A question about zImage when booting from HD

[Simone Piccardi]

I'm using /dev/sda3 to boot, but I tried anyway to zero it to see if
something change, but without success. I give a dd if=/dev/zero
of=/dev/sda3 count=100 and then I copied again zImage in the partition,
but the result was the same of before. 

Before erasing all my system I would like to be sure that if I use
/dev/sda1 it will work. My board is a MVME2432 with a MPC101 PCI
mezzanine card.

Thanks
-- 
Simone Piccardi
Microsoft is NOT the answer. Microsoft is the Question.
The answer is: "NO!"

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/