[PATCH RESEND net-next 4/9] net: systemport: use the new fixed PHY helpers

[Florian Fainelli]

2014-05-21 14:55 GMT-07:00 Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>:
> On 05/22/2014 01:38 AM, Florian Fainelli wrote:
>
>> of_phy_connect_fixed_link() is becoming obsolete, and also required
>> platform code to register the fixed PHYs at the specified addresses for
>> those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
>> plus of_phy_register_fixed_link() helpers to transition over the new
>> scheme.
>
>
>> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
>> ---
>>   drivers/net/ethernet/broadcom/bcmsysport.c | 17 +++++++++++++++--
>>   drivers/net/ethernet/broadcom/bcmsysport.h |  1 +
>>   2 files changed, 16 insertions(+), 2 deletions(-)
>
>
>> diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c
>> b/drivers/net/ethernet/broadcom/bcmsysport.c
>> index d40c5b969e9e..dc708a888f80 100644
>> --- a/drivers/net/ethernet/broadcom/bcmsysport.c
>> +++ b/drivers/net/ethernet/broadcom/bcmsysport.c
>> @@ -1327,8 +1327,8 @@ static int bcm_sysport_open(struct net_device *dev)
>>         /* Read CRC forward */
>>         priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
>>
>> -       priv->phydev = of_phy_connect_fixed_link(dev,
>> bcm_sysport_adj_link,
>> -
>> priv->phy_interface);
>> +       priv->phydev = of_phy_connect(dev, priv->phy_dn,
>> bcm_sysport_adj_link,
>> +                                       0, priv->phy_interface);
>
>
>    The continuation line should start on the next character after ( on the
> above line, according to the networking coding style.

Unless I am once again not following the coding style, the patch in
patchwork has this correctly, and so does my file locally:

http://patchwork.ozlabs.org/patch/351323/
-- 
Florian