[PATCH V4 0/5] Add MX51 basic DT support

Jason Liu jason.hui at linaro.org
Thu Mar 10 15:59:40 EST 2011


From: Jason Liu <Jason Liu jason.hui at linaro.org>

This patchset adds Freescale i.mx51 device tree support.
This is based on

git://git.secretlab.ca/git/linux-2.6 devicetree/test

This patch has been tested on MX51 babbage board and can
boot up succesfully to linux console with DT enabled.

Grant, I think it's almost ready for you to merge it.

V4:
- Add Linaro sign off and copyrightt

V3:
- prefix the property name with the vendor name as like:
   "fsl,has-rts-cts" and "fsl,irda-mode"
- use the ttymxc0 as the console
- add FEC support, nfs can be used now

Jason Liu (5):
  arm/dt: add basic mx51 device tree support
  arm/dt: add very basic dts file for babbage board
  serial/imx: parse from device tree support
  net/fec: check id_entry pointer before using it
  net/fec: add device tree matching support

 arch/arm/boot/dts/babbage.dts           |  122 +++++++++++++++++++++++++++++++
 arch/arm/mach-mx5/Kconfig               |    8 ++
 arch/arm/mach-mx5/Makefile              |    1 +
 arch/arm/mach-mx5/board-dt.c            |   65 ++++++++++++++++
 arch/arm/mach-mx5/clock-mx51-mx53.c     |   43 +++++++++++-
 arch/arm/plat-mxc/include/mach/common.h |    1 +
 drivers/net/fec.c                       |   25 +++++--
 drivers/tty/serial/imx.c                |   79 +++++++++++++++++---
 8 files changed, 327 insertions(+), 17 deletions(-)
 create mode 100644 arch/arm/boot/dts/babbage.dts
 create mode 100644 arch/arm/mach-mx5/board-dt.c



More information about the devicetree-discuss mailing list