +      interrupts = <74 0x8>;
> +      interrupt-parent = <&ipic>;

This doesn't look like a separate block, but just part of its parent. So 
just add interrupt-controller/#interrupt-cells to the parent.

Rob