[PATCH V4 1/5] arm/dt: add basic mx51 device tree support
Jason Liu
jason.hui at linaro.org
Thu Mar 10 15:59:41 EST 2011
Signed-off-by: Jason Liu <jason.hui at linaro.org>
Signed-off-by: Jason Liu <r64343 at freescale.com>
---
arch/arm/mach-mx5/Kconfig | 8 ++++
arch/arm/mach-mx5/Makefile | 1 +
arch/arm/mach-mx5/board-dt.c | 65 +++++++++++++++++++++++++++++++
arch/arm/mach-mx5/clock-mx51-mx53.c | 43 ++++++++++++++++++++-
arch/arm/plat-mxc/include/mach/common.h | 1 +
5 files changed, 117 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index de4fa99..6438f87 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -47,6 +47,14 @@ config MACH_MX51_BABBAGE
u-boot. This includes specific configurations for the board and its
peripherals.
+config MACH_MX51_DT
+ bool "Generic MX51 board (FDT support)"
+ select USE_OF
+ select SOC_IMX51
+ help
+ Support for generic Freescale i.MX51 boards using Flattened Device
+ Tree.
+
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
select SOC_IMX51
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 0d43be9..540697e 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
+obj-$(CONFIG_MACH_MX51_DT) += board-dt.o
diff --git a/arch/arm/mach-mx5/board-dt.c b/arch/arm/mach-mx5/board-dt.c
new file mode 100644
index 0000000..19c60a4
--- /dev/null
+++ b/arch/arm/mach-mx5/board-dt.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2011 Linaro Ltd.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+static struct of_device_id mx51_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ {}
+};
+
+static void __init mx51_dt_board_init(void)
+{
+ of_platform_bus_probe(NULL, mx51_dt_match_table, NULL);
+}
+
+static void __init mx51_dt_timer_init(void)
+{
+ mx51_clocks_init(32768, 24000000, 22579200, 0);
+ mx5_clk_dt_init();
+}
+
+static struct sys_timer mxc_timer = {
+ .init = mx51_dt_timer_init,
+};
+
+static const char *mx51_dt_board_compat[] = {
+ "fsl,mx51-babbage",
+ NULL
+};
+
+DT_MACHINE_START(MX51_DT, "Freescale MX51 (Flattened Device Tree)")
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx51_map_io,
+ .init_irq = mx51_init_irq,
+ .init_machine = mx51_dt_board_init,
+ .dt_compat = mx51_dt_board_compat,
+ .timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 0a19e75..dedb7f9 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -15,13 +15,19 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
-
+#include <linux/err.h>
#include <asm/div64.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/clock.h>
+#ifdef CONFIG_OF
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_clk.h>
+#endif /* CONFIG_OF */
+
#include "crm_regs.h"
/* External clock values passed-in by the board code */
@@ -1432,3 +1438,38 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
MX53_INT_GPT);
return 0;
}
+
+#ifdef CONFIG_OF
+static struct clk *mx5_dt_clk_get(struct device_node *np,
+ const char *output_id, void *data)
+{
+ return data;
+}
+
+static __init void mx5_dt_scan_clks(void)
+{
+ struct device_node *node;
+ struct clk *clk;
+ const char *id;
+ int rc;
+
+ for_each_compatible_node(node, NULL, "clock") {
+ id = of_get_property(node, "clock-outputs", NULL);
+ if (!id)
+ continue;
+
+ clk = clk_get_sys(id, NULL);
+ if (IS_ERR(clk))
+ continue;
+
+ rc = of_clk_add_provider(node, mx5_dt_clk_get, clk);
+ if (rc)
+ pr_err("error adding fixed clk %s\n", node->name);
+ }
+}
+
+void __init mx5_clk_dt_init(void)
+{
+ mx5_dt_scan_clks();
+}
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index aea2cd3..a28e84a 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -58,4 +58,5 @@ extern void mxc91231_arch_reset(int, const char *);
extern void mxc91231_prepare_idle(void);
extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
+extern void mx5_clk_dt_init(void);
#endif
--
1.7.1
More information about the devicetree-discuss
mailing list