[PATCH RESEND net-next 4/9] net: systemport: use the new fixed PHY helpers

[Sergei Shtylyov]

Hello.

On 05/22/2014 02:02 AM, Florian Fainelli wrote:

>>> of_phy_connect_fixed_link() is becoming obsolete, and also required
>>> platform code to register the fixed PHYs at the specified addresses for
>>> those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
>>> plus of_phy_register_fixed_link() helpers to transition over the new
>>> scheme.

>>> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
>>> ---
>>>    drivers/net/ethernet/broadcom/bcmsysport.c | 17 +++++++++++++++--
>>>    drivers/net/ethernet/broadcom/bcmsysport.h |  1 +
>>>    2 files changed, 16 insertions(+), 2 deletions(-)

>>> diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c
>>> b/drivers/net/ethernet/broadcom/bcmsysport.c
>>> index d40c5b969e9e..dc708a888f80 100644
>>> --- a/drivers/net/ethernet/broadcom/bcmsysport.c
>>> +++ b/drivers/net/ethernet/broadcom/bcmsysport.c
>>> @@ -1327,8 +1327,8 @@ static int bcm_sysport_open(struct net_device *dev)
>>>          /* Read CRC forward */
>>>          priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
>>>
>>> -       priv->phydev = of_phy_connect_fixed_link(dev,
>>> bcm_sysport_adj_link,
>>> -
>>> priv->phy_interface);
>>> +       priv->phydev = of_phy_connect(dev, priv->phy_dn,
>>> bcm_sysport_adj_link,
>>> +                                       0, priv->phy_interface);

>>     The continuation line should start on the next character after ( on the
>> above line, according to the networking coding style.

> Unless I am once again not following the coding style, the patch in
> patchwork has this correctly, and so does my file locally:

> http://patchwork.ozlabs.org/patch/351323/

    Don't know about your local file but the patchwork still has the 
indentation wrong. -- you've used only tabs while the last several characters 
should have been spaces. However, if David himself finds it correct, I guess I 
just need to shut up. :-)

WBR, Sergei