[PATCH V4 1/5] arm/dt: add basic mx51 device tree support

Grant Likely grant.likely at secretlab.ca
Tue Mar 15 18:03:42 EST 2011


Hi Jason,

Minor comments below.

On Thu, Mar 10, 2011 at 12:59:41PM +0800, Jason Liu wrote:
> Signed-off-by: Jason Liu <jason.hui at linaro.org>
> Signed-off-by: Jason Liu <r64343 at freescale.com>

This looks wrong.  You should only have one s-o-b line.  Use one email
addr or the other.  Not both.

> ---
>  arch/arm/mach-mx5/Kconfig               |    8 ++++
>  arch/arm/mach-mx5/Makefile              |    1 +
>  arch/arm/mach-mx5/board-dt.c            |   65 +++++++++++++++++++++++++++++++
>  arch/arm/mach-mx5/clock-mx51-mx53.c     |   43 ++++++++++++++++++++-
>  arch/arm/plat-mxc/include/mach/common.h |    1 +
>  5 files changed, 117 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
> index de4fa99..6438f87 100644
> --- a/arch/arm/mach-mx5/Kconfig
> +++ b/arch/arm/mach-mx5/Kconfig
> @@ -47,6 +47,14 @@ config MACH_MX51_BABBAGE
>  	  u-boot. This includes specific configurations for the board and its
>  	  peripherals.
>  
> +config MACH_MX51_DT
> +	bool "Generic MX51 board (FDT support)"
> +	select USE_OF
> +	select SOC_IMX51
> +	help
> +	 Support for generic Freescale i.MX51 boards using Flattened Device
> +	 Tree.
> +
>  config MACH_MX51_3DS
>  	bool "Support MX51PDK (3DS)"
>  	select SOC_IMX51
> diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
> index 0d43be9..540697e 100644
> --- a/arch/arm/mach-mx5/Makefile
> +++ b/arch/arm/mach-mx5/Makefile
> @@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
>  obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
>  obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
>  obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
> +obj-$(CONFIG_MACH_MX51_DT) += board-dt.o
> diff --git a/arch/arm/mach-mx5/board-dt.c b/arch/arm/mach-mx5/board-dt.c
> new file mode 100644
> index 0000000..19c60a4
> --- /dev/null
> +++ b/arch/arm/mach-mx5/board-dt.c
> @@ -0,0 +1,65 @@
> +/*
> + * Copyright 2011 Linaro Ltd.
> + * Copyright 2011 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_fdt.h>
> +
> +#include <mach/common.h>
> +#include <mach/hardware.h>
> +#include <mach/imx-uart.h>
> +#include <mach/iomux-mx51.h>
> +
> +#include <asm/irq.h>
> +#include <asm/setup.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +
> +#include "devices.h"
> +
> +static struct of_device_id mx51_dt_match_table[] __initdata = {
> +	{ .compatible = "simple-bus", },
> +	{}
> +};
> +
> +static void __init mx51_dt_board_init(void)
> +{
> +	of_platform_bus_probe(NULL, mx51_dt_match_table, NULL);
> +}
> +
> +static void __init mx51_dt_timer_init(void)
> +{
> +	mx51_clocks_init(32768, 24000000, 22579200, 0);
> +	mx5_clk_dt_init();
> +}
> +
> +static struct sys_timer mxc_timer = {
> +	.init = mx51_dt_timer_init,
> +};
> +
> +static const char *mx51_dt_board_compat[] = {
> +	"fsl,mx51-babbage",
> +	NULL
> +};
> +
> +DT_MACHINE_START(MX51_DT, "Freescale MX51 (Flattened Device Tree)")
> +	.boot_params  = PHYS_OFFSET + 0x100,

You should be able to drop the .boot_params line.

> +	.map_io       = mx51_map_io,
> +	.init_irq     = mx51_init_irq,
> +	.init_machine = mx51_dt_board_init,
> +	.dt_compat    = mx51_dt_board_compat,
> +	.timer        = &mxc_timer,
> +MACHINE_END
> diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
> index 0a19e75..dedb7f9 100644
> --- a/arch/arm/mach-mx5/clock-mx51-mx53.c
> +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
> @@ -15,13 +15,19 @@
>  #include <linux/clk.h>
>  #include <linux/io.h>
>  #include <linux/clkdev.h>
> -
> +#include <linux/err.h>
>  #include <asm/div64.h>
>  
>  #include <mach/hardware.h>
>  #include <mach/common.h>
>  #include <mach/clock.h>
>  
> +#ifdef CONFIG_OF
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_clk.h>
> +#endif /* CONFIG_OF */

You can drop the #ifdef CONFIG_OF here.  linux/of*.h is safe to
include when CONFIG_OF is not selected.

> +
>  #include "crm_regs.h"
>  
>  /* External clock values passed-in by the board code */
> @@ -1432,3 +1438,38 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
>  		MX53_INT_GPT);
>  	return 0;
>  }
> +
> +#ifdef CONFIG_OF
> +static struct clk *mx5_dt_clk_get(struct device_node *np,
> +					const char *output_id, void *data)
> +{
> +	return data;
> +}
> +
> +static __init void mx5_dt_scan_clks(void)
> +{
> +	struct device_node *node;
> +	struct clk *clk;
> +	const char *id;
> +	int rc;
> +
> +	for_each_compatible_node(node, NULL, "clock") {
> +		id = of_get_property(node, "clock-outputs", NULL);
> +		if (!id)
> +			continue;
> +
> +		clk = clk_get_sys(id, NULL);
> +		if (IS_ERR(clk))
> +			continue;
> +
> +		rc = of_clk_add_provider(node, mx5_dt_clk_get, clk);
> +		if (rc)
> +			pr_err("error adding fixed clk %s\n", node->name);
> +	}
> +}
> +
> +void __init mx5_clk_dt_init(void)
> +{
> +	mx5_dt_scan_clks();
> +}
> +#endif

Nitpick: Would it make sense for these 3 functions to be in a separate .c file?

> diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
> index aea2cd3..a28e84a 100644
> --- a/arch/arm/plat-mxc/include/mach/common.h
> +++ b/arch/arm/plat-mxc/include/mach/common.h
> @@ -58,4 +58,5 @@ extern void mxc91231_arch_reset(int, const char *);
>  extern void mxc91231_prepare_idle(void);
>  extern void mx51_efikamx_reset(void);
>  extern int mx53_revision(void);
> +extern void mx5_clk_dt_init(void);
>  #endif
> -- 
> 1.7.1
> 
> 
> _______________________________________________
> linaro-dev mailing list
> linaro-dev at lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev


More information about the devicetree-discuss mailing list