[PATCH RESEND net-next 4/9] net: systemport: use the new fixed PHY helpers

[Sergei Shtylyov]

On 05/22/2014 01:38 AM, Florian Fainelli wrote:

> of_phy_connect_fixed_link() is becoming obsolete, and also required
> platform code to register the fixed PHYs at the specified addresses for
> those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
> plus of_phy_register_fixed_link() helpers to transition over the new
> scheme.

> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
> ---
>   drivers/net/ethernet/broadcom/bcmsysport.c | 17 +++++++++++++++--
>   drivers/net/ethernet/broadcom/bcmsysport.h |  1 +
>   2 files changed, 16 insertions(+), 2 deletions(-)

> diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
> index d40c5b969e9e..dc708a888f80 100644
> --- a/drivers/net/ethernet/broadcom/bcmsysport.c
> +++ b/drivers/net/ethernet/broadcom/bcmsysport.c
> @@ -1327,8 +1327,8 @@ static int bcm_sysport_open(struct net_device *dev)
>   	/* Read CRC forward */
>   	priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
>
> -	priv->phydev = of_phy_connect_fixed_link(dev, bcm_sysport_adj_link,
> -							priv->phy_interface);
> +	priv->phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link,
> +					0, priv->phy_interface);

    The continuation line should start on the next character after ( on the 
above line, according to the networking coding style.

[...]

WBR, Sergei