[PATCH 2/2] powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards

[Kumar Gala]

On Feb 5, 2009, at 2:10 PM, Anton Vorontsov wrote:

> TSEC0 is connected to Vitesse 7385 5-port switch. The switch
> isn't connected to any mdio bus, the link to the switch is fixed
> to Full-duplex 1000 Mb/s (no pause).
>
> This patch fixes following failure during bootup:
>
> mdio at 24520:01 not found
> eth0: Could not attach to PHY
> IP-Config: Failed to open eth0
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
> arch/powerpc/boot/dts/mpc8313erdb.dts           |    9 ++-------
> arch/powerpc/configs/83xx/mpc8313_rdb_defconfig |    2 +-
> 2 files changed, 3 insertions(+), 8 deletions(-)


applied to merge

- k