kernel 2.2.0-pre4
Kevin Puetz
kp11901 at cedarnet.org
Sat Jan 16 10:33:35 EST 1999
This happened to me too, though only when using a quik name for it (as
opposed to typing the full path/command. I'm going to try some more to debug
this, but...
Typing this same command at the quik prompt did not have the problem. Any
ideas? G3/233 DT (rev 1), quik 1.3.1,
My command is
image=/boot/vmlinux_010799
label=benh
root=/dev/hda7
append=" video=atyfb:vmode:17,cmode:16"
--
+--------------------------------------------------------------------+
| .-'''''-. Kevin Puetz |
| .' _/| `. |
| : =/_/ : kp11901 at cedarnet.org -preferred |
| : _/ | : Kevin.Puetz at 039-server.pls.uni.edu |
| (\ / ,| : webmaster at 039-server.pls.uni.edu |
| \\/^\/||__ : |
| _/~`~`""~`"` \_ .' "Could you please continue the petty |
| __/ -'/ `-._ `\_\__ bickering? I find it - most intriguing." |
|/ /-'` `\ \ \-.\ --Data, STTNG, "Haven" |
+--------------------------------------------------------------------+
----------
>From: fritzwe.linux at tamedia.ch
>To: linuxppc-user at lists.linuxppc.ORG
>Subject: kernel 2.2.0-pre4
>Date: Fri, Jan 15, 1999, 3:29 AM
>
>
> Hi,
>
> I'm trying this kernel I've found at http://calvaweb.calvacom.fr/bh40
> because of the support for my AHA2940UW and the 3-button mouse I've
> missed so badly in 2.1.25.
>
> The line "Welcome to Linux, kernel 2.2.0-pre4 booting..." appears and
> that's it.
>
> I've put vmlinux into the System Folder.
>
> BootX 1.0.1 is configured as follows:
> boot device: sdc4 (thats the UW-scsi drive where the System
> Folder is located)
> More kernel arguments: root=/dev/sda4 swap=/dev/sda5 vmode=14 cmode=8
> (/dev/sda is attached to the internal scsi).
>
> The Mac is a 7200/90
>
> Fritz
> ----------------------------------
> Date: 15-Jan-99
> Time: 09:50:45
>
> TA-Media AG Phone +41 1 248 4732
> Telematik Fax +41 1 248 5152
> Fritz Wettstein
>
> This message was sent by XFMail
> ----------------------------------
>
> [[ This message was sent via the linuxppc-user mailing list. Replies are ]]
> [[ not forced back to the list, so be sure to Cc linuxppc-user if your ]]
> [[ reply is of general interest. To unsubscribe from linuxppc-user, send ]]
> [[ the message 'unsubscribe' to linuxppc-user-request at lists.linuxppc.org ]]
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request at lists.linuxppc.org ]]
More information about the Linuxppc-dev
mailing list