February 2022 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Feb 1 15:04:31 AEDT 2022
Ending: Mon Feb 28 23:19:17 AEDT 2022
Messages: 215

• [PATCH -next] media: aspeed: Remove duplicated include in aspeed-video.c   Yang Li
• [PATCH 0/2] firmware: Add boot information to sysfs   Joel Stanley
• [PATCH 1/2] firmware: Add boot information sysfs   Joel Stanley
• [PATCH 2/2] ARM: aspeed: Add secure boot controller support   Joel Stanley
• [PATCH next] docs/ABI: testing: aspeed-uart-routing: Escape asterisk   Joel Stanley
• [PATCH 2/2] ARM: aspeed: Add secure boot controller support   Greg Kroah-Hartman
• [PATCH 0/2] firmware: Add boot information to sysfs   Greg Kroah-Hartman
• [PATCH v7 00/13] Introduce PECI subsystem   Iwona Winiarska
• [PATCH v7 01/13] dt-bindings: Add generic bindings for PECI   Iwona Winiarska
• [PATCH v7 02/13] dt-bindings: Add bindings for peci-aspeed   Iwona Winiarska
• [PATCH v7 03/13] ARM: dts: aspeed: Add PECI controller nodes   Iwona Winiarska
• [PATCH v7 04/13] peci: Add core infrastructure   Iwona Winiarska
• [PATCH v7 05/13] peci: Add peci-aspeed controller driver   Iwona Winiarska
• [PATCH v7 06/13] peci: Add device detection   Iwona Winiarska
• [PATCH v7 07/13] peci: Add sysfs interface for PECI bus   Iwona Winiarska
• [PATCH v7 08/13] peci: Add support for PECI device drivers   Iwona Winiarska
• [PATCH v7 09/13] peci: Add peci-cpu driver   Iwona Winiarska
• [PATCH v7 10/13] hwmon: peci: Add cputemp driver   Iwona Winiarska
• [PATCH v7 11/13] hwmon: peci: Add dimmtemp driver   Iwona Winiarska
• [PATCH v7 12/13] docs: hwmon: Document PECI drivers   Iwona Winiarska
• [PATCH v7 13/13] docs: Add PECI documentation   Iwona Winiarska
• [PATCH 2/2] ARM: aspeed: Add secure boot controller support   Joel Stanley
• [PATCH v2 0/3] firmware: Add boot information to sysfs   Joel Stanley
• [PATCH v2 1/3] firmware: Add boot information to sysfs   Joel Stanley
• [PATCH v2 2/3] ARM: aspeed: Add secure boot controller support   Joel Stanley
• [PATCH v2 3/3] x86/setup: Populate bootinfo with secure boot status   Joel Stanley
• [PATCH v2 1/3] firmware: Add boot information to sysfs   Greg Kroah-Hartman
• [PATCH v2 1/3] firmware: Add boot information to sysfs   Robin Murphy
• [PATCH v2 1/3] firmware: Add boot information to sysfs   Joel Stanley
• [PATCH v2 1/3] firmware: Add boot information to sysfs   Joel Stanley
• [PATCH v3 0/3] firmware: Add boot information to sysfs   Joel Stanley
• [PATCH v3 1/3] firmware: Add boot information to sysfs   Joel Stanley
• [PATCH v3 2/3] ARM: aspeed: Add secure boot controller support   Joel Stanley
• [PATCH v3 3/3] x86/setup: Populate bootinfo with secure boot status   Joel Stanley
• [PATCH v7 02/13] dt-bindings: Add bindings for peci-aspeed   Rob Herring
• [PATCH next] docs/ABI: testing: aspeed-uart-routing: Escape asterisk   ChiaWei Wang
• [PATCH v2 1/3] firmware: Add boot information to sysfs   Daniel Axtens
• [bug report] pinctrl: aspeed: Improve debug output   Dan Carpenter
• [PATCH] fsi: Add trace events in initialization path   Eddie James
• [PATCH] fsi: Add trace events in initialization path   Steven Rostedt
• [PATCH] mtd: aspeed-smc: improve probe resilience   Cédric Le Goater
• [PATCH v6 2/9] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver   Lee Jones
• [PATCH v7 07/13] peci: Add sysfs interface for PECI bus   Greg Kroah-Hartman
• [PATCH v7 07/13] peci: Add sysfs interface for PECI bus   Joel Stanley
• [PATCH v7 07/13] peci: Add sysfs interface for PECI bus   Greg Kroah-Hartman
• [PATCH v7 07/13] peci: Add sysfs interface for PECI bus   Winiarska, Iwona
• [PATCH v8 00/13] Introduce PECI subsystem   Iwona Winiarska
• [PATCH v8 01/13] dt-bindings: Add generic bindings for PECI   Iwona Winiarska
• [PATCH v8 02/13] dt-bindings: Add bindings for peci-aspeed   Iwona Winiarska
• [PATCH v8 03/13] ARM: dts: aspeed: Add PECI controller nodes   Iwona Winiarska
• [PATCH v8 04/13] peci: Add core infrastructure   Iwona Winiarska
• [PATCH v8 05/13] peci: Add peci-aspeed controller driver   Iwona Winiarska
• [PATCH v8 06/13] peci: Add device detection   Iwona Winiarska
• [PATCH v8 07/13] peci: Add sysfs interface for PECI bus   Iwona Winiarska
• [PATCH v8 08/13] peci: Add support for PECI device drivers   Iwona Winiarska
• [PATCH v8 09/13] peci: Add peci-cpu driver   Iwona Winiarska
• [PATCH v8 10/13] hwmon: peci: Add cputemp driver   Iwona Winiarska
• [PATCH v8 11/13] hwmon: peci: Add dimmtemp driver   Iwona Winiarska
• [PATCH v8 12/13] docs: hwmon: Document PECI drivers   Iwona Winiarska
• [PATCH v8 13/13] docs: Add PECI documentation   Iwona Winiarska
• [PATCH] mtd: aspeed-smc: improve probe resilience   Pratyush Yadav
• [PATCH v8 00/13] Introduce PECI subsystem   Joel Stanley
• [PATCH net] net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE   Joel Stanley
• [PATCH] serial: 8259: replace snprintf with sysfs_emit   davidcomponentone at gmail.com
• [PATCH net] net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE   Andrew Lunn
• [PATCH v1] media: aspeed: Fix incorrect color   Jammy Huang
• [PATCH net] net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE   Andrew Jeffery
• [PATCH v1] media: aspeed: Fix incorrect color   Paul Menzel
• [PATCH v1] media: aspeed: Fix incorrect color   Jammy Huang
• [PATCH] serial: 8259: replace snprintf with sysfs_emit   Andy Shevchenko
• [PATCH v2] media: aspeed: Use full swing as JFIF to fix incorrect color   Jammy Huang
• [PATCH v2] media: aspeed: Use full swing as JFIF to fix incorrect color   Paul Menzel
• [PATCH v3 1/1] arch: arm: dts: update bletchley dts   Potin Lai
• [PATCH net] net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE   patchwork-bot+netdevbpf at kernel.org
• [PATCH v3 1/1] arch: arm: dts: update bletchley dts   Rob Herring
• [PATCH v3 1/1] arch: arm: dts: update bletchley dts   POTIN LAI
• [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Zev Weiss
• [PATCH v2] media: aspeed: Use full swing as JFIF to fix incorrect color   Jammy Huang
• [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Greg Kroah-Hartman
• [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Zev Weiss
• [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Greg Kroah-Hartman
• [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Zev Weiss
• [PATCH v3] media: aspeed: Use full swing as JFIF to fix incorrect color   Jammy Huang
• [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit   davidcomponentone at gmail.com
• [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Greg Kroah-Hartman
• [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Andy Shevchenko
• [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit   Andy Shevchenko
• [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit   Johan Hovold
• [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Zev Weiss
• [PATCH 00/10] arch: arm: dts: update Facebook Bletchley BMC   Potin Lai
• [PATCH 01/10] arch: arm: dts: bletchley: switch sled numbering to 1-based   Potin Lai
• [PATCH 02/10] arch: arm: dts: bletchley: separate leds into multiple groups   Potin Lai
• [PATCH 03/10] arch: arm: dts: bletchley: update gpio-line-names   Potin Lai
• [PATCH 04/10] arch: arm: dts: bletchley: update fmc configurations   Potin Lai
• [PATCH 05/10] arch: arm: dts: bletchley: switch to spi-gpio for spi2   Potin Lai
• [PATCH 06/10] arch: arm: dts: bletchley: add interrupt support for sled io expander   Potin Lai
• [PATCH 07/10] arch: arm: dts: bletchley: add shunt-resistor for ADM1278   Potin Lai
• [PATCH 08/10] arch: arm: dts: bletchley: add INA230 sensor on each sled   Potin Lai
• [PATCH 09/10] arch: arm: dts: bletchley: enable mdio3 bus   Potin Lai
• [PATCH 10/10] arch: arm: dts: bletchley: cleanup redundant node   Potin Lai
• [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Andy Shevchenko
• [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Zev Weiss
• [PATCH 03/10] arch: arm: dts: bletchley: update gpio-line-names   Patrick Williams
• [PATCH 10/10] arch: arm: dts: bletchley: cleanup redundant node   Patrick Williams
• [PATCH 00/10] arch: arm: dts: update Facebook Bletchley BMC   Patrick Williams
• [PATCH 1/1] watchdog: aspeed: add nowayout support   Eduardo Valentin
• [PATCH v3] serial: 8250_aspeed_vuart: replace snprintf with sysfs_emit   davidcomponentone at gmail.com
• [PATCH 1/1] watchdog: aspeed: add nowayout support   Guenter Roeck
• [PATCH] drm/aspeed: Use of_device_get_match_data()   cgel.zte at gmail.com
• [PATCH] media: aspeed: Use of_device_get_match_data() helper   Jammy Huang
• [PATCH v2 00/10] update Facebook Bletchley BMC   Potin Lai
• [PATCH v2 01/10] arch: arm: dts: bletchley: switch sled numbering to 1-based   Potin Lai
• [PATCH v2 02/10] arch: arm: dts: bletchley: separate leds into multiple groups   Potin Lai
• [PATCH v2 03/10] arch: arm: dts: bletchley: update gpio-line-names   Potin Lai
• [PATCH v2 04/10] arch: arm: dts: bletchley: update fmc configurations   Potin Lai
• [PATCH v2 05/10] arch: arm: dts: bletchley: switch to spi-gpio for spi2   Potin Lai
• [PATCH v2 06/10] arch: arm: dts: bletchley: add interrupt support for sled io expander   Potin Lai
• [PATCH v2 07/10] arch: arm: dts: bletchley: add shunt-resistor for ADM1278   Potin Lai
• [PATCH v2 08/10] arch: arm: dts: bletchley: add INA230 sensor on each sled   Potin Lai
• [PATCH v2 09/10] arch: arm: dts: bletchley: enable mdio3 bus   Potin Lai
• [PATCH v2 10/10] arch: arm: dts: bletchley: cleanup redundant nodes   Potin Lai
• [PATCH] media: aspeed: Use of_device_get_match_data() helper   Joel Stanley
• [PATCH] media: aspeed: Use of_device_get_match_data() helper   Jammy Huang
• [PATCH v2] media: aspeed: Use of_device_get_match_data() helper   Jammy Huang
• [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type   Andy Shevchenko
• [PATCH 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Cédric Le Goater
• [PATCH 01/10] mtd: spi-nor: aspeed: Rename Kconfig option   Cédric Le Goater
• [PATCH 02/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Cédric Le Goater
• [PATCH 03/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Cédric Le Goater
• [PATCH 04/10] spi: aspeed: Add support for direct mapping   Cédric Le Goater
• [PATCH 05/10] spi: aspeed: Adjust direct mapping to device size   Cédric Le Goater
• [PATCH 06/10] spi: aspeed: Workaround AST2500 limitations   Cédric Le Goater
• [PATCH 07/10] spi: aspeed: Add support for the AST2400 SPI controller   Cédric Le Goater
• [PATCH 08/10] spi: aspeed: Calibrate read timings   Cédric Le Goater
• [PATCH 09/10] ARM: dts: aspeed: Enable Dual SPI RX transfers   Cédric Le Goater
• [PATCH 10/10] spi: aspeed: Activate new spi-mem driver   Cédric Le Goater
• [PATCH v2 00/10] update Facebook Bletchley BMC   Patrick Williams
• [PATCH v2 05/10] arch: arm: dts: bletchley: switch to spi-gpio for spi2   Joel Stanley
• [PATCH v2 00/10] update Facebook Bletchley BMC   Joel Stanley
• [PATCH 03/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Lukas Wunner
• [PATCH 03/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Cédric Le Goater
• [PATCH AUTOSEL 5.16 23/34] soc: aspeed: lpc-ctrl: Block error printing on probe defer cases   Sasha Levin
• [PATCH AUTOSEL 5.15 23/33] soc: aspeed: lpc-ctrl: Block error printing on probe defer cases   Sasha Levin
• [PATCH AUTOSEL 5.10 16/23] soc: aspeed: lpc-ctrl: Block error printing on probe defer cases   Sasha Levin
• [PATCH v3 00/10] update Facebook Bletchley BMC   Potin Lai
• [PATCH v3 01/10] ARM: dts: aspeed: bletchley: switch sled numbering to 1-based   Potin Lai
• [PATCH v3 02/10] ARM: dts: aspeed: bletchley: separate leds into multiple groups   Potin Lai
• [PATCH v3 03/10] ARM: dts: aspeed: bletchley: update gpio-line-names   Potin Lai
• [PATCH v3 04/10] ARM: dts: aspeed: bletchley: update fmc configurations   Potin Lai
• [PATCH v3 05/10] ARM: dts: aspeed: bletchley: switch to spi-gpio for spi2   Potin Lai
• [PATCH v3 06/10] ARM: dts: aspeed: bletchley: add interrupt support for sled io expander   Potin Lai
• [PATCH v3 07/10] ARM: dts: aspeed: bletchley: add shunt-resistor for ADM1278   Potin Lai
• [PATCH v3 08/10] ARM: dts: aspeed: bletchley: add INA230 sensor on each sled   Potin Lai
• [PATCH v3 09/10] ARM: dts: aspeed: bletchley: enable mdio3 bus   Potin Lai
• [PATCH v3 10/10] ARM: dts: aspeed: bletchley: cleanup redundant nodes   Potin Lai
• [PATCH 02/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Rob Herring
• [PATCH 02/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Rob Herring
• [PATCH v3 00/10] update Facebook Bletchley BMC   Joel Stanley
• [PATCH 10/10] spi: aspeed: Activate new spi-mem driver   Joel Stanley
• [PATCH 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Joel Stanley
• [PATCH 09/10] ARM: dts: aspeed: Enable Dual SPI RX transfers   Joel Stanley
• [PATCH 10/10] spi: aspeed: Activate new spi-mem driver   Cédric Le Goater
• [PATCH v3 00/10] update Facebook Bletchley BMC   Patrick Williams
• [PATCH 02/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Cédric Le Goater
• [PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.   Billy Tsai
• [PATCH] dt-bindings: soc: aspeed XDMA fixes   Cédric Le Goater
• [PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.   Jonathan Cameron
• [PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.   Billy Tsai
• [PATCH v2] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.   Billy Tsai
• [PATCH v2] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.   Joel Stanley
• [PATCH 0/2] leds: pca955x: Expose GPIOs for all pins   Joel Stanley
• [GIT PULL] ARM: aspeed: devicetree changes for 5.18   Joel Stanley
• [PATCH] fsi: Add trace events in initialization path   Joel Stanley
• [PATCH v3] fsi: Aspeed: Fix a potential double free   Joel Stanley
• [PATCH v3] fsi: Aspeed: Fix a potential double free   Christophe JAILLET
• [PATCH 01/10] mtd: spi-nor: aspeed: Rename Kconfig option   Pratyush Yadav
• [PATCH 03/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Pratyush Yadav
• [PATCH 04/10] spi: aspeed: Add support for direct mapping   Pratyush Yadav
• [PATCH 08/10] spi: aspeed: Calibrate read timings   Pratyush Yadav
• [GIT PULL] ARM: aspeed: devicetree changes for 5.18   Arnd Bergmann
• [PATCH v2] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.   Jonathan Cameron
• [PATCH 03/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Cédric Le Goater
• [PATCH 01/10] mtd: spi-nor: aspeed: Rename Kconfig option   Cédric Le Goater
• [PATCH 04/10] spi: aspeed: Add support for direct mapping   Cédric Le Goater
• [PATCH 08/10] spi: aspeed: Calibrate read timings   Cédric Le Goater
• [PATCH v1 0/5] Enable second flash, update gpios pin and merge adc channels   Quan Nguyen
• [PATCH v1 1/5] ARM: dts: aspeed: mtjade: Enable secondary flash   Quan Nguyen
• [PATCH v1 2/5] ARM: dts: aspeed: mtjade: Update rtc-battery-voltage-read-enable pin   Quan Nguyen
• [PATCH v1 3/5] ARM: dts: aspeed: mtjade: Update host0-ready pin   Quan Nguyen
• [PATCH v1 4/5] ARM: dts: aspeed: mtjade: Rename GPIO hog nodes to match schema.   Quan Nguyen
• [PATCH v1 5/5] ARM: dts: aspeed: mtjade: Move all adc sensors into iio-hwmon node   Quan Nguyen
• [PATCH v1 0/5] Enable second flash, update gpios pin and merge adc channels   Joel Stanley
• [PATCH] ARM: dts: aspeed: Adding Wistron Lannister BMC   Joel Stanley
• [PATCH] ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC   Joel Stanley
• [GIT PULL] ARM: aspeed: devicetree changes for 5.18   Joel Stanley
• [GIT PULL v2] ARM: aspeed: devicetree changes for 5.18   Joel Stanley
• [PATCH 01/10] mtd: spi-nor: aspeed: Rename Kconfig option   Joel Stanley
• [PATCH v5 4/7] drm/aspeed: Add AST2600 chip support   Joel Stanley
• [PATCH v5 5/7] drm/aspeed: Add reset and clock for AST2600   Joel Stanley
• [PATCH v5 0/7] Add Aspeed AST2600 soc display support   Joel Stanley
• [PATCH 0/6] Remove usage of list iterator past the loop body   Jakob Koschel
• [PATCH 1/6] drivers: usb: remove usage of list iterator past the loop body   Jakob Koschel
• [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr   Jakob Koschel
• [PATCH 3/6] treewide: fix incorrect use to determine if list is empty   Jakob Koschel
• [PATCH 4/6] drivers: remove unnecessary use of list iterator variable   Jakob Koschel
• [PATCH 5/6] treewide: remove dereference of list iterator after loop body   Jakob Koschel
• [PATCH 6/6] treewide: remove check of list iterator against head past the loop body   Jakob Koschel
• [PATCH v1 0/5] Enable second flash, update gpios pin and merge adc channels   Quan Nguyen
• [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr   Greg KH
• [PATCH 6/6] treewide: remove check of list iterator against head past the loop body   Dominique Martinet
• [PATCH 1/6] drivers: usb: remove usage of list iterator past the loop body   Dan Carpenter
• [PATCH 3/6] treewide: fix incorrect use to determine if list is empty   Dan Carpenter
• [PATCH 1/6] drivers: usb: remove usage of list iterator past the loop body   Jakob Koschel
• [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr   Jakob Koschel
• [PATCH 2/6] treewide: remove using list iterator after loop body as a ptr   Christian König

Last message date: Mon Feb 28 23:19:17 AEDT 2022
Archived on: Tue Mar 1 10:06:12 AEDT 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...