[PATCH 2/2] dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports

[Rob Herring]

On Thu, Jan 8, 2026 at 1:44 PM Christophe Leroy (CS GROUP)
<chleroy at kernel.org> wrote:
>
>
>
> Le 08/01/2026 à 20:02, Rob Herring a écrit :
> > On Wed, Jan 07, 2026 at 05:59:10PM +0100, Christophe Leroy (CS GROUP) wrote:
> >> The QUICC Engine provides interrupts for a few I/O ports. This is
> >> handled via a separate interrupt ID and managed via a triplet of
> >> dedicated registers hosted by the SoC.
> >>
> >> Implement an interrupt driver for it so that those IRQs can then
> >> be linked to the related GPIOs.
> >>
> >> Signed-off-by: Christophe Leroy (CS GROUP) <chleroy at kernel.org>
> >> Acked-by: Conor Dooley <conor.dooley at microchip.com>
> >
> > Already? On a v1?
>
> This is extracted from a previous series, here:
> https://lore.kernel.org/all/67987bbf42344398709949cb53e3e8415260ec09.1758212309.git.christophe.leroy@csgroup.eu/
>
> Should I have called it v7 even if it is only a small part of the
> initial series ?

Probably. Otherwise, b4 might think v6 is newer.

Regardless, the history matters.

>
> Ack is here:
> https://lore.kernel.org/all/20250818-babbling-studio-81a974afc169@spud/
>
> >
> >> ---
> >>   .../soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml       | 51 +++++++++++++++++++
> >>   1 file changed, 51 insertions(+)
> >>   create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
> >> new file mode 100644
> >> index 0000000000000..1f3c652b1569d
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
> >> @@ -0,0 +1,51 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fsoc%2Ffsl%2Fcpm_qe%2Ffsl%2Cqe-ports-ic.yaml%23&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7C6e4c1b33836d4443b5c608de4ee86aff%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C639034957294961534%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=mH5SPbAw48C6BGcazDPJMtoiM71TXswUGBvSZf15dUQ%3D&reserved=0
> >> +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C02%7Cchristophe.leroy%40csgroup.eu%7C6e4c1b33836d4443b5c608de4ee86aff%7C8b87af7d86474dc78df45f69a2011bb5%7C0%7C0%7C639034957294990994%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=RhD807Jcx3MerOAXGWuwgwHkATpTzTkDIQC7lO3t1AA%3D&reserved=0
> >> +
> >> +title: Freescale QUICC Engine I/O Ports Interrupt Controller
> >> +
> >> +maintainers:
> >> +  - Christophe Leroy (CS GROUP) <chleroy at kernel.org>
> >> +
> >> +properties:
> >> +  compatible:
> >> +    enum:
> >> +      - fsl,mpc8323-qe-ports-ic
> >> +
> >> +  reg:
> >> +    maxItems: 1
> >> +
> >> +  interrupt-controller: true
> >> +
> >> +  '#address-cells':
> >> +    const: 0
> >> +
> >> +  '#interrupt-cells':
> >> +    const: 1
> >> +
> >> +  interrupts:
> >> +    maxItems: 1
> >> +
> >> +required:
> >> +  - compatible
> >> +  - reg
> >> +  - interrupt-controller
> >> +  - '#address-cells'
> >> +  - '#interrupt-cells'
> >> +  - interrupts
> >> +
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> +  - |
> >> +    interrupt-controller at c00 {
> >> +      compatible = "fsl,mpc8323-qe-ports-ic";
> >> +      reg = <0xc00 0x18>;
> >> +      interrupt-controller;
> >> +      #address-cells = <0>;
> >> +      #interrupt-cells = <1>;
> >> +      interrupts = <74 0x8>;
> >> +      interrupt-parent = <&ipic>;
> >
> > This doesn't look like a separate block, but just part of its parent. So
> > just add interrupt-controller/#interrupt-cells to the parent.
>
> I don't understand what you mean, can you explain with the extract below ?
>
> Extract from device tree including the parent:
>
>         soc8321 at b0000000 {
>                 #address-cells = <1>;
>                 #size-cells = <1>;
>                 device_type = "soc";
>                 compatible = "simple-bus";
>                 ranges = <0x0 0xb0000000 0x00100000>;
>                 reg = <0xb0000000 0x00000200>;
>                 bus-frequency = <0>;
>
>                 ipic:pic at 700 {
>                         interrupt-controller;
>                         #address-cells = <0>;
>                         #interrupt-cells = <2>;
>                         reg = <0x700 0x100>;
>                         device_type = "ipic";
>                 };
>
>                 qepic:interrupt-controller at c00 {
>                         compatible = "fsl,mpc8323-qe-ports-ic";
>                         reg = <0xc00 0x18>;
>                         interrupt-controller;
>                         #address-cells = <0>;
>                         #interrupt-cells = <1>;
>                         interrupts = <74 0x8>;
>                         interrupt-parent = <&ipic>;

There's not some overall QuiccEngine node/device? I guess that's
qe at e0100000, so this is outside of it and is fine. Just move it to
bindings/interrupt-controller/ since it is not part of anything else.

Rob