[PATCH] ARM: dts: aspeed: Adding Wistron Lannister BMC
Joel Stanley
joel at jms.id.au
Mon Feb 28 15:41:40 AEDT 2022
Hello Bob,
On Mon, 24 Jan 2022 at 08:07, Bob King <Bob_King at wistron.com> wrote:
>
> Initial introduction of Wistron Lannister equipped with
> Aspeed 2600 BMC SoC.
I missed this one.
Can you get a colleague to review it also?
>
> Signed-off-by: Bob King <Bob_King at wistron.com>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/aspeed-bmc-wistron-lannister.dts | 1007 ++++++++++++++++++++
> 2 files changed, 1009 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-wistron-lannister.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 235ad55..7d37aab 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1548,4 +1548,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-tyan-s8036.dtb \
> aspeed-bmc-vegman-n110.dtb \
> aspeed-bmc-vegman-rx20.dtb \
> - aspeed-bmc-vegman-sx20.dtb
> + aspeed-bmc-vegman-sx20.dtb \
> + aspeed-bmc-wistron-lannister.dtb
> diff --git a/arch/arm/boot/dts/aspeed-bmc-wistron-lannister.dts b/arch/arm/boot/dts/aspeed-bmc-wistron-lannister.dts
> new file mode 100644
> index 0000000..e8e4f9d
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-wistron-lannister.dts
> @@ -0,0 +1,1007 @@
> +// SPDX-License-Identifier: GPL-2.0+
Should have a copyright line.
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> + model = "Lannister BMC";
> + compatible = "aspeed,ast2600";
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200n8 root=/dev/ram rw init=/linuxrc";
This looks like it's taken from the ASPEED SDK. Do you really use this
command line?
> + };
> +
> + memory at 80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x40000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_engine_memory: jpegbuffer {
> + size = <0x02000000>; /* 32M */
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + video_memory: video {
> + size = <0x04000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + no-map;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + identify {
> + default-state = "off";
> + gpios = <&gpio0 ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + status_amber {
> + default-state = "off";
> + gpios = <&gpio0 ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
> + };
> +
> + status_green {
> + default-state = "keep";
> + gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + bmc-heart-beat {
> + default-state = "off";
> + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + power-ok {
> + default-state = "keep";
> + gpios = <&gpio0 ASPEED_GPIO(R, 6) GPIO_ACTIVE_LOW>;
> + };
> +
> + global-error {
> + default-state = "off";
> + gpios = <&gpio0 ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err1 {
> + default-state = "off";
> + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err2 {
> + default-state = "off";
> + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err3 {
> + default-state = "off";
> + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err4 {
> + default-state = "off";
> + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err5 {
> + default-state = "off";
> + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err6 {
> + default-state = "off";
> + gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err7 {
> + default-state = "off";
> + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err8 {
> + default-state = "off";
> + gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err9 {
> + default-state = "off";
> + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err10 {
> + default-state = "off";
> + gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err11 {
> + default-state = "off";
> + gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err12 {
> + default-state = "off";
> + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err13 {
> + default-state = "off";
> + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err14 {
> + default-state = "off";
> + gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err15 {
> + default-state = "off";
> + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err16 {
> + default-state = "off";
> + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err17 {
> + default-state = "off";
> + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err18 {
> + default-state = "off";
> + gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err19 {
> + default-state = "off";
> + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err20 {
> + default-state = "off";
> + gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err21 {
> + default-state = "off";
> + gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err22 {
> + default-state = "off";
> + gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err23 {
> + default-state = "off";
> + gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err24 {
> + default-state = "off";
> + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err25 {
> + default-state = "off";
> + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err26 {
> + default-state = "off";
> + gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err27 {
> + default-state = "off";
> + gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err28 {
> + default-state = "off";
> + gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err29 {
> + default-state = "off";
> + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err30 {
> + default-state = "off";
> + gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err31 {
> + default-state = "off";
> + gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
> + };
> +
> + dimm-err32 {
> + default-state = "off";
> + gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan1-fault {
> + default-state = "off";
> + gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan2-fault {
> + default-state = "off";
> + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan3-fault {
> + default-state = "off";
> + gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan4-fault {
> + default-state = "off";
> + gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan5-fault {
> + default-state = "off";
> + gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan6-fault {
> + default-state = "off";
> + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + cpu1 {
> + default-state = "off";
> + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
> + };
> +
> + cpu2 {
> + default-state = "off";
> + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + riser1-s1 {
> + default-state = "off";
> + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + riser1-s2 {
> + default-state = "off";
> + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + riser1-s3 {
> + default-state = "off";
> + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + riser2-s1 {
> + default-state = "off";
> + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + riser2-s2 {
> + default-state = "off";
> + gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + riser2-s3 {
> + default-state = "off";
> + gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + riser3-s1 {
> + default-state = "off";
> + gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + riser3-s2 {
> + default-state = "off";
> + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
> + };
> +
> + m2-1 {
> + default-state = "off";
> + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
> + };
> +
> + m2-2 {
> + default-state = "off";
> + gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + bat {
> + default-state = "off";
> + gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <1000>;
> +
> + fan0-presence {
> + /* GPIO18C2 */
> + label = "fan0-presence";
> + gpios = <&gpio1 ASPEED_GPIO(C, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(C, 2)>;
> + };
> +
> + fan1-presence {
> + /* GPIO18C3 */
> + label = "fan1-presence";
> + gpios = <&gpio1 ASPEED_GPIO(C, 3) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(C, 3)>;
> + };
> +
> + fan2-presence {
> + /* GPIO18C7 */
> + label = "fan2-presence";
> + gpios = <&gpio1 ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(C, 7)>;
> + };
> +
> + fan3-presence {
> + /* GPIO18C6 */
> + label = "fan3-presence";
> + gpios = <&gpio1 ASPEED_GPIO(C, 6) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(C, 6)>;
> + };
> +
> + fan4-presence {
> + /* GPIO18C5 */
> + label = "fan4-presence";
> + gpios = <&gpio1 ASPEED_GPIO(C, 5) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(C, 5)>;
> + };
> +
> + fan5-presence {
> + /* GPIO18C4 */
> + label = "fan5-presence";
> + gpios = <&gpio1 ASPEED_GPIO(C, 4) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(C, 4)>;
> + };
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash at 0 {
> + status = "okay";
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <4>;
> + m25p,fast-read;
> +#include "openbmc-flash-layout-64.dtsi"
> + };
> +};
> +&syscon {
> + uart-clock-high-speed;
> + status = "okay";
> +
> + misc_control {
> + compatible = "aspeed,bmc-misc";
> + chip_id {
> + offset = <0x5b0>;
> + bit-mask = <0xffffffff 0xffffffff>;
> + bit-shift = <0>;
> + read-only;
> + reg-width = <64>;
> + hash-data = "d44f9b804976fa23c2e25d62f16154d26520a7e24c5555095fd1b55c027804f1570dcd16189739c640cd7d9a6ce14944a2c4eaf1dc429eed6940e8a83498a474";
> + };
This doesn't look like anything we have bindings or code for.
> + };
> +};
> +
> +#if 0
> + GPIO Alias: (runtime alias -> schematic name)
> + ID_BUTTON -> FP_ID_BTN_N
> + CPU_CATERR -> FM_PLT_BMC_THERMTRIP_N
> + PCH_BMC_THERMTRIP -> FM_PLT_BMC_THERMTRIP_N
> + RESET_BUTTON -> FP_BMC_RST_BTN_N
> + RESET_OUT -> RST_BMC_RSTBTN_OUT_R_N
> + POWER_BUTTON -> FP_BMC_PWR_BTN_R_N
> + POWER_OUT -> FM_BMC_PWR_BTN_N
> + PREQ_N -> DBP_ASD_BMC_PREQ_R_N
> + POST_COMPLETE -> FM_BIOS_POST_CMPLT_BMC_N
> + CPU_ERR0 -> FM_CPU_ERR0_LVT3_N
> + CPU_ERR1 -> FM_CPU_ERR1_LVT3_N
> + CPU_ERR2 -> FM_CPU_ERR2_LVT3_N
> + DEBUG_EN_N -> FM_JTAG_TCK_MUX_SEL_R
> + NMI_OUT -> IRQ_BMC_CPU_NMI_R
> + PLTRST_N -> RST_PLTRST_BMC_N
> + PRDY_N -> DBP_ASD_BMC_PRDY_R_N
> + PWR_DEBUG_N ->
> + XDP_PRST_N ->
> + SYSPWROK ->
> + RSMRST_N ->
> + SIO_S3 -> FM_SLPS3_R_N
> + SIO_S5 -> FM_SLPS4_R_N
> + SIO_ONCONTROL -> FM_BMC_ONCTL_R_N
> + SIO_POWER_GOOD -> PWRGD_CPU0_LVC3_R
> + PS_PWROK -> PWRGD_BMC_PS_PWROK_R
> + P3VBAT_BRIDGE_EN ->
> + TCK_MUX_SEL ->
> + SMI -> IRQ_SMI_ACTIVE_BMC_N
> + NMI_BUTTON -> FP_NMI_BTN_N
> +#endif
Put this in a comment instead of an ifdef, if you want it included in
the device tree.
> +
> +&gpio0 {
> + status = "okay";
> + /* pinctrl-names = "pass-through";
> + pinctrl-0 = <&pinctrl_thru0_default
> + &pinctrl_thru1_default>; */
Either remove this or un-comment it.
> + gpio-line-names =
> + /*A0-A7*/ "SMB_BMC0_MUX01_CLK_H","SMB_BMC0_MUX01_DAT_H","RST_BTN_IRMC_N","BTN_PWR_BMC_N","SMB_CPU_PIROM_SCL","SMB_CPU_PIROM_SDA","I2C_BMC_SCL14","I2C_BMC_SDA14",
> + /*B0-B7*/ "FM_SEL_BMC_USB_HOST_N","NMI_OUT","IRQ_SMB3_M2_ALERT_N","SMB_BMC_2_PMBUS_ALERT_N","RST_BMC_PCIE_MUX_N","FM_BMC_EUP_LOT6_N","FM_BMC_BMCINIT_R","FP_ID_LED_N",
> + /*C0-C7*/ "FM_FORCE_BMC_UPDATE_N","RST_RGMII_PHYRST_N","FM_TPM_EN_PULSE","FM_BMC_CRASHLOG_TRIG_N","IRQ_BMC_PCH_NMI_R","FM_CPU1_DISABLE_COD_N","SMB_BMCLC1_CLK_R_H","SMB_BMCLC1_DAT_R_H",
> + /*D0-D7*/ "CPU_ERR0","CPU_ERR1","CPU_ERR2","PRDY_N","FM_SPD_SWITCH_CTRL_N","FM_RISER3_BMC_ID_0","FAN_PRSNT_LC2","FAN_PRSNT_LC1",
> + /*E0-E7*/ "FM_RISER2_RBP_ID_R_0","LED_CSS_R_N","CLK_50M_CKMNG_BMCB","FM_BMC_BOARD_REV_ID2_N","FM_RISER2_ID_0","FM_RISER2_ID_1","SMB_BMCLC2_DAT_R_H","SMB_BMCLC2_CLK_R_H",
> + /*F0-F7*/ "FM_BMC_BOARD_SKU_ID0_N","FM_BMC_BOARD_SKU_ID1_N","FM_BMC_BOARD_SKU_ID2_N","FM_BMC_BOARD_SKU_ID3_N","FM_BMC_BOARD_SKU_ID4_N ","FM_BMC_BOARD_SKU_ID5_N","PRSNT_MONITOR_FP_L","PS_PWROK",
> + /*G0-G7*/ "FM_SMB_BMC_NVME_LVC3_ALERT_N","RST_BMC_I2C_M2_R_N","FP_LED_STATUS_GREEN_N","FP_LED_STATUS_AMBER_N","FM_BMC_BOARD_REV_ID0_N","FM_BMC_BOARD_REV_ID1_N","FM_BMC_CPU_FBRK_OUT_R_N","DBP_PRESENT_IN_R2_N",
> + /*H0-H7*/ "SGPIO_BMC_CLK_R","SGPIO_BMC_LD_R_N","SGPIO_BMC_DOUT_R","SGPIO_BMC_DIN","PLTRST_N","CPU_CATERR","SMB_TEMPSENSOR_STBY_LVC3_R_SCL","SMB_TEMPSENSOR_STBY_LVC3_R_SDA",
> + /*I0-I7*/ "JTAG_ASD_NTRST_R_N","JTAG_ASD_TDI_R","JTAG_ASD_TCK_R","JTAG_ASD_TMS_R","JTAG_ASD_TDO","FM_BMC_PWRBTN_OUT_R_N","","TP_FM_BMC_PCH_SCI_LPC_R_N",
> + /*J0-J7*/ "I2C_BMC_RISER1_SCL1","I2C_BMC_RISER1_SDA1","I2C_BMC_PSU_SCL2","I2C_BMC_PSU_SDA2","I2C_BMC_PWR_SCL3","I2C_BMC_PWR_SDA3","I2C_BMC_SCL4","I2C_BMC_SDA4",
> + /*K0-K7*/ "SMB_HSBP_STBY_LVC3_R_SCL","SMB_HSBP_STBY_LVC3_R_SDA","SMB_SMLINK0_STBY_LVC3_R2_SCL","SMB_SMLINK0_STBY_LVC3_R2_SDA","I2C_BMC_RISER2_SCL7","I2C_BMC_RISER2_SDA7","SMB_PMBUS_SML1_STBY_LVC3_R_SCL","SMB_PMBUS_SML1_STBY_LVC3_R_SDA",
> + /*L0-L7*/ "SMB_PCIE_STBY_LVC3_R_SCL","SMB_PCIE_STBY_LVC3_R_SDA","SMB_HOST_STBY_BMC_LVC3_R_SCL","SMB_HOST_STBY_BMC_LVC3_R_SDA","PREQ_N","TCK_MUX_SEL","V_BMC_GFX_HSYNC_R","V_BMC_GFX_VSYNC_R",
> + /*M0-M7*/ "SPA_CTS_N ","SPA_DCD_N","SPA_DSR_N","PU_SPA_RI_N","SPA_DTR_N","SPA_RTS_N","SPA_SOUT","SPA_SIN",
> + /*N0-N7*/ "SPB_CTS_N","SPB_DCD_N","SPB_DSR_N","PU_SPB_RI_N","SPB_DTR_N","SPB_RTS_N","SPB_SOUT","SPB_SIN",
> + /*O0-O7*/ "FAN_PWM_BMC_1_H","FAN_PWM_BMC_2_H","FAN_PWM_BMC_3_H","FAN_PWM_BMC_4_H","FAN_PWM_BMC_5_H","FAN_PWM_BMC_6_H","NMI_BUTTON","FM_RECOVER_BIOS_R_N",
> + /*P0-P7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","FM_RISER3_BMC_ID_1","FM_RISER2_BMC_ID_2","RST_BMC_I2C_R_8","LED_BMC_HEARTBEAT_R_N",
> + /*Q0-Q7*/ "FAN_TACH_BMC_0_N_BUF","FAN_TACH_BMC_1_N_BUF","FAN_TACH_BMC_2_N_BUF","FAN_TACH_BMC_3_N_BUF","FAN_TACH_BMC_4_N_BUF","FAN_TACH_BMC_5_N_BUF","FAN_TACH_BMC_6_N_BUF","FAN_TACH_BMC_7_N_BUF",
> + /*R0-R7*/ "FAN_TACH_BMC_8_N_BUF","FAN_TACH_BMC_9_N_BUF","FAN_TACH_BMC_10_N_BUF","FAN_TACH_BMC_11_N_BUF","FAN_TACH_BMC_LC1_N_BUF","FAN_TACH_BMC_LC2_N_BUF","LED_PWROK_BMC_N","LED_GERR_IRMC_N",
> + /*S0-S7*/ "RGMII_BMC_RMM4_LVC3_R_MDC","RGMII_BMC_RMM4_LVC3_R_MDIO","ID_BUTTON","PCH_BMC_THERMTRIP","TP_LED_BMC_HEARTBEAT_N","A_P3V_BAT_SCALED_EN","FM_ASD_EN_DET_R","FM_PCHHOT_N",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "SIO_S3","SIO_S5","TP_BMC_SIO_PWREQ_N","SIO_ONCONTROL","SIO_POWER_GOOD","LED_BMC_HB_LED_N","FM_BMC_SUSACK_N","TP_IRQ_BMC_PCH_SMI_LPC_N_R",
> + /*W0-W7*/ "LPC_LAD0_ESPI_R_IO0","LPC_LAD1_ESPI_R_IO1","LPC_LAD2_ESPI_R_IO2","LPC_LAD3_ESPI_R_IO3","CLK_24M_66M_LPC0_ESPI_BMC","LFRAME_N_ESPI_CS0_BMC_N","IRQ_LPC_SERIRQ_ESPI_ALERT_N","RST_LPC_LRST_ESPI_RST_BMC_R_N",
> + /*X0-X7*/ "ERR_FAT_VRM_N","SMI","POST_COMPLETE","FM_CLR_LDL_H","PU_SPB_FORCEOFF_N","PU_SPA_FORCEOFF_N","FM_RISER1_RBP_ID_0","FM_OCP1_PRSNTB3_N",
> + /*Y0-Y7*/ "FM_M2_PRSTN_BMC_N","IRQ_SML0_ALERT_BMC_R2_N","I2C_BUS8_INT_N","IRQ_SML1_PMBUS_BMC_ALERT_N","SPI_BMC_BOOT_R_IO2","SPI_BMC_BOOT_R_IO3","PU_SPI_BMC_BOOT_ABR","PU_SPI_BMC_BOOT_WP_N",
> + /*Z0-Z7*/ "PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PRSNT_USB3_FP_X_L","PU_GPIOZ3","PU_GPIOZ4","PU_GPIOZ5","PU_GPIOZ6","PU_GPIOZ7";
> +};
> +
> +&gpio1 {
> + status = "disabled";
> + gpio-line-names = /* GPIO18 A-E */
> + /*A0-A7*/ "RGMII_BMC_RMM4_TX_R_CLK","RGMII_BMC_RMM4_TX_R_CTRL","RGMII_BMC_RMM4_R_TXD0","RGMII_BMC_RMM4_R_TXD1","RGMII_BMC_RMM4_R_TXD2","RGMII_BMC_RMM4_R_TXD3","RGMII_BMC_RMM4_RX_CLK","RGMII_BMC_RMM4_RX_CTRL",
> + /*B0-B7*/ "RGMII_BMC_RMM4_RXD0","RGMII_BMC_RMM4_RXD1","RGMII_BMC_RMM4_RXD2","RGMII_BMC_RMM4_RXD3","FAN_PWM_BMC_LC2_H","FAN_PWM_BMC_LC1_H ","RST_EMMC_BMC_R_N","FM_RISER1_BMC_ID_2",
> + /*C0-C7*/ "FM_RISER1_BMC_ID_1","FM_RISER1_BMC_ID_0","FAN_PRSNT1_N","FAN_PRSNT2_N","FAN_PRSNT6_N","FAN_PRSNT5_N","FAN_PRSNT4_N","FAN_PRSNT3_N",
> + /*D0-D7*/ "EMMC_BMC_R_CLK","EMMC_BMC_R_CMD","EMMC_BMC_R_DATA0","EMMC_BMC_R_DATA1","EMMC_BMC_R_DATA2","EMMC_BMC_R_DATA3","EMMC_BMC_CD_N","EMMC_BMC_WP_N",
> + /*E0-E3*/ "EMMC_BMC_R_DATA4","EMMC_BMC_R_DATA5","EMMC_BMC_R_DATA6","EMMC_BMC_R_DATA7";
> +};
> +
> +&sgpiom0 {
> + status = "okay";
> +};
> +
> +&kcs3 {
> + kcs_addr = <0xCA2>;
> + status = "okay";
> +};
> +
> +&kcs4 {
> + kcs_addr = <0xCA4>;
> + status = "okay";
> +};
> +
> +&lpc_snoop {
> + snoop-ports = <0x80>;
> + status = "okay";
> +};
> +
> +&mdio0 {
> + status = "okay";
> +
> + ethphy1: ethernet-phy at 0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> +};
> +
> +&mac0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default>;
> + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
> + <&syscon ASPEED_CLK_MAC1RCLK>;
> + clock-names = "MACCLK", "RCLK";
> + phy-mode = "rgmii";
> + phy-handle = <ðphy1>;
> +};
> +
> +&adc0 {
> + status = "okay";
> +};
> +
> +&adc1 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default
> + &pinctrl_nrts1_default
> + &pinctrl_ndtr1_default
> + &pinctrl_ndsr1_default
> + &pinctrl_ncts1_default
> + &pinctrl_ndcd1_default
> + &pinctrl_nri1_default>;
> +};
> +
> +&uart2 {
> + status = "okay";
> + pinctrl-0 = <&pinctrl_txd2_default
> + &pinctrl_rxd2_default
> + &pinctrl_nrts2_default
> + &pinctrl_ndtr2_default
> + &pinctrl_ndsr2_default
> + &pinctrl_ncts2_default
> + &pinctrl_ndcd2_default
> + &pinctrl_nri2_default>;
> +};
> +
> +&uart3 {
> + status = "okay";
> + pinctrl-0 = <>;
> +};
> +
> +&uart4 {
> + status = "okay";
> + pinctrl-0 = <>;
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&uart_routing {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + /* I2C_BMC_RISER1 */
> + multi-master;
> + status = "okay";
> +
> + pca9545 at 70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + };
> +};
> +
> +&i2c1 {
> + /* I2C_BMC_PSU */
> + multi-master;
> + status = "okay";
> +
> + psu1-eeprom at 50 {
> + compatible = "atmel,24c02";
> + reg = <0x50>;
> + };
> +
> + psu2-eeprom at 51 {
> + compatible = "atmel,24c02";
> + reg = <0x51>;
> + };
> +
> + pmbus at 58 {
> + compatible = "pmbus,sgd009";
> + reg = <0x58>;
> + };
> +
> + pmbus at 59 {
> + compatible = "pmbus,sgd009";
> + reg = <0x59>;
> + };
> +};
> +
> +&i2c2 {
> + /* I2C_BMC_PWR */
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + multi-master;
> + status = "okay";
> +
> + gpio2: pca9539 at 74{
> + compatible = "nxp,pca9539";
> + reg = <0x74>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio at 0 {
> + reg = <0>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + };
We have a patch pending that exposes all of the pins as GPIOs, so you
don't need all of these nodes.
That said, the patch hasn't been merged upstream yet, so if you want
to keep these that's ok.
> + };
> +
> + gpio3: pca9539 at 75{
> + compatible = "nxp,pca9539";
> + reg = <0x75>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio at 0 {
> + reg = <0>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + };
> + };
> +
> + gpio4: pca9539 at 76{
> + compatible = "nxp,pca9539";
> + reg = <0x76>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio at 0 {
> + reg = <0>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + };
> + };
> +
> + gpio5: pca9539 at 77{
> + compatible = "nxp,pca9539";
> + reg = <0x77>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio at 0 {
> + reg = <0>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + };
> + };
> +};
> +
> +&i2c4 {
> + /* SMB_HSBP_STBY_LVC3_R */
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c5 {
> + /* SMB_SMLINK0_STBY_LVC3_R2 */
> + bus-frequency = <1000000>;
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c6 {
> + /* I2C_BMC_RISER2 */
> + multi-master;
> + status = "okay";
> +
> + pca9543 at 70 {
> + compatible = "nxp,pca9543";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + };
> +
> + pca9545 at 72 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x72>;
> + };
> +};
> +
> +&i2c7 {
> + /* SMB_PMBUS_SML1_STBY_LVC3_R */
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c8 {
> + /* SMB_PCIE_STBY_LVC3_R */
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c9 {
> + /* SMB_HOST_STBY_BMC_LVC3_R */
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c10 {
> + /* SMB_BMC0_MUX01 */
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c12 {
> + /* SMB_CPU_PIROM */
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c13 {
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c15 {
> + /* SMB_TEMPSENSOR_STBY_LVC3_R */
> + multi-master;
> + status = "okay";
> +
> + tmp75 at 48 {
> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> --
> 2.7.4
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
> This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
>
More information about the Linux-aspeed
mailing list