[PATCH 2/2] powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards

[Li Yang]

On Fri, Feb 6, 2009 at 4:10 AM, Anton Vorontsov
<avorontsov at ru.mvista.com> wrote:
> TSEC0 is connected to Vitesse 7385 5-port switch. The switch
> isn't connected to any mdio bus, the link to the switch is fixed
> to Full-duplex 1000 Mb/s (no pause).

It's a complex case for RDB boards.  The revision A and revision B
boards DO always connect TSEC0 to Vitesse switch.  While the latest
revision C board has one setting to connect TSEC0 to a Marvell PHY and
MDIO bus.  In BSP we have several DTS's for each setting of the board,
shouldn't we do the same for upstream?

- Leo